Liver specification of human iPSC-derived endothelial cells transplanted into mouse liver.

Background & Aims: Liver sinusoidal endothelial cells (LSECs) are important in liver development, regeneration, and pathophysiology, but the differentiation process underlying their tissue-specific phenotype is poorly understood and difficult to study because primary human cells are scarce. The aim of this study was to use human induced pluripotent stem cell (hiPSC)-derived LSEC-like cells to investigate the differentiation process of LSECs. Methods: hiPSC-derived endothelial cells (iECs) were transplanted into the livers of Fah-/-/Rag2-/-/Il2rg-/- mice and assessed over a 12-week period. Lineage tracing, immunofluorescence, flow cytometry, plasma human factor VIII measurement, and bulk and single cell transcriptomic analysis were used to assess the molecular and functional changes that occurred following transplantation. Results: Progressive and long-term repopulation of the liver vasculature occurred as iECs expanded along the sinusoids between hepatocytes and increasingly produced human factor VIII, indicating differentiation into LSEC-like cells. To chart the developmental profile associated with LSEC specification, the bulk transcriptomes of transplanted cells between 1 and 12 weeks after transplantation were compared against primary human adult LSECs. This demonstrated a chronological increase in LSEC markers, LSEC differentiation pathways, and zonation. Bulk transcriptome analysis suggested that the transcription factors NOTCH1, GATA4, and FOS have a central role in LSEC specification, interacting with a network of 27 transcription factors. Novel markers associated with this process included EMCN and CLEC14A. Additionally, single cell transcriptomic analysis demonstrated that transplanted iECs at 4 weeks contained zonal subpopulations with a region-specific phenotype. Conclusions: Collectively, this study confirms that hiPSCs can adopt LSEC-like features and provides insight into LSEC specification. This humanised xenograft system can be applied to further interrogate LSEC developmental biology and pathophysiology, bypassing current logistical obstacles associated with primary human LSECs. Impact and implications: Liver sinusoidal endothelial cells (LSECs) are important cells for liver biology, but better model systems are required to study them. We present a pluripotent stem cell xenografting model that produces human LSEC-like cells. A detailed and longitudinal transcriptomic analysis of the development of LSEC-like cells is included, which will guide future studies to interrogate LSEC biology and produce LSEC-like cells that could be used for regenerative medicine.

Engineering transplantable human lymphatic and blood capillary networks in a porous scaffold.

Due to a relative paucity of studies on human lymphatic assembly in vitro and subsequent in vivo transplantation, capillary formation and survival of primary human lymphatic (hLEC) and blood endothelial cells (hBEC) ± primary human vascular smooth muscle cells (hvSMC) were evaluated and compared in vitro and in vivo. hLEC ± hvSMC or hBEC ± hvSMC were seeded in a 3D porous scaffold in vitro, and capillary percent vascular volume (PVV) and vascular density (VD)/mm2 assessed. Scaffolds were also transplanted into a sub-cutaneous rat wound with morphology/morphometry assessment. Initially hBEC formed a larger vessel network in vitro than hLEC, with interconnected capillaries evident at 2 days. Interconnected lymphatic capillaries were slower (3 days) to assemble. hLEC capillaries demonstrated a significant overall increase in PVV (p = 0.0083) and VD (p = 0.0039) in vitro when co-cultured with hvSMC. A similar increase did not occur for hBEC + hvSMC in vitro, but hBEC + hvSMC in vivo significantly increased PVV (p = 0.0035) and VD (p = 0.0087). Morphology/morphometry established that hLEC vessels maintained distinct cell markers, and demonstrated significantly increased individual vessel and network size, and longer survival than hBEC capillaries in vivo, and established inosculation with rat lymphatics, with evidence of lymphatic function. The porous polyurethane scaffold provided advantages to capillary network formation due to its large (300-600 µm diameter) interconnected pores, and sufficient stability to ensure successful surgical transplantation in vivo. Given their successful survival and function in vivo within the porous scaffold, in vitro assembled hLEC networks using this method are potentially applicable to clinical scenarios requiring replacement of dysfunctional or absent lymphatic networks.

