Active Osteoblasts or Quiescent Bone Lining Cells? Preosteoblasts Fate Orchestrated by Curvature and Stiffness of an In Vitro 2.5D Biomimetic Culture System.

Biomimetic cell culture systems are required to provide more physiologically relevant microenvironments for bone cells. Here, a simple 2.5D culture platform is proposed, combining adjustable stiffness and surface features that mimic bone topography by using sandpaper grits as master molds with two stiffness formulations of polydimethylsiloxane (PDMS). The subsequent replicas perfectly conform the grits and reproduce the corresponding negative relief with cavities separated by convex edges. Biomimicry is also provided by an extracellular matrix (ECM)-like thin film coating, using the layer-by-layer (LbL) method. The topographical features, alternating concave, and convex structures drive preosteoblasts organization and morphology. Strikingly, curvature orchestrates the commitment of preosteoblasts, with i) maturation to active osteoblasts able to produce a dense collagenous matrix that ultimately mineralizes in the cavities, and ii) edges hosting quiescent cells that synthetize a very thin immature collagen layer with no mineralization. In summary, the present in vitro culture system model offers a cell-instructive 2.5D microenvironment that controls preosteoblasts fate, leading to two coexisting subpopulations: mature osteoblasts and bone lining cells (BLC). This promising culture system opens new avenues to advanced tissue-engineered modeling and can be applied to precellularized bone biomaterials.

Dual-functional antibacterial and osteogenic nisin-based layer-by-layer coatings.

Implanted biomaterials can be regarded in a cornerstone in the domain of bone surgery. Their surfaces are expected to fulfil two particular requirements: preventing the settlement and the development of bacteria, and stimulating bone cells in view to foster osseointegration. Therefore, a modern approach consists in the design of dual functional coatings with both antibacterial and osteogenic features. To this end, we developed ultrathin Layer-by-Layer (LbL) coatings composed of biocompatible polyelectrolytes, namely chondroitin sulfate A (CSA) and poly-l-lysine (PLL). The coatings were crosslinked with genipin (GnP), a natural and biocompatible crosslinking agent, to increase their resistance against environmental changes, and to confer them adequate mechanical properties with regards to bone cell behaviors. Antibacterial activity was obtained with nisin Z, an antimicrobial peptide (AMP), which is active against gram-positive bacteria. The coatings had a significant bactericidal impact upon Staphylococcus aureus, with fully maintained bone cell adhesion, proliferation and osteogenic differentiation.

Nisin-based antibacterial and antiadhesive layer-by-layer coatings.

Some removable medical devices such as catheters and cardiovascular biomaterials require antiadhesive properties towards both prokaryotic and eukaryotic cells in order to prevent the tissues from infections upon implantation and, from alteration upon removal. In order to inhibit cell adhesion, we developed ultrathin hydrated Layer-by-Layer (LbL) coatings composed of biocompatible polyelectrolytes, namely chondroitin sulfate A (CSA) and poly-l-lysine (PLL). The coatings were crosslinked with genipin (GnP), a natural and biocompatible crosslinking agent, to increase their resistance against environmental changes. In order to confer antibacterial activity to the coatings, we proceeded to the electrostatically-driven immobilization of nisin Z, an antimicrobial peptide (AMP) active against gram-positive bacteria. The nisin-enriched coatings had a significantly increased anti-proliferative impact on fibroblasts, as well as a strong contact-killing activity against Staphylococcus aureus in the short and long term.

Biomimetic matrix for the study of neuroblastoma cells: A promising combination of stiffness and retinoic acid.

