pH-Induced Association and Dissociation of Intermolecular Complexes Formed by Hydrogen Bonding between Diblock Copolymers.

Poly(sodium styrenesulfonate)⁻block⁻poly(acrylic acid) (PNaSS⁻b⁻PAA) and poly(sodium styrenesulfonate)⁻block⁻poly(N-isopropylacrylamide) (PNaSS⁻b⁻PNIPAM) were prepared via reversible addition⁻fragmentation chain transfer (RAFT) radical polymerization using a PNaSS-based macro-chain transfer agent. The molecular weight distributions (Mw/Mn) of PNaSS⁻b⁻PAA and PNaSS⁻b⁻PNIPAM were 1.18 and 1.39, respectively, suggesting that these polymers have controlled structures. When aqueous solutions of PNaSS⁻b⁻PAA and PNaSS⁻b⁻PNIPAM were mixed under acidic conditions, water-soluble PNaSS⁻b⁻PAA/PNaSS⁻b⁻PNIPAM complexes were formed as a result of hydrogen bonding interactions between the pendant carboxylic acids in the PAA block and the pendant amide groups in the PNIPAM block. The complex was characterized by ¹H NMR, dynamic light scattering, static light scattering, and transmission electron microscope measurements. The light scattering intensity of the complex depended on the mixing ratio of PNaSS⁻b⁻PAA and PNaSS⁻b⁻PNIPAM. When the molar ratio of the N-isopropylacrylamide (NIPAM) and acrylic acid (AA) units was near unity, the light scattering intensity reached a maximum, indicating stoichiometric complex formation. The complex dissociated at a pH higher than 4.0 because the hydrogen bonding interactions disappeared due to deprotonation of the pendant carboxylic acids in the PAA block.

pH-Responsive Intra- and Inter-Molecularly Micelle Formation of Anionic Diblock Copolymer in Water.

Poly(sodium2-(acrylamido)-2-methylpropanesulfonate)-block-poly(sodium11-(acrylamido)undecanoate) (PAMPS⁻PAaU) was synthesized via reversible addition-fragmentation chain transfer (RAFT)-controlled radical polymerization. The "living" polymerization of PAaU was evidenced by the fact that the molecular weight distribution was narrow (Mw/Mn = 1.23). The pH-induced association behavior of PAMPS⁻PAaU in 0.1 M NaCl aqueous solutions as a function of solution pH was investigated by ¹H NMR spin-spin relaxation time, dynamic light scattering (DLS), static light scattering (SLS), and fluorescence probe techniques. These results indicated that PAMPS⁻PAaU formed polymer micelles in 0.1 M NaCl aqueous solutions at pH < 9. At pH = 8⁻9, the polymer formed the micelles intramolecularly due to hydrophobic self-association of the PAaU block within the single polymer chain. On the other hand, at pH < 8, micellization occurred intermolecularly to form polymer micelles comprising hydrophobic PAaU cores and hydrophilic PAMPS shells.

Molecularly imprinted hybrid adsorbents for adenine and adenosine-5'-triphosphate.

Submicrometer-sized silica gel particles were coated with a polyanion and a polycation bearing thymine chromophores. The polymer-coated particles were found to selectively adsorb adenine and adenosine-5'-triphosphate (ATP), as compared to other nucleobases and nucleotides, respectively. The adsorption was enhanced by the irradiation of the particles in the presence of adenine which resulted in the molecular imprinting of adenine. ATP adsorption was strongly pH-dependent.

Flower micelle of amphiphilic random copolymers in aqueous media.

The structure of the flower micelle formed by an amphiphilic random copolymer, sodium (2-acrylamido)-2-methylpropanesulfonate and N-dodecylmethacrylamide p(AMPS/C12), in 0.05 M aqueous NaCl was investigated by fully atomistic molecular dynamics simulation as well as by light scattering, and the results were compared with the flower micelle model of the minimum loop size, recently proposed by Kawata et al. [Macromolecules 2007, 40, 1174-1180]. After a sufficiently long simulation time, simulated p(AMPS/C12) chain with the degree of polymerization of 200 and C12 content of 50 mol % formed a unicore micelle, of which radius of gyration was much smaller than the AMPS homopolymer with the same degree of polymerization. The simulated micellar structure was analyzed in terms of density distribution functions for dodecyl groups, the main chain, and sulfonate groups as functions of the radial distance r from the center of mass of dodecyl groups. Only dodecyl groups exist at r less, similar 1.5 nm, and the main chain and sulfonate groups distribute in the range of r between 1.5 and 3.5 nm, but there were dodecyl groups coexisting with the main chain and sulfonate groups beyond r = 1.5 nm. All these structural features, as well as hydrodynamic radius data for p(AMPS/C12) with C12 contents higher than ca. 20 mol % obtained by light scattering, agreed with the predictions of the flower micelle model of the minimum loop size.