Liver sinusoidal endothelial cells promote the differentiation and survival of mouse vascularised hepatobiliary organoids.

The structural and physiological complexity of currently available liver organoids is limited, thereby reducing their relevance for drug studies, disease modelling, and regenerative therapy. In this study we combined mouse liver progenitor cells (LPCs) with mouse liver sinusoidal endothelial cells (LSECs) to generate hepatobiliary organoids with liver-specific vasculature. Organoids consisting of 5x103 cells were created from either LPCs, or a 1:1 combination of LPC/LSECs. LPC organoids demonstrated mild hepatobiliary differentiation in vitro with minimal morphological change; in contrast LPC/LSEC organoids developed clusters of polygonal hepatocyte-like cells and biliary ducts over a 7 day period. Hepatic (albumin, CPS1, CYP3A11) and biliary (GGT1) genes were significantly upregulated in LPC/LSEC organoids compared to LPC organoids over 7 days, as was albumin secretion. LPC/LSEC organoids also had significantly higher in vitro viability compared to LPC organoids. LPC and LPC/LSEC organoids were transplanted into vascularised chambers created in Fah-/-/Rag2-/-/Il2rg-/- mice (50 LPC organoids, containing 2.5x105 LPCs, and 100 LPC/LSEC organoids, containing 2.5x105 LPCs). At 2 weeks, minimal LPCs survived in chambers with LPC organoids, but robust hepatobiliary ductular tissue was present in LPC/LSEC organoids. Morphometric analysis demonstrated a 115-fold increase in HNF4α+ cells in LPC/LSEC organoid chambers (17.26 ± 4.34 cells/mm2 vs 0.15 ± 0.15 cells/mm2, p = 0.018), and 42-fold increase in Sox9+ cells in LPC/LSEC organoid chambers (28.29 ± 6.05 cells/mm2 vs 0.67 ± 0.67 cells/mm2, p = 0.011). This study presents a novel method to develop vascularised hepatobiliary organoids, with both in vitro and in vivo results confirming that incorporating LSECs with LPCs into organoids significantly increases the differentiation of hepatobiliary tissue within organoids and their survival post-transplantation.

Vascular Pedicle and Microchannels: Simple Methods Toward Effective In Vivo Vascularization of 3D Scaffolds.

Poor vascularization remains a key limiting factor in translating advances in tissue engineering to clinical applications. Vascular pedicles (large arteries and veins) isolated in plastic chambers are known to sprout an extensive capillary network. This study examined the effect vascular pedicles and scaffold architecture have on vascularization and tissue integration of implanted silk scaffolds. Porous silk scaffolds with or without microchannels are manufactured to support implantation of a central vascular pedicle, without a chamber, implanted in the groin of Sprague Dawley rats, and assessed morphologically and morphometrically at 2 and 6 weeks. At both time points, blood vessels, connective tissue, and an inflammatory response infiltrate all scaffold pores externally, and centrally when a vascular pedicle is implanted. At week 2, vascular pedicles significantly increase the degree of scaffold tissue infiltration, and both the pedicle and the scaffold microchannels significantly increase vascular volume and vascular density. Interestingly, microchannels contribute to increased scaffold vascularity without affecting overall tissue infiltration, suggesting a direct effect of biomaterial architecture on vascularization. The inclusion of pedicles and microchannels are simple and effective proangiogenic techniques for engineering thick tissue constructs as both increase the speed of construct vascularization in the early weeks post in vivo implantation.

Selenium nanoparticles as anti-infective implant coatings for trauma orthopedics against methicillin-resistant Staphylococcus aureus and epidermidis: in vitro and in vivo assessment.