Neuroblastoma is the third most common pediatric cancer composed of malignant immature cells that are usually treated pharmacologically by all trans-retinoic acid (ATRA) but sometimes, they can spontaneously differentiate into benign forms. In that context, biomimetic cell culture models are warranted tools as they can recapitulate many of the biochemical and biophysical cues of normal or pathological microenvironments. Inspired by that challenge, we developed a neuroblastoma culture system based on biomimetic LbL films of physiological biochemical composition and mechanical properties. For that, we used chondroitin sulfate A (CSA) and poly-L-lysine (PLL) that were assembled and mechanically tuned by crosslinking with genipin (GnP), a natural biocompatible crosslinker, in a relevant range of stiffness (30-160 kPa). We then assessed the adhesion, survival, motility, and differentiation of LAN-1 neuroblastoma cells. Remarkably, increasing the stiffness of the LbL films induced neuritogenesis that was strengthened by the combination with ATRA. These results highlight the crucial role of the mechanical cues of the neuroblastoma microenvironment since it can dramatically modulate the effect of pharmacologic drugs. In conclusion, our biomimetic platform offers a promising tool to help fundamental understanding and pharmacological screening of neuroblastoma differentiation and may assist the design of translational biomaterials to support neuronal regeneration. STATEMENT OF SIGNIFICANCE: Neuroblastoma is one of the most common pediatric tumor commonly treated by the administration of all-trans-retinoic acid (ATRA). Unfortunately, advanced neuroblastoma often develop ATRA resistance. Accordingly, in the field of pharmacological investigations on neuroblastoma, there is a tremendous need of physiologically relevant cell culture systems that can mimic normal or pathological extracellular matrices. In that context, we developed a promising matrix-like cell culture model that provides new insights on the crucial role of mechanical properties of the microenvironment upon the success of ATRA treatment on the neuroblastoma maturation. We were able to control adhesion, survival, motility, and differentiation of neuroblastoma cells. More broadly, we believe that our system will help the design of in vitro pharmacological screening strategy.

Hyaluronan-based hydrogels as versatile tumor-like models: Tunable ECM and stiffness with genipin-crosslinking.

Three-dimensional (3D) biomimetic cell culture platforms offer more realistic microenvironments that cells naturally experience in vivo. We developed a tunable hyaluronan-based hydrogels that could easily be modified to mimic healthy or malignant extracellular matrices (ECMs). For that, we pre-functionalized our hydrogels with an adhesive polypeptide (poly-l-lysine, PLL) or ECM proteins (type III and type IV collagens), naturally present in tumorous tissues, and next, we tuned their stiffness by crosslinking with gradual concentrations of genipin (GnP). Then, we thoroughly characterized our substrates before testing them with glioblastoma and breast cancer cells, and thereafter with endothelial cells. Overall, our hydrogels exhibited (a) increasing stiffness with GnP concentration for every pre-functionalization and (b) efficient enzyme resistance with PLL treatment, and also with type IV collagen but to a lesser extent. While PLL-treated hydrogels were not favorable to the culture of any glioblastoma cell lines, they enhanced the proliferation of breast cancer cells in a stiffness-dependent manner. Contrary to type III collagen, type IV collagen pre-treated hydrogels supported the proliferation of glioblastoma cells. The as-desired HA-based 3D tumor-like models we developed may provide a useful platform for the study of various cancer cells by simply tuning their biochemical composition and their mechanical properties.

Development of a novel functional core-shell-shell nanoparticles: From design to anti-bacterial applications.

This article reports the synthesis and functionalization of a novel CuO@SiO2-APTES@Ag0 core-shell-shell material using a simple and low-cost process. The growth, design strategies and synthesis approach are the key factors for the development of CuO@SiO2-APTES@Ag0 as efficient material with enhanced antibacterial activity. We investigated the morphology, surface charge, structure and stability of our new core-shell-shell by atomic force microscopy, scanning electron microscopy, energy dispersive X-ray, Fourier transform infrared and UV-visible spectroscopies, zeta potential measurements, and differential scanning calorimetry. The covalent surface grafting of APTES (3-(aminopropyl)triethoxysilane) onto CuO@SiO2 involving electrostatic interactions was confirmed. Size measurements and Scanning electron images showed that both APTES grafting and SiO2/Ag shells dropped on the surface of CuO produced structural compaction. UV-Vis spectroscopy proved to be a fast and convenient way to optically detect SiO2 shell on the surface of colloids. Additionally, the Ag-decorated CuO@SiO2-APTES surfaces were found to possess antibacterial activity and thermally more stable than undecorated surfaces. CuO@SiO2-APTES@Ag0 core-shell had antibacterial properties against Gram-positive bacteria making it a promising candidate for antibacterial applications.

