Analysis of the Localization of Schizosaccharomyces pombe Glucan Synthases in the Presence of the Antifungal Agent Caspofungin.

In recent years, invasive fungal infections have emerged as a common source of infections in immunosuppressed patients. All fungal cells are surrounded by a cell wall that is essential for cell integrity and survival. It prevents cell death and lysis resulting from high internal turgor pressure. Since the cell wall is not present in animal cells, it is an ideal target for selective invasive fungal infection treatments. The antifungal family known as echinocandins, which specifically inhibit the synthesis of the cell wall ß(13)glucan, has been established as an alternative treatment for mycoses. To explore the mechanism of action of these antifungals, we analyzed the cell morphology and glucan synthases localization in Schizosaccharomyces pombe cells during the initial times of growth in the presence of the echinocandin drug caspofungin. S. pombe are rod-shaped cells that grow at the poles and divide by a central division septum. The cell wall and septum are formed by different glucans, which are synthesized by four essential glucan synthases: Bgs1, Bgs3, Bgs4, and Ags1. Thus, S. pombe is not only a perfect model for studying the synthesis of the fungal ß(1-3)glucan, but also it is ideal for examining the mechanisms of action and resistance of cell wall antifungals. Herein, we examined the cells in a drug susceptibility test in the presence of either lethal or sublethal concentrations of caspofungin, finding that exposure to the drug for long periods at high concentrations (>10 µg/mL) induced cell growth arrest and the formation of rounded, swollen, and dead cells, whereas low concentrations (<10 µg/mL) permitted cell growth with a mild effect on cell morphology. Interestingly, short-term treatments with either high or low concentrations of the drug induced effects contrary to those observed in the susceptibility tests. Thus, low drug concentrations induced a cell death phenotype that was not observed at high drug concentrations, which caused transient fungistatic cell growth arrest. After 3 h, high concentrations of the drug caused the following: (i) a decrease in the GFP-Bgs1 fluorescence level; (ii) altered locations of Bgs3, Bgs4, and Ags1; and (iii) a simultaneous accumulation of cells with calcofluor-stained incomplete septa, which at longer times resulted in septation uncoupling from plasma membrane ingression. The incomplete septa revealed with calcofluor were found to be complete when observed via the membrane-associated GFP-Bgs or Ags1-GFP. Finally, we found that the accumulation of incomplete septa depended on Pmk1, the last kinase of the cell wall integrity pathway.

Echinocandin Drugs Induce Differential Effects in Cytokinesis Progression and Cell Integrity.

Fission yeast contains three essential ß(1,3)-D-glucan synthases (GSs), Bgs1, Bgs3, and Bgs4, with non-overlapping roles in cell integrity and morphogenesis. Only the bgs4+ mutants pbr1-8 and pbr1-6 exhibit resistance to GS inhibitors, even in the presence of the wild-type (WT) sequences of bgs1+ and bgs3+. Thus, Bgs1 and Bgs3 functions seem to be unaffected by those GS inhibitors. To learn more about echinocandins' mechanism of action and resistance, cytokinesis progression and cell death were examined by time-lapse fluorescence microscopy in WT and pbr1-8 cells at the start of treatment with sublethal and lethal concentrations of anidulafungin, caspofungin, and micafungin. In WT, sublethal concentrations of the three drugs caused abundant cell death that was either suppressed (anidulafungin and micafungin) or greatly reduced (caspofungin) in pbr1-8 cells. Interestingly, the lethal concentrations induced differential phenotypes depending on the echinocandin used. Anidulafungin and caspofungin were mostly fungistatic, heavily impairing cytokinesis progression in both WT and pbr1-8. As with sublethal concentrations, lethal concentrations of micafungin were primarily fungicidal in WT cells, causing cell lysis without impairing cytokinesis. The lytic phenotype was suppressed again in pbr1-8 cells. Our results suggest that micafungin always exerts its fungicidal effect by solely inhibiting Bgs4. In contrast, lethal concentrations of anidulafungin and caspofungin cause an early cytokinesis arrest, probably by the combined inhibition of several GSs.

Analysis and application of a suite of recombinant endo-ß(1,3)-D-glucanases for studying fungal cell walls.