Background: Bacterial infection is a common and serious complication in orthopedic implants following traumatic injury, which is often associated with extensive soft tissue damage and contaminated wounds. Multidrug-resistant bacteria have been found in these infected wounds, especially in patients who have multi trauma and prolonged stay in intensive care units.Purpose: The objective of this study was to develop a coating on orthopedic implants that is effective against drug-resistant bacteria. Methods and results: We applied nanoparticles (30-70nm) of the trace element selenium (Se) as a coating through surface-induced nucleation-deposition on titanium implants and investigated the antimicrobial activity against drug resistant bacteria including Methicillin-resistant Staphylococcus aureus (MRSA) and Methicillin-resistant Staphylococcus epidermidis (MRSE) in vitro and in an infected femur model in rats.The nanoparticles were shown in vitro to have antimicrobial activity at concentrations as low as 0.5ppm. The nanoparticle coatings strongly inhibited biofilm formation on the implants and reduced the number of viable bacteria in the surrounding tissue following inoculation of implants with biofilm forming doses of bacteria. Conclusion: This study shows a proof of concept for a selenium nanoparticle coatings as a potential anti-infective barrier for orthopedic medical devices in the setting of contamination with multi-resistant bacteria. It also represents one of the few (if only) in vivo assessment of selenium nanoparticle coatings on reducing antibiotic-resistant orthopedic implant infections.

Bio-engineering a tissue flap utilizing a porous scaffold incorporating a human induced pluripotent stem cell-derived endothelial cell capillary network connected to a vascular pedicle.

Tissue flaps are used to cover large/poorly healing wounds, but involve complex surgery and donor site morbidity. In this study a tissue flap is assembled using the mammalian body as a bioreactor to functionally connect an artery and vein to a human capillary network assembled from induced pluripotent stem cell-derived endothelial cells (hiPSC ECs). In vitro: Porous NovoSorb™ scaffolds (3 mm × 1.35 mm) were seeded with 200,000 hiPSC ECs ±â€¯100,000 human vascular smooth muscle cells (hvSMC), and cultured for 1-3 days, with capillaries formed by 24 h which were CD31+, VE-Cadherin+, EphB4+, VEGFR2+ and Ki67+, whilst hvSMCs (calponin+) attached abluminally. In vivo: In SCID mice, bi-lateral epigastric vascular pedicles were isolated in a silicone chamber for a 3 week 'delay period' for pedicle capillary sprouting, then reopened, and two hiPSC EC ±â€¯hvSMCs seeded scaffolds transplanted over the pedicle. The chamber was either resealed (Group 1), or removed and surrounding tissue secured around the pedicle + scaffolds (Group 2), for 1 or 2 weeks. Human capillaries survived in vivo and were CD31+, VE-Cadherin+ and VEGFR2+. Human vSMCs remained attached, and host mesenchymal cells also attached abluminally. Systemically injected FITC-dextran present in human capillary lumens indicated inosculation to host capillaries. Human iPSC EC capillary morphometric parameters at one week in vivo were equal to or higher than the same parameters measured in human abdominal skin. This 'proof of concept' study has demonstrated that bio-engineering an autologous human tissue flap based on hiPSC EC could minimize the use of donor flaps and has potential applications for complex wound coverage. STATEMENT OF SIGNIFICANCE: Tissue flaps, used for surgical reconstruction of wounds, require complex surgery, often associated with morbidity. Bio-engineering a simpler alternative, we assembled a human induced pluripotent stem cell derived endothelial cell (hiPSC ECs) capillary network in a porous scaffold in vitro, which when transplanted over a mouse vascular pedicle in vivo formed a functional tissue flap with mouse blood flow in the human capillaries. Therefore it is feasible to form an autologous tissue flap derived from a hiPSC EC capillary network assembled in vitro, and functionally connect to a vascular pedicle in vivo that could be utilized in complex wound repair for chronic or acute wounds.

The Vascularised Chamber as an In Vivo Bioreactor.