Synergistic influence of topomimetic and chondroitin sulfate-based treatments on osteogenic potential of Ti-6Al-4V.

We combined topographical and chemical surface modifications of Ti-6Al-4V (TA6V) to improve its osteogenic potential. By acid-etching, we first generated topomimetic surface features resembling, in size and roughness, bone cavities left by osteoclasts. Next, we coated these surfaces with biomimetic Layer-by-Layer films (LbL), composed of chondroitin sulfate A and poly-l-lysine that were mechanically tuned after a post-treatment with genipin. The structural impact of each surface processing step was thoroughly inspected. The desired nano/microrough topographies of TA6V were maintained upon LbL deposition. Whereas no significant promotion of adhesion and proliferation of MC3T3-E1 preosteoblasts were detected after independent or combined modifications of the topography and the chemical composition of the substrates, osteogenic maturation was promoted when both surface treatments were combined, as was evidenced by significant long-term matrix mineralization. The results open promising route toward improved osseointegration of titanium-based implants. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1988-2000, 2016.

Atmospheric Solid Analysis Probe-Ion Mobility Mass Spectrometry: An Original Approach to Characterize Grafting on Cyclic Olefin Copolymer Surfaces.

A cyclic olefin copolymer (COC) was grafted with aryl layers from aryldiazonium salts, and then we combined infrared spectrometry, atomic force microscopy (AFM), and ion mobility mass spectrometry with atmospheric solid analysis probe ionization (ASAP-IM-MS) to characterize the aryl layers. ASAP is a recent atmospheric ionization method dedicated to the direct analysis of solid samples. We demonstrated that ASAP-IM-MS is complementary to other techniques for characterizing bromine and sulfur derivatives of COC on surfaces. ASAP-IM-MS was useful for optimizing experimental grafting conditions and to elucidate hypotheses around aryl layer formation during the grafting process. Thus, ASAP-IM-MS is a good candidate tool to characterize covalent grafting on COC surfaces.

Genipin-cross-linked layer-by-layer assemblies: biocompatible microenvironments to direct bone cell fate.

The design of biomimetic coatings capable of improving the osseointegration of bone biomaterials is a current challenge in the field of bone repair. Toward this end, layer-by-layer (LbL) films composed of natural components are suitable candidates. Chondroitin sulfate A (CSA), a natural glycosaminoglycan (GAG), was used as the polyanionic component because it promotes osteoblast maturation in vivo. In their native state, GAG-containing LbL films are generally cytophobic because of their low stiffness. To stiffen our CSA-based LbL films, genipin (GnP) was used as a natural cross-linking agent, which is much less cytotoxic than conventional chemical cross-linkers. GnP-cross-linked films display an original combination of microscale topography and tunable mechanical properties. Structural characterization was partly based on a novel donor/acceptor Förster resonance energy transfer (FRET) couple, namely, FITC/GnP, which is a promising approach for further inspection of any GnP-cross-linked system. GnP-cross-linked films significantly promote adhesion, proliferation, and early and late differentiation of preosteoblasts.

Protein-triggered instant disassembly of biomimetic Layer-by-Layer films.

Layer-by-Layer (LbL) coatings are promising tools for the biofunctionalization of biomaterials, as they allow stress-free immobilization of proteins. Here, we explore the possibility to immobilize phosvitin, a highly phosphorylated protein viewed as a model of bone phosphoproteins and, as such, a potential promotive agent of surface-directed biomineralization, into biomimetic LbL architectures. Two immobilization protocols are attempted, first, using phosvitin as the polyanionic component of phosvitin/poly-(L-lysine) films and, second, adsorbing it onto preformed chondroitin sulfate/poly-(L-lysine) films. Surprisingly, it is neither possible to embed phosvitin as the constitutive polyanion of the LbL architectures nor to adsorb it atop preformed films. Instead, phosvitin triggers instant massive film disassembly. This unexpected, incidentally detected behavior constitutes the first example of destructive interactions between LbL films and a third polyelectrolyte, a fortiori a protein, which might open a route toward new stimuli-responsive films for biosensing or drug delivery applications. Interestingly, additional preliminary results still indicate a promotive effect of phosvitin-containing remnant films on calcium phosphate deposition.