Preparation and characterization of a pH-responsive nanogel based on a photo-cross-linked micelle formed from block copolymers with controlled structure.

Poly(ethylene glycol)-b-poly(2-(diethylamino)ethyl methacrylate-co-2-cinnamoyloxyethyl acrylate) (PEG-b-P(DEAEMA/CEA)) was prepared by reversible addition-fragmentation chain transfer (RAFT)-controlled radical polymerization. As solution pH is increased from an acidic pH, the hydrodynamic radius (R(h)) increases abruptly near pH 7, indicative of the micelle formation at pH > 7. The micelle formation at pH > 7 was supported by (1)H NMR and light scattering data. Upon irradiation of light, polymer chains in the core of the polymer micelle are cross-linked as a result of the photodimerization of the cinnamoyl groups, yielding a nanogel. The nanogel was characterized by gel-permeation chromatography (GPC), light scattering, small-angle X-ray scattering (SAXS), transmission electron microscopy (TEM), and fluorescence techniques. The nanogel displayed an ability to solubilize N-phenyl-1-naphthylamine (PNA) and 1-pyrenemethanol (hydrophobic guest molecules) into the hydrophobic core at pH > 7. It was confirmed with PNA that the solubilization of a guest molecule occurred at polymer concentrations (C(p)) lower than the critical micelle concentration (cmc) for PEG-b-P(DEAEMA/CEA) because the nanogel retains its micellar structure at C(p) < cmc. 1-Pyrenemethanol is strongly captured by the nanogel at pH 10, whereas it is easily released from the nanogel when pH is reduced to 3. This indicates that the hydrophobicity of the core of the nanogel can be modulated by a change in the degree of protonation of the DEAEMA units in the core, and thus the capture of a guest molecule and its release can be controlled by a change in solution pH.

Salt effect on the heat-induced association behavior of gold nanoparticles coated with poly(N-isopropylacrylamide) prepared via reversible addition-fragmentation chain transfer (RAFT) radical polymerization.

Poly(N-isopropylacrylamide) (PNIPAM) with a narrow molecular weight distribution was prepared by reversible addition-fragmentation chain transfer (RAFT) radical polymerization. A dithioester group at the chain end of PNIPAM thus prepared was cleaved by treating with 2-ethanolamine to provide thiol-terminated PNIPAM with which gold nanoparticles were coated via reactions of the terminal thiol with gold. The thermoresponsive nature of the maximum wavelength of the surface plasmon band and hydrodynamic radius (Rh) for the PNIPAM-coated gold nanoparticles were found to be sensitively affected by added salt. In pure water, Rh for the PNIPAM-coated gold nanoparticles at 40 degrees C (>lower critical solution temperature (LCST)) was smaller than that at 25 degrees C (

Cooperative binding of nonionic surfactant to hydrophobically modified polyanions as studied by frontal analysis continuous capillary electrophoresis.

The binding of a nonionic surfactant, Triton X-100 (TX), to amphiphilic copolymers of sodium 2-(acrylamido)-2-methylpropanesulfonate and N-dodecylmethacrylamide (C12) (p(A/C12(x)), where x denotes the mol % content of C12) was investigated by frontal analysis continuous capillary electrophoresis (FACCE) combined with dynamic light scattering focusing on the effect of the hydrophobe content on the binding in a wide range of x (5-60 mol %). From binding isotherms obtained from FACCE data, the binding was found to be cooperative in the whole range of x. Furthermore, a significant change in the binding behavior, i.e., cooperativity, was found to occur in a relatively narrow range of x (38-50 mol %), which is attributable to a change in the self-association behavior of p(A/C12(x)) in this x range.

Studies of dynamic interactions between a pyrene-labeled polyelectrolyte and an oppositely charged rodlike micelle by a fluorescence quenching technique with use of a hydrophobic quencher.