Vascularisation is key to developing large transplantable tissue constructs capable of providing therapeutic benefits. The vascularised tissue engineering chamber originates from surgical concepts in tissue prefabrication and microsurgery. It serves as an in vivo bioreactor in the form of a closed, protected space surgically created and embedded within the body by fitting a noncollapsible chamber around major blood vessels. This creates a highly angiogenic environment which facilitates the engraftment and survival of transplanted cells and tissue constructs. This article outlines the chamber concept and explores its application in the context of recent advances in biomedical engineering, and how this can play a role in the future of cell therapies and regenerative medicine.

Melatonin promotes survival of nonvascularized fat grafts and enhances the viability and migration of human adipose-derived stem cells via down-regulation of acute inflammatory cytokines.

Nonvascularized fat grafting is a valuable technique for soft tissue reconstruction but poor survival of fat in the host environment remains a problem. A process known as cell-assisted transfer is used to enhance fat graft retention by adding stromal vascular fraction, an adipose-derived stem cell (ASC) rich content to lipoaspirate. We have recently shown that the use of melatonin, a reactive oxygen species scavenger, protects human ASCs from hydrogen peroxide-induced oxidative stress and cell death in vitro but its role as a pharmacological adjunct in clinical fat grafting has not been studied. Herein, the effect of melatonin was examined on human ASCs in vitro using survival and functional assays including the MTT assay, CellTox Green assay, monolayer scratch assay as well as a human cytokine chemoluminescence, and tumour necrosis factor-α assay. Further, the effect of melatonin-treated fat grafts was tested in vivo with a murine model. Haematoxylin and eosin staining, perilipin and CD31 immunostaining were performed with morphometric analysis of adipose tissue. The results demonstrate that, in vitro, the addition of melatonin to ASCs significantly improved their cell-viability, promoted cell migration and preserved membrane integrity as compared to controls. In addition, it induced a potent anti-inflammatory response by downregulating acute inflammatory cytokines particularly tumour necrosis factor-α. For the first time, it is demonstrated in vivo that melatonin enhances fat graft volume retention by reducing inflammation and increasing the percentage of adipose volume within fat grafts with comparable volumes to that of cell-assisted lipotransfer. Based on these novel findings, melatonin may be a useful pharmacological adjunct in clinical fat grafting.

Biocompatible Porous Polyester-Ether Hydrogel Scaffolds with Cross-Linker Mediated Biodegradation and Mechanical Properties for Tissue Augmentation.

Porous polyester-ether hydrogel scaffolds (PEHs) were fabricated using acid chloride/alcohol chemistry and a salt templating approach. The PEHs were produced from readily available and cheap commercial reagents via the reaction of hydroxyl terminated poly(ethylene glycol) (PEG) derivatives with sebacoyl, succinyl, or trimesoyl chloride to afford ester cross-links between the PEG chains. Through variation of the acid chloride cross-linkers used in the synthesis and the incorporation of a hydrophobic modifier (poly(caprolactone) (PCL)), it was possible to tune the degradation rates and mechanical properties of the resulting hydrogels. Several of the hydrogel formulations displayed exceptional mechanical properties, remaining elastic without fracture at compressive strains of up to 80%, whilst still displaying degradation over a period of weeks to months. A subcutaneous rat model was used to study the scaffolds in vivo and revealed that the PEHs were infiltrated with well vascularised tissue within two weeks and had undergone significant degradation in 16 weeks without any signs of toxicity. Histological evaluation for immune responses revealed that the PEHs incite only a minor inflammatory response that is reduced over 16 weeks with no evidence of adverse effects.

Indomethacin Enhances Fat Graft Retention by Up-Regulating Adipogenic Genes and Reducing Inflammation.

