ABSTRACT
Methylmercaptan (MM) is a marker of periodontal disease; however, the required sensitivity for MM is parts per billion, which has been challenging to realize with a simple sensor. Here, we report the capability to detect MM at concentrations as low as 20 ppb using layered manganese oxide nanosheets with a quartz crystal microbalance sensor. The sensing capabilities of the manganese oxide nanosheets are promoted by adsorbed water present on and between the nanosheets. The strong adsorption of MM to the sensor, which is necessary for the high sensitivity, leads to significant hysteresis in the response on cycling due to irreversible adsorption. However, the sensor can be readily reset by heating to 80 °C, which leads to highly reproducible response to MM vapor at low concentrations. A key aspect of this sensor design is the high selectivity toward MM in comparison to other compounds such as ethanol, ammonia, acetaldehyde, acetic acid, toluene, and pyridine. This layered nanosheets design for high-sensitivity sensors, demonstrated here for dilute MM, holds significant promise for addressing needs to identify sulfur compounds associated for environmental protection and medical diagnostics.
Subject(s)
Gases/analysis , Manganese Compounds/chemistry , Nanoshells/chemistry , Oxides/chemistry , Quartz Crystal Microbalance Techniques , Sulfhydryl Compounds/analysis , Particle Size , Surface PropertiesABSTRACT
We fabricated slippery liquid-immobilized coating (SLIC) films by reacting a slippery liquid (polymethylhydrosiloxane) near the surface of a polyelectrolyte film containing silver ions prepared by the layer-by-layer method. The obtained films maintained their slipperiness after chemical and physical treatments, in contrast to slippery liquid-infused porous surfaces. The high chemical and physical stabilities of the films were attributable to gelation and immobilization of the lubricant owing to an oxidation-reduction reaction with subsequent dehydration condensation of Si-OH on the outer surface of the polyelectrolyte film and the bonding of Si-H with NH2 groups within the polyelectrolyte film, respectively. Moreover, the SLIC films exhibited a high degree of slipperiness with respect to low-surface-tension liquids. To the best of our knowledge, this technique of lubricant immobilization using silver ions has not been reported previously. The films should be suitable for use in various applications where contamination must be prevented under extreme conditions, such as those requiring high physical durability and organic solvent use.
ABSTRACT
Reflection from various surfaces of many optical systems, such as photovoltaics and displays, is a critical issue for their performance, and antireflection coatings play a pivotal role in a wide variety of optical technologies, reducing light reflectance loss and hence maximizing light transmission. With the current movement toward optically transparent polymeric media and coatings for antireflection technology, the need for economical and environmentally friendly materials and methods without dependence on shape or size has clearly been apparent. Herein, we demonstrate novel antireflection coatings composed of chitin nanofibers (CHINFs), extracted from crab shell as a biomass material through an aqueous-based layer-by-layer self-assembly process to control the porosity. Increasing the number of air spaces inside the membrane led low refractive index, and precise control of refractive index derived from the stacking of the CHINFs achieved the highest transmittance with investigating the surface structure and the refractive index depending on the solution pH. At a wavelength of 550 nm, the transmittance of the coatings was 96.4%, which was 4.8% higher than that of a glass substrate, and their refractive index was 1.30. Further critical properties of the films were the durability and the antifogging performance derived from the mechanical stability and hydrophilicity of CHINFs, respectively. The present study may contribute to a development of systematically designed nanofibrous films which are suitable for optical applications operating at a broadband visible wavelength with durability and antifog surfaces.
ABSTRACT
A polyelectrolyte film containing metastable silver ions was applied as a quartz crystal microbalance (QCM) gas detector. The polyelectrolyte film was obtained by immersing a polyelectrolyte with numerous amine groups in a metal ion solution. The QCM detector with silver ions responded to a very low methylmercaptan gas concentration (20 ppb) but did not respond to ammonia, volatile amines, aromatic compounds, or alcohols. The response speed of the QCM detector increased gradually with increasing methylmercaptan concentrations. The highly sensitive and selective response is promoted by a ligand substitution reaction caused by the formation of coordinative bonds between a metastable silver ion and amine groups in the polyelectrolyte film. To the best of our knowledge, this system has the highest sensitivity among reported QCM gas detectors. Such high-sensitivity among reported QCM gas detectors. Such high-sensitivity gas detectors for volatile sulfur compounds have wide ranging applications in areas such as volcanic eruption prediction, food inspection, environmental analysis, and medical diagnostics.
