Reciprocal association between social support and psychological distress in chronic physical health conditions: A random intercept cross-lagged panel model.

The onset of a chronic physical health condition (CHC) can highly impact individuals' well-being and mental health. Social support has been shown to help people rebound after the onset of a CHC. Nonetheless, little is known about the longitudinal pattern of social support and its reciprocal association with mental health in CHC. This study aimed to illustrate the longitudinal pattern of perceived social support and to examine the reciprocal association between perceived social support and psychological distress across 6 years. Two random intercept cross-lagged panel models were conducted, one for emotional and one for practical support, using yearly assessments of 582 Swiss Household Panel's participants reporting a CHC. A reciprocal association was found, with psychological distress 1 year after the onset being linked to less emotional support in the following year and vice versa, more emotional support being linked to less psychological distress the following year. A unidirectional association was found for practical support, with more psychological distress 1 year before the CHC onset being linked to more practical support at the onset year. This study underlines the importance of involving the social environment of individuals living with a CHC, especially around the first year after the onset.

Innovative Bioplasticizers from Residual Cynara cardunculus L. Biomass-Derived Levulinic Acid and Their Environmental Impact Assessment by LCA Methodology.

This work is focused on the application of Life Cycle Assessment (LCA) methodology for the quantification of the potential environmental impacts associated with the obtainment of levulinic acid from residual Cynara cardunculus L. biomass and its subsequent valorization in innovative bioplasticizers for tuning the properties as well as the processability of biopolymers. This potentially allows the production of fully biobased and biodegradable bioplastic formulations, thus addressing the issues related to the fossil origin and nonbiodegradability of conventional additives, such as phthalates. Steam explosion pretreatment was applied to the epigean residue of C. cardunculus L. followed by a microwave-assisted acid-catalyzed hydrolysis. After purification, the as-obtained levulinic acid was used to synthesize different ketal-diester derivatives through a three-step selective synthesis. The levulinic acid-base additives demonstrated remarkable plasticizing efficiency when added to biobased plastics. The LCA results were used in conjunction with those from the experimental activities to find the optimal compromise between environmental impacts and mechanical and thermal properties, induced by the bioadditives in poly(3-hydroxybutyrate), PHB biopolymer.

Further Step in the Transition from Conventional Plasticizers to Versatile Bioplasticizers Obtained by the Valorization of Levulinic Acid and Glycerol.

In the last two decades, the use of phthalates has been restricted worldwide due to their well-known toxicity. Nonetheless, phthalates are still widely used for their versatility, high plasticization effect, low cost, and lack of valuable alternatives. This study presents the fully bio-based and versatile glycerol trilevulinate plasticizer (GT) that was obtained by the valorization of glycerol and levulinic acid. The mild-conditions and solvent-free esterification used to synthesize GT was optimized by investigating the product by Fourier transform infrared and NMR spectroscopy. An increasing content of GT, from 10 to 40 parts by weight per hundred parts of resin (phr), was tested with poly(vinyl chloride), poly(3-hydroxybutyrate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(lactic acid), and poly(caprolactone), which typically present complicated processability and/or mechanical properties. GT produced a significant plasticization effect on both amorphous and semicrystalline polymers, reducing their glass-transition temperature and stiffness, as observed by differential scanning calorimetry measurements and tensile tests. Remarkably, GT also decreased both the melting temperature and crystallinity degree of semicrystalline polymers. Furthermore, GT underwent enzyme-mediated hydrolysis to its initial constituents, envisioning a promising prospective for environmental safety and upcycling. Furthermore, 50% inhibitory concentration (IC50) tests, using mouse embryo fibroblasts, proved that GT is an unharmful alternative plasticizer, which makes it potentially applicable in the biomedical field.

Fully Biobased Polyhydroxyalkanoate/Tannin Films as Multifunctional Materials for Smart Food Packaging Applications.

Fully biobased and biodegradable materials have attracted a growing interest in the food packaging sector as they can help to reduce the negative impact of fossil-based plastics on the environment. Moreover, the addition of functionalities to these materials by introducing active molecules has become an essential requirement to create modern packaging able to extend food's shelf-life while informing the consumer about food quality and freshness. In this study, we present an innovative bioplastic formulation for food packaging based on poly(hydroxybutyrate-co-valerate) (PHBV) and tannins as multifunctional additives. As a proof of concept, PHBV/tannin films were prepared by solvent casting, increasing the tannin content from 1 to 10 per hundred of resin (phr). Formic acid was used to reach a homogeneous distribution of the hydrophilic tannins into hydrophobic PHBV, which is remarkably challenging by using other solvents. Thanks to their well-known properties, the effect of tannins on the antioxidant, UV protection, and gas barrier properties of PHBV was evaluated. Samples containing 5 phr bioadditive revealed the best combination of these properties, also maintaining good transparency. Differential scanning calorimetry (DSC) investigations revealed that films are suitable for application from the fridge to potentially high temperatures for food heating (up to 200 °C). Tensile tests have also shown that Young's modulus (900-1030 MPa) and tensile strength (20 MPa) are comparable with those of the common polymers and biopolymers for packaging. Besides the improvement of the PHBV properties for extending food's shelf-life, it was also observed that PHBV/tannin could colorimetrically detect ammonia vapors, thus making this material potentially applicable as a smart indicator for food spoilage (e.g., detection of fish degradation). The presented outcomes suggest that tannins can add multifunctional properties to a polymeric material, opening up a new strategy to obtain an attractive alternative to petroleum-based plastics for smart food packaging applications.