Electrostatic interactions of poly(sodium 2-(acrylamido)-2-methylpropanesulfonate) (PyPAMPS) labeled with pyrene and a rodlike micelle of dimethyloleylamine oxide (DMOAO), an amine oxide type surfactant, mixed with varying mole fractions (Y) of hexadecyltrimethylammonium chloride (CTAC), a cationic surfactant, were investigated by a fluorescence quenching technique using 3,4'-dimethylbenzophenone (DBP), a hydrophobic quencher, that can only reside in the micellar phase. Fluorescence measurements were performed under homogeneous conditions in the region 0Yc, the fluorescence was efficiently quenched by DBP-carrying DMOAO/CTAC mixed micelles, both steady-state and time-dependent fluorescence data indicating that the degree of the quenching and hence the extent of the complex formation increased significantly with increasing Y. Applying a kinetic model to the steady-state and time-dependent fluorescence data, the residence time for PyPAMPS in the polymer-micelle complex was calculated. The residence time was found to depend on both Y and mu, e.g., when Y was increased from 0.01 to 0.03, the residence time increased from 4 to 80 mus at mu=0.05 whereas little or no increase in the residence time was observed in this range of Y at mu=0.20. At this higher ionic strength, the residence time increased only moderately from 3 to 10 mus when Y was increased from 0.01 to 0.09.

Rheological behavior in water of complexes formed from poly(sodium 2-(acrylamido)-2-methylpropanesulfonate) and positively charged rodlike micelles.

The viscoelastic behavior of aqueous solutions of an ionic complex formed from poly(sodium 2-(acrylamido)-2-methylpropanesulfonate) and rodlike mixed micelles of dimethyloleylamine oxide (DMOAO) and hexadecyltrimethylammonium chloride (CTAC) was investigated under oscillatory conditions. The DMOAO/CTAC mixed micelles exhibited high zero-shear viscosities (eta0) depending on the mole fraction of CTAC in the mixed micelle (Y) in the range 0Y0.25. The addition of the polyanion had no effect on the rheological behavior of the mixed micelles when Y<0.02 at an ionic strength (mu) of 0.2. However, when Y was increased to a certain level (Yc), eta0 decreased drastically; Yc depended on mu but not on the polymer concentration. These observations indicate the formation of an ionic complex between the polymer and micelle when YYc. The reciprocal of steady-state compliance (Je(-1)) began to decrease gradually at Y approximately Yc and then leveled off at Y>0.06. The relaxation time (tau) was found to be more strongly dependent on Y. Thus, the large decrease in eta0 was attributed mainly to a decrease in tau while the number density of junctions decreased only slightly. Therefore, it is concluded that polymer-micelle complex maintains a rodlike structure with some entanglements remaining at Y<0.12.

Synthesis of well-defined amphiphilic block copolymers having phospholipid polymer sequences as a novel biocompatible polymer micelle reagent.

To realize safer and effective drug administration, novel well-defined and biocompatible amphiphilic block copolymers containing phospholipid polymer sequences were synthesized. At first, the homopolymer of 2-methacryloyloxyethylphosphorylcholine (MPC) was synthesized in water by reversible addition-fragmentation chain transfer (RAFT) controlled radical polymerization. The "living" polymerization was confirmed by the fact that the number-average molecular weight increased linearly with monomer conversion while the molecular weight distribution remained narrow independent of the conversion. The poly(MPC) thus prepared is end-capped with a dithioester moiety. Using the dithioester-capped poly(MPC) as a macro chain transfer agent, AB diblock copolymers of MPC and n-butyl methacrylate (BMA) were synthesized. Associative properties of the amphiphilic block copolymer (pMPC(m)-BMA(n)) with varying poly(BMA) block lengths were investigated using NMR, fluorescence probe, static light scattering (SLS), and quasi-elastic light scattering (QELS) techniques. Proton NMR data in D2O indicated highly restricted motions of the n-butyl moieties, arising from hydrophobic associations of poly(BMA) blocks. Fluorescence spectra of N-phenyl-1-naphthylamine indicated that the probes were solubilized in the polymer micelles in water. The formation of polymer micelles comprising a core with poly(BMA) blocks and shell with hydrophilic poly(MPC) blocks was suggested by SLS and QELS data. The size and mass of the micelle increased with increasing poly(BMA) block length. With an expectation of a pharmaceutical application of pMPC(m)-BMA(n), solubilization of a poorly water-soluble anticancer agent, paclitaxel (PTX), was investigated. PTX dissolved well in aqueous solutions of pMPC(m)-BMA(n) as compared with pure water, implying that PTX is incorporated into the hydrophobic core of the polymer micelle. Since excellent biocompatible poly(MPC) sequences form an outer shell of the micelle, pMPC(m)-BMA(n) may find application as a promising reagent to make a good formulation with a hydrophobic drug.