BACKGROUND: The fungal cell wall is an essential and robust external structure that protects the cell from the environment. It is mainly composed of polysaccharides with different functions, some of which are necessary for cell integrity. Thus, the process of fractionation and analysis of cell wall polysaccharides is useful for studying the function and relevance of each polysaccharide, as well as for developing a variety of practical and commercial applications. This method can be used to study the mechanisms that regulate cell morphogenesis and integrity, giving rise to information that could be applied in the design of new antifungal drugs. Nonetheless, for this method to be reliable, the availability of trustworthy commercial recombinant cell wall degrading enzymes with non-contaminating activities is vital. RESULTS: Here we examined the efficiency and reproducibility of 12 recombinant endo-ß(1,3)-D-glucanases for specifically degrading the cell wall ß(1,3)-D-glucan by using a fast and reliable protocol of fractionation and analysis of the fission yeast cell wall. This protocol combines enzymatic and chemical degradation to fractionate the cell wall into the four main polymers: galactomannoproteins, α-glucan, ß(1,3)-D-glucan and ß(1,6)-D-glucan. We found that the GH16 endo-ß(1,3)-D-glucanase PfLam16A from Pyrococcus furiosus was able to completely and reproducibly degrade ß(1,3)-D-glucan without causing the release of other polymers. The cell wall degradation caused by PfLam16A was similar to that of Quantazyme, a recombinant endo-ß(1,3)-D-glucanase no longer commercially available. Moreover, other recombinant ß(1,3)-D-glucanases caused either incomplete or excessive degradation, suggesting deficient access to the substrate or release of other polysaccharides. CONCLUSIONS: The discovery of a reliable and efficient recombinant endo-ß(1,3)-D-glucanase, capable of replacing the previously mentioned enzyme, will be useful for carrying out studies requiring the digestion of the fungal cell wall ß(1,3)-D-glucan. This new commercial endo-ß(1,3)-D-glucanase will allow the study of the cell wall composition under different conditions, along the cell cycle, in response to environmental changes or in cell wall mutants. Furthermore, this enzyme will also be greatly valuable for other practical and commercial applications such as genome research, chromosomes extraction, cell transformation, protoplast formation, cell fusion, cell disruption, industrial processes and studies of new antifungals that specifically target cell wall synthesis.

Two S. pombe septation phases differ in ingression rate, septum structure, and response to F-actin loss.

In fission yeast, cytokinesis requires a contractile actomyosin ring (CR) coupled to membrane and septum ingression. Septation proceeds in two phases. In anaphase B, the septum ingresses slowly. During telophase, the ingression rate increases, and the CR becomes dispensable. Here, we explore the relationship between the CR and septation by analyzing septum ultrastructure, ingression, and septation proteins in cells lacking F-actin. We show that the two phases of septation correlate with septum maturation and the response of cells to F-actin removal. During the first phase, the septum is immature and, following F-actin removal, rapidly loses the Bgs1 glucan synthase from the membrane edge and fails to ingress. During the second phase, the rapidly ingressing mature septum can maintain a Bgs1 ring and septum ingression without F-actin, but ingression becomes Cdc42 and exocyst dependent. Our results provide new insights into fungal cytokinesis and reveal the dual function of CR as an essential landmark for the concentration of Bgs1 and a contractile structure that maintains septum shape and synthesis.

Specific detection of fission yeast primary septum reveals septum and cleavage furrow ingression during early anaphase independent of mitosis completion.

It is widely accepted in eukaryotes that the cleavage furrow only initiates after mitosis completion. In fission yeast, cytokinesis requires the synthesis of a septum tightly coupled to cleavage furrow ingression. The current cytokinesis model establishes that simultaneous septation and furrow ingression only initiate after spindle breakage and mitosis exit. Thus, this model considers that although Cdk1 is inactivated at early-anaphase, septation onset requires the long elapsed time until mitosis completion and full activation of the Hippo-like SIN pathway. Here, we studied the precise timing of septation onset regarding mitosis by exploiting both the septum-specific detection with the fluorochrome calcofluor and the high-resolution electron microscopy during anaphase and telophase. Contrarily to the existing model, we found that both septum and cleavage furrow start to ingress at early anaphase B, long before spindle breakage, with a slow ingression rate during anaphase B, and greatly increasing after telophase onset. This shows that mitosis and cleavage furrow ingression are not concatenated but simultaneous events in fission yeast. We found that the timing of septation during early anaphase correlates with the cell size and is regulated by the corresponding levels of SIN Etd1 and Rho1. Cdk1 inactivation was directly required for timely septation in early anaphase. Strikingly the reduced SIN activity present after Cdk1 loss was enough to trigger septation by immediately inducing the medial recruitment of the SIN kinase complex Sid2-Mob1. On the other hand, septation onset did not depend on the SIN asymmetry establishment, which is considered a hallmark for SIN activation. These results recalibrate the timing of key cytokinetic events in fission yeast; and unveil a size-dependent control mechanism that synchronizes simultaneous nuclei separation with septum and cleavage furrow ingression to safeguard the proper chromosome segregation during cell division.

Extracellular cell wall ß(1,3)glucan is required to couple septation to actomyosin ring contraction.