Fine Tuning of the Mechanical Properties of Bio-Based PHB/Nanofibrillated Cellulose Biocomposites to Prevent Implant Failure Due to the Bone/Implant Stress Shielding Effect.

A significant mechanical properties mismatch between natural bone and the material forming the orthopedic implant device can lead to its failure due to the inhomogeneous loads distribution, resulting in less dense and more fragile bone tissue (known as the stress shielding effect). The addition of nanofibrillated cellulose (NFC) to biocompatible and bioresorbable poly(3-hydroxybutyrate) (PHB) is proposed in order to tailor the PHB mechanical properties to different bone types. Specifically, the proposed approach offers an effective strategy to develop a supporting material, suitable for bone tissue regeneration, where stiffness, mechanical strength, hardness, and impact resistance can be tuned. The desired homogeneous blend formation and fine-tuning of PHB mechanical properties have been achieved thanks to the specific design and synthesis of a PHB/PEG diblock copolymer that is able to compatibilize the two compounds. Moreover, the typical high hydrophobicity of PHB is significantly reduced when NFC is added in presence of the developed diblock copolymer, thus creating a potential cue for supporting bone tissue growth. Hence, the presented outcomes contribute to the medical community development by translating the research results into clinical practice for designing bio-based materials for prosthetic devices.

The LIVES Daily Hassles Scale and Its Relation to Life Satisfaction.

Although daily hassles have been of interest since the 1980s, only a few tools have been developed to assess them. Most of them are checklists or open-ended questions that are demanding for participants in panel surveys. Therefore, to facilitate daily hassles integration into large surveys, the aim of this study was to present a new tool assessing daily hassles, the LIVES-Daily Hassles Scale (LIVES-DHS), and to examine its relation to life satisfaction, in a sample of 1,170 French- and German-speaking adults living in Switzerland. In a first random subsample, we conducted a principal axis factor analysis, and the results suggested a five-factor solution. Furthermore, we conducted a confirmatory factor analysis on a second random subsample, and it supported the hierarchical factor structure of the scale. The LIVES-DHS consists of 18 items represented by five factors that describe five sources of daily hassles: financial, physical, relational, environmental, and professional. The bivariate correlations showed that the LIVES-DHS could differentiate the concept of daily hassles from associated concepts. Finally, the hierarchical regression showed that daily hassles negatively predicted life satisfaction and added a significant incremental variance beyond that accounted for by age, gender, household income, education level, and personality traits.

Aqueous-Based Synthesis of Photocatalytic Copper Sulfide Using Sulfur Waste as Sulfurizing Agent.

Most of the copper sulfide synthetic approaches developed until now are still facing issues in their procedure, such as long synthesis duration, high energetic consumption, and high implementation costs. This publication reports a facile and sustainable approach for synthesizing copper sulfides on a large scale. In particular, an industrial by-product of sulfur waste was used as a sulfurizing agent for copper sulfide synthesis in a water medium. The reaction was performed in the hydrothermal environment by following a novel proposed mechanism of copper sulfide formation. The investigation of morphological and optical properties revealed that the target products obtained by using waste possess the resembling properties as the ones synthesized from the most conventional sulfurizing agent. Since the determined band gap of synthesis products varied from 1.72 to 1.81 eV, the photocatalytic properties, triggered under visible light irradiation, were also investigated by degrading the methylene blue as a model pollutant. Importantly, the degradation efficiency of the copper sulfide synthesized from sulfur waste was equivalent to a sample obtained from a reference sulfurizing agent since the value for both samples was 96% in 180 min. This very simple synthetic approach opens up a new way for large-scale sustainable production of visible-light-driven photocatalysts for water purification from organic pollutants.

A systematic literature review of how and whether social media data can complement traditional survey data to study public opinion.