BACKGROUND: Cell-assisted lipotransfer has been promisingly applied to restore soft-tissue defects in plastic surgery; however, the harvesting of stromal vascular fraction increases morbidity and poses potential safety hazards. The authors investigated whether adding indomethacin, an antiinflammatory proadipogenic drug, to the fat graft at the time of transplantation would enhance the final graft volume compared with cell-assisted lipotransfer. METHODS: In vitro, human adipose-derived stem cells were cultured in conditioned growth media supplemented with various doses of indomethacin to investigate adipogenesis and the expression of the adipogenic genes. In vivo, lipoaspirate mixed with stromal vascular fractions or indomethacin was injected into the dorsum of mice. Tissues were harvested at weeks 2, 4, and 12 to evaluate histologic changes. RESULTS: In vitro, polymerase chain reaction analysis revealed that increased up-regulation of adipogenic genes and activation of the peroxisome proliferator-activated receptor-γ pathway. In vivo, the percentage volume of adipocytes in the indomethacin-assisted groups was higher than that in the lipoaspirate-alone (control) group at 12 weeks (p = 0.016), and was equivalent to the volume in the cell-assisted groups (p = 1.000). Indomethacin improved adipose volumes but had no effect on vascularity. A larger number of small adipocytes appeared in the treatment samples than in the controls at 2 weeks (p = 0.044) and 4 weeks (p = 0.021). CONCLUSIONS: Pretreating lipoaspirate with indomethacin enhances the final volume retention of engrafted fat. This result is explained in part by increased adipogenesis and possibly by the inhibition of inflammatory responses.

Thiol surface functionalization via continuous phase plasma polymerization of allyl mercaptan, with subsequent maleimide-linked conjugation of collagen.

Thiol groups can undergo a large variety of chemical reactions and are used in solution phase to conjugate many bioactive molecules. Previous research on solid substrates with continuous phase glow discharge polymerization of thiol-containing monomers may have been compromised by oxidation. Thiol surface functionalization via glow discharge polymerization has been reported as requiring pulsing. Herein, continuous phase glow discharge polymerization of allyl mercaptan (2-propene-1-thiol) was used to generate significant densities of thiol groups on a mixed macrodiol polyurethane and tantalum. Three general classes of chemistry are used to conjugate proteins to thiol groups, with maleimide linkers being used most commonly. Here the pH specificity of maleimide reactions was used effectively to conjugate surface-bound thiol groups to amine groups in collagen. XPS demonstrated surface-bound thiol groups without evidence of oxidation, along with the subsequent presence of maleimide and collagen. Glow discharge reactor parameters were optimized by testing the resistance of bound collagen to degradation by 8 M urea. The nature of the chemical bonding of collagen to surface thiol groups was effectively assessed by colorimetric assay (ELISA) of residual collagen after incubation in 8 M urea over 8 days and after incubation with keratinocytes over 15 days. The facile creation of useable solid-supported thiol groups via continuous phase glow discharge polymerization of allyl mercaptan opens a route for attaching a vast array of bioactive molecules. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1940-1948, 2017.

Surface-bound collagen 4 is significantly more stable than collagen 1.

Collagen 1 (C1) is commonly used to improve biological responses to implant surfaces. Here, the stability of C1 was compared with collagen 4 (C4) on a mixed macrodiol polyurethane, both adsorbed and covalently bound via acetaldehyde glow discharge polymerization and reductive amination. Substrate specimens were incubated in solutions of C1 and C4. The strength of conjugation was tested by incubation in 8 M urea followed by enzyme linked immunosorbent assays to measure residual C1 and C4. The basal lamina protein, laminin-332 (L332) was superimposed via adsorption on C4-treated specimens. Keratinocytes were grown on untreated, C1-treated, C4-treated, and C4 + L332-treated specimens, followed by measurement of cell area, proliferation, and focal adhesion density. Adsorbed C4 was shown to be significantly more stable than C1 and covalent conjugation conferred even greater stability, with no degradation of C4 over twenty days in 8 M urea. Cell growth was similar for C1 and C4, with no additional benefit conferred by superimposition of L332. The greater resistance of C4 to degradation may be consequent to cysteine residues and disulphide bonds in its non-collagenous domains. The use of C4 on implants, rather than C1, may improve their long-term stability in tissues. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1364-1373, 2017.

An adipogenic gel for surgical reconstruction of the subcutaneous fat layer in a rat model.

'Off-the-shelf' tissue-engineered skin alternatives for epidermal and dermal skin layers are available; however, no such alternative for the subdermal fat layer exists. Without this well-vascularized layer, skin graft take is variable and grafts may have reduced mobility, contracture and contour defects. In this study a novel adipose-derived acellular matrix (Adipogel) was investigated for its properties to generate subdermal fat in a rat model. In a dorsal thoracic site, a 1 × 1 cm Adipogel implant was inserted within a subdermal fat layer defect. In a dorsal lumbar site, an Adipogel implant was inserted in a subfascial pocket. Contralateral control defects remained empty. At 8 weeks wound/implant sites were evaluated histologically, immunohistochemically and morphometrically. Identifiable thoracic Adipogel implants lost volume in vivo over 8 weeks. Neovascularization and adipogenesis were evident within implants and adipocyte percentage volume was 33.07 ± 6.55% (mean ± SEM). A comparison of entire cross-sections of thoracic wounds demonstrated a significant increase in total wound fat in Adipogel-implanted wounds (37.19 ± 4.48%, mean ± SEM) compared to control (16.53 ± 4.60%; p = 0.0092), indicating that some Adipogel had been completely converted to normal fat. At the lumbar site, Adipogel also lost volume, appearing flattened, although fat generation and angiogenesis occurred. At both sites macrophage infiltration was mild, whilst many infiltrating cells were PDGFRß-positive mesenchymal cells. Adipogel is adipogenic and angiogenic and is a promising candidate for subcutaneous fat regeneration; it has the potential to be a valuable adjunct to wound-healing therapy and reconstructive surgery practice. Copyright © 2015 John Wiley & Sons, Ltd.

Toward a skin-material interface with vacuum-integrated capped macroporous scaffolds.

Avulsion, epidermal marsupialization, and infection cause failure at the skin-material interface. A robust interface would permit implantable robotics, prosthetics, and other medical devices; reconstruction of surgical defects, and long-term access to blood vessels and body cavities. Torus-shaped cap-scaffold structures were designed to work in conjunction with negative pressure to address the three causes of failure. Six wounds were made on the backs of each of four 3-month old pigs. Four unmodified (no caps) scaffolds were implanted along with 20 cap-scaffolds. Collagen type 4 was attached to 21 implants. Negative pressure then was applied. Structures were explanted and assessed histologically at day 7 and day 28. At day 28, there was close tissue apposition to scaffolds, without detectable reactions from defensive or interfering cells. Three cap-scaffolds explanted at day 28 showed likely attachment of epidermis to the cap or cap-scaffold junction, without deeper marsupialization. The combination of toric-shaped cap-scaffolds with negative pressure appears to be an intrinsically biocompatible system, enabling a robust skin-material interface. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1307-1318, 2017.

A Streamlined Method for the Preparation of Growth Factor-enriched Thermosensitive Hydrogels from Soft Tissue.

Hydrogels are an ideal medium for the expansion of cells in three dimensions. The ability to induce cell expansion and differentiation in a controlled manner is a key goal in tissue engineering. Here we describe a detailed method for producing hydrogels from soft tissues with an emphasis on adipose tissue. In this method, soluble, extractable proteins are recovered from the tissue and stored while the remaining insoluble tissue is processed and solubilised. Once the tissue has been sufficiently solubilised, the extracted proteins are added. The resulting product is a thermosensitive hydrogel with proteins representative of the native tissue. This method addresses common issues encountered when working with some biomaterials, such as high lipid content, DNA contamination, and finding an appropriate sterilisation method. Although the focus of this article is on adipose tissue, using this method we have produced hydrogels from other soft tissues including muscle, liver, and cardiac tissue.

Intratissular expansion-mediated, serial fat grafting: A step-by-step working algorithm to achieve 3D biological harmony in autologous breast reconstruction.