Cytokinesis has been extensively studied in different models, but the role of the extracellular cell wall is less understood. Here we studied this process in fission yeast. The essential protein Bgs4 synthesizes the main cell wall ß(1,3)glucan. We show that Bgs4-derived ß(1,3)glucan is required for correct and stable actomyosin ring positioning in the cell middle, before the start of septum formation and anchorage to the cell wall. Consequently, ß(1,3)glucan loss generated ring sliding, oblique positioned rings and septa, misdirected septum synthesis indicative of relaxed rings, and uncoupling between a fast ring and membrane ingression and slow septum synthesis, suggesting that cytokinesis can progress with defective septum pushing and/or ring pulling forces. Moreover, Bgs4-derived ß(1,3)glucan is essential for secondary septum formation and correct primary septum completion. Therefore, our results show that extracellular ß(1,3)glucan is required for cytokinesis to connect the cell wall with the plasma membrane and for contractile ring function, as proposed for the equivalent extracellular matrix in animal cells.

Fission yeast Ags1 confers the essential septum strength needed for safe gradual cell abscission.

Fungal cytokinesis requires the assembly of a dividing septum wall. In yeast, the septum has to be selectively digested during the critical cell separation process. Fission yeast cell wall α(1-3)glucan is essential, but nothing is known about its localization and function in the cell wall or about cooperation between the α- and ß(1-3)glucan synthases Ags1 and Bgs for cell wall and septum assembly. Here, we generate a physiological Ags1-GFP variant and demonstrate a tight colocalization with Bgs1, suggesting a cooperation in the important early steps of septum construction. Moreover, we define the essential functions of α(1-3)glucan in septation and cell separation. We show that α(1-3)glucan is essential for both secondary septum formation and the primary septum structural strength needed to support the physical forces of the cell turgor pressure during cell separation. Consequently, the absence of Ags1 and therefore α(1-3)glucan generates a special and unique side-explosive cell separation due to an instantaneous primary septum tearing caused by the turgor pressure.

Differential activities of three families of specific beta(1,3)glucan synthase inhibitors in wild-type and resistant strains of fission yeast.

Three specific ß(1,3)glucan synthase (GS) inhibitor families, papulacandins, acidic terpenoids, and echinocandins, have been analyzed in Schizosaccharomyces pombe wild-type and papulacandin-resistant cells and GS activities. Papulacandin and enfumafungin produced similar in vivo effects, different from that of echinocandins. Also, papulacandin was the strongest in vitro GS inhibitor (IC(50) 10(3)-10(4)-fold lower than with enfumafungin or pneumocandin), but caspofungin was by far the most efficient antifungal because of the following. 1) It was the only drug that affected resistant cells (minimal inhibitory concentration close to that of the wild type). 2) It was a strong inhibitor of wild-type GS (IC(50) close to that of papulacandin). 3) It was the best inhibitor of mutant GS. Moreover, caspofungin showed a special effect for two GS inhibition activities, of high and low affinity, separated by 2 log orders, with no increase in inhibition. pbr1-8 and pbr1-6 resistances are due to single substitutions in the essential Bgs4 GS, located close to the resistance hot spot 1 region described in Saccharomyces and Candida Fks mutants. Bgs4(pbr)(1-8) contains the E700V change, four residues N-terminal from hot spot 1 defining a larger resistance hot spot 1-1 of 13 amino acids. Bgs4(pbr)(1-6) contains the W760S substitution, defining a new resistance hot spot 1-2. We observed spontaneous revertants of the spherical pbr1-6 phenotype and found that an additional A914V change is involved in the recovery of the wild-type cell shape, but it maintains the resistance phenotype. A better understanding of the mechanism of action of the antifungals available should help to improve their activity and to identify new antifungal targets.

The (1,3)beta-D-glucan synthase subunit Bgs1p is responsible for the fission yeast primary septum formation.

Cytokinesis is a crucial event in the cell cycle of all living cells. In fungal cells, it requires co-ordinated contraction of an actomyosin ring and synthesis of both plasmatic membrane and a septum structure that will constitute the new cell wall end. Schizosaccharomyces pombe contains four essential putative (1,3)beta-d-glucan synthase catalytic subunits, Bgs1p to Bgs4p. Here we examined the function of Bgs1p in septation by studying the lethal phenotypes of bgs1(+) shut-off and bgs1Delta cells and demonstrated that Bgs1p is responsible and essential for linear (1,3)beta-d-glucan and primary septum formation. bgs1(+) shut-off generates a more than 300-fold Bgs1p reduction, but the septa still present large amounts of disorganized linear (1,3)beta-d-glucan and partial primary septa. Conversely, both structures are absent in bgs1Delta cells, where there is no Bgs1p. The septum analysis of bgs1(+)-repressed cells indicates that linear (1,3)beta-d-glucan is necessary but not sufficient for primary septum formation. Linear (1,3)beta-d-glucan is the polysaccharide that specifically interacts with the fluorochrome Calcofluor white in fission yeast. We also show that in the absence of Bgs1p abnormal septa are formed, but the cells cannot separate and eventually die.