In this article, we review existing research on the complementarity of social media data and survey data for the study of public opinion. We start by situating our review in the extensive literature (N = 187) about the uses, challenges, and frameworks related to the use of social media for studying public opinion. Based on 187 relevant articles (141 empirical and 46 theoretical) - we identify within the 141 empircal ones six main research approaches concerning the complementarity of both data sources. Results show that the biggest share of the research has focused on how social media can be used to confirm survey findings, especially for election predictions. The main contribution of our review is to detail and classify other growing complementarity approaches, such as comparing both data sources on a given phenomenon, using survey measures as a proxy in social media research, enriching surveys with SMD, recruiting individuals on social media to conduct a second survey phase, and generating new insight on "old" or "under-investigated" topics or theories using SMD. We discuss the advantages and disadvantages associated with each of these approaches in relation to four main research purposes, namely the improvement of validity, sustainability, reliability, and interpretability. We conclude by discussing some limitations of our study and highlighting future paths for research.

Longitudinal changes in psychological adaptation outcomes during spinal cord injury inpatient rehabilitation.

OBJECTIVES: To determine average changes and individuals' patterns of change in depressive symptoms, anxiety symptoms, general distress, and life satisfaction between admission to spinal cord injury inpatient rehabilitation and discharge; and to identify factors associated with change. METHOD: Longitudinal data collection as part of a national cohort study (N = 281). Changes in the psychological adaptation outcomes were analyzed using latent change score models. Reliable change indexes were calculated for each outcome to identify individuals' patterns of change. Biopsychosocial factors were examined as covariates of change. RESULTS: On average, depressive symptoms, anxiety symptoms, and general distress decreased between admission and discharge, while life satisfaction increased. According to the reliable change indexes, several adaptation patterns were identified. The proportion of individuals following each pattern varied depending on the analyzed outcome: resilience (absence of clinically relevant symptoms at admission and discharge) was the most common for symptoms of depression (61.57%) and anxiety (66.55%), whereas vulnerability (clinically relevant symptoms at both measurement times) was the most common for distress (57.32%). Improvement patterns (statistically significant decreases) were identified for 6.41%, 4.27%, and 7.83% of participants in depressive symptoms, anxiety symptoms and distress, respectively. For life satisfaction, improvement (statistically significant increases) was found for 8.54%. Male sex, tetraplegia, self-efficacy, optimism, and social support were associated with average changes in the psychological adaptation outcomes. CONCLUSIONS: On average, participants showed improvement in all analyzed outcomes. Still, there is substantial variability in change. Self-efficacy, social support, and optimism are potential intervention targets during inpatient rehabilitation to promote a favorable psychological adaptation process. (PsycInfo Database Record (c) 2021 APA, all rights reserved).

Zinc Polyaleuritate Ionomer Coatings as a Sustainable, Alternative Technology for Bisphenol A-Free Metal Packaging.

Sustainable coatings for metal food packaging were prepared from ZnO nanoparticles (obtained by the thermal decomposition of zinc acetate) and a naturally occurring polyhydroxylated fatty acid named aleuritic (or 9,10,16-trihydroxyhexadecanoic) acid. Both components reacted, originating under specific conditions zinc polyaleuritate ionomers. The polymerization of aleuritic acid into polyaleuritate by a solvent-free, melt polycondensation reaction was investigated at different times (15, 30, 45, and 60 min), temperatures (140, 160, 180, and 200 °C), and proportions of zinc oxide and aleuritic acid (0:100, 5:95, 10:90, and 50:50, w/w). Kinetic rate constants calculated by infrared spectroscopy decreased with the amount of Zn due to the consumption of reactive carboxyl groups, while the activation energy of the polymerization decreased as a consequence of the catalyst effect of the metal. The adhesion and hardness of coatings were determined from scratch tests, obtaining values similar to robust polymers with high adherence. Water contact angles were typical of hydrophobic materials with values ≥94°. Both mechanical properties and wettability were better than those of bisphenol A (BPA)-based resins and most likely are related to the low migration values determined using a hydrophilic food simulant. The presence of zinc provided a certain degree of antibacterial properties. The performance of the coatings against corrosion was studied by electrochemical impedance spectroscopy at different immersion times in an aqueous solution of NaCl. Considering the features of these biobased lacquers, they can be potential materials for bisphenol A-free metal packaging.

Adaptation during spinal cord injury rehabilitation: The role of appraisal and coping.