BACKGROUND: Breast reconstruction involves the use of autologous tissues or implants. Occasionally, microsurgical reconstruction is not an option because of insufficient donor tissues. Fat grafting has become increasingly popular in breast surgery. The challenge with this technique is how to reconstruct a stable and living "scaffold" that resembles a breast. METHODS: Breast reconstruction (n = 7) was performed using intratissular expansion with serial deflation-lipofilling sessions. Mean age of the patients was 41 years (22-53). The expander generated a vascularized capsule at 8 weeks, which demarcated a recipient site between the skin and the capsule itself, and functioned as a vascular source for angiogenesis. Serial sessions of deflation and lipofilling were initiated at 8 weeks with removal of the expander at the completion of the treatment. An average of 644 ml (range, 415 ml-950 ml) of lipoaspirate material was injected to reconstruct the breast mound. An average of 4 (range, 3 to 5) fat-grafting sessions with a 3-month interval was needed to achieve symmetry with the contralateral breast. The average follow-up was 14 months (range, 9-29 months). MRI examination was performed at 8 months to analyze tissue survival and the residual volume. RESULTS: MRI examination retained tissue survival and the mean reconstructed breast volume was 386 ml (range, 231 ml-557 ml). An aesthetically pleasant breast mound was created, with a high satisfaction rate. CONCLUSION: We could reconstruct an aesthetically pleasant and stable breast mound in a selected group of patients by using intratissular expansion and fat grafting.

Tissue Engineering by Intrinsic Vascularization in an In Vivo Tissue Engineering Chamber.

In reconstructive surgery, there is a clinical need for an alternative to the current methods of autologous reconstruction which are complex, costly and trade one defect for another. Tissue engineering holds the promise to address this increasing demand. However, most tissue engineering strategies fail to generate stable and functional tissue substitutes because of poor vascularization. This paper focuses on an in vivo tissue engineering chamber model of intrinsic vascularization where a perfused artery and a vein either as an arteriovenous loop or a flow-through pedicle configuration is directed inside a protected hollow chamber. In this chamber-based system angiogenic sprouting occurs from the arteriovenous vessels and this system attracts ischemic and inflammatory driven endogenous cell migration which gradually fills the chamber space with fibro-vascular tissue. Exogenous cell/matrix implantation at the time of chamber construction enhances cell survival and determines specificity of the engineered tissues which develop. Our studies have shown that this chamber model can successfully generate different tissues such as fat, cardiac muscle, liver and others. However, modifications and refinements are required to ensure target tissue formation is consistent and reproducible. This article describes a standardized protocol for the fabrication of two different vascularized tissue engineering chamber models in vivo.

Melatonin Protects Human Adipose-Derived Stem Cells from Oxidative Stress and Cell Death.

BACKGROUND: Adipose-derived stem cells (ASCs) have applications in regenerative medicine based on their therapeutic potential to repair and regenerate diseased and damaged tissue. They are commonly subject to oxidative stress during harvest and transplantation, which has detrimental effects on their subsequent viability. By functioning as an antioxidant against free radicals, melatonin may exert cytoprotective effects on ASCs. METHODS: We cultured human ASCs in the presence of varying dosages of hydrogen peroxide and/or melatonin for a period of 3 hours. Cell viability and apoptosis were determined with propidium iodide and Hoechst 33342 staining under fluorescence microscopy. RESULTS: Hydrogen peroxide (1-2.5 mM) treatment resulted in an incremental increase in cell death. 2 mM hydrogen peroxide was thereafter selected as the dose for co-treatment with melatonin. Melatonin alone had no adverse effects on ASCs. Co-treatment of ASCs with melatonin in the presence of hydrogen peroxide protected ASCs from cell death in a dose-dependent manner, and afforded maximal protection at 100 µM (n=4, one-way analysis of variance P<0.001). Melatonin co-treated ASCs displayed significantly fewer apoptotic cells, as demonstrated by condensed and fragmented nuclei under fluorescence microscopy. CONCLUSIONS: Melatonin possesses cytoprotective properties against oxidative stress in human ASCs and might be a useful adjunct in fat grafting and cell-assisted lipotransfer.