OBJECTIVE: To test the spinal cord injury adjustment model (SCIAM) by examining whether primary appraisals (threat or loss) and coping strategies (approach-oriented and denial) sequentially mediate the impact of functional independence, psychological resources, and social support on depressive and anxiety symptoms among individuals with spinal cord injury during inpatient rehabilitation. METHOD: Path analyses of longitudinal data from a Swiss inception cohort study (N = 207). Models were implemented separately for depressive and anxiety symptoms. RESULTS: The initial models based on the SCIAM yielded poor fit and were respecified. Different from the SCIAM's assumptions, psychological resources and threat appraisal showed direct effects on depressive symptoms (ß = -.28, SE = .07, p < .001 and ß = .33, SE = .07, p < .001, respectively), while social support and threat appraisal showed direct effects on anxiety symptoms (ß = -.23, SE = .06, p < .001 and ß = .42, SE = .06, p < .001, respectively). Primary appraisals and coping strategies partially mediated the effects of psychological resources on depressive symptoms and fully mediated their effect on anxiety symptoms. However, this did not only happen via the SCIAM's sequential double mediation, since indirect effects were also observed via threat appraisal only. The final models explained 40 and 30% of the variance of depressive and anxiety symptoms, respectively. CONCLUSIONS: The findings only partially supported the SCIAM's sequential double mediation mechanism. Psychological resources, social support, and primary appraisals can have direct effects on psychological adaptation outcomes and may be suitable intervention targets during inpatient rehabilitation. (PsycInfo Database Record (c) 2021 APA, all rights reserved).

The longitudinal impact of a chronic physical health condition on subjective well-being.

OBJECTIVE: Chronic health conditions (CHC) can have severe impacts on an individual's life, affecting well-being and mental health. Nonetheless, individuals can show different response patterns of psychological adaptation following a CHC onset. This study aimed to identify profiles of subjective well-being (SWB) at 1 year before (T - 1), 1 year after (T + 1), and 4 years after (T + 4) the onset of a physical CHC using seven indicators (health satisfaction, life satisfaction, energy, joy, worry, sadness, anger), examine transitions between the identified profiles, and determine predicting factors of these transitions. METHOD: Latent profile analysis and latent transition analysis was conducted using a sample of 357 participants reporting a physical CHC drawn from the Swiss Household Panel dataset. RESULTS: Three profiles were identified at T - 1: low, high, and very high SWB. At T + 1 and T + 4, a fourth vulnerable profile emerged. Transition analysis showed that, overall, the most probable transition was to stay in similar profiles across time. However, recovery toward higher SWB profiles and delayed reaction toward lower SWB profiles appeared between 1 and 4 years following the CHC onset. Factors predicting recovery patterns from low to high SWB are better health status, fewer negative life events, and financial scarcity, whereas lower emotional stability was related to a delayed reaction from high to low SWB. CONCLUSION: This study underlines the importance of personal factors in the adaptation following CHC onset. Routine assessment of personality traits would enable identifying individuals at greater risk of lower SWB following the onset of a CHC. (PsycInfo Database Record (c) 2021 APA, all rights reserved).

Carbon Nanotubes/Regenerated Silk Composite as a Three-Dimensional Printable Bio-Adhesive Ink with Self-Powering Properties.

In this study, regenerated silk (RS) obtained from Bombyx Mori cocoons is compounded with carboxyl-functionalized carbon nanotubes (f-CNTs) in an aqueous environment for the fabrication of functional bio-adhesives. Molecular interactions between RS and carboxyl groups of CNTs result in structural increase of the ß-sheet formation, obtaining a resistant adhesive suitable for a wet biological substrate. Moreover, the functionalization of CNTs promotes their dispersion in RS, thus enabling the production of films with controlled electrical conductivity. The practical utility of such a property is demonstrated through the fabrication of a piezoelectric device implanted in a rat to monitor the breathing in vivo and to be used as a self-powered system. Finally, RS/f-CNTs were used as a printable biomaterial ink to three dimensionally print bilayer hollow tubular structures composed of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and RS. Initial tests carried out by seeding and growing human skin fibroblasts demonstrated that the 3D printed bilayer hollow cylindrical structures offer a suitable surface for the seeded cells to attach and proliferate. In general, the herein proposed RS/f-CNT composite serves as a versatile material for solvent-free dispersion processing and 3D printing, thus paving a new approach to prepare multifunctional materials with potential applications of great interest in sealing biological substrates and implantable devices for regenerative medicine.

The role of biotechnology in the transition from plastics to bioplastics: an opportunity to reconnect global growth with sustainability.

Building new value chains, through the valorization of biomass components for the development of innovative bio-based products (BBPs) aimed at specific market sectors, will accelerate the transition from traditional production technologies to the concept of biorefineries. Recent studies aimed at mapping the most relevant innovations undergoing in the field of BBPs (Fabbri et al. 2019, Final Report of the Task 3 BIOSPRI Tender Study on Support to R&I Policy in the Area of Bio-based Products and Services, delivered to the European Commission (DG RTD)), clearly showed the dominant position played by the plastics sector, in which new materials and innovative technical solutions based on renewable resources, concretely contribute to the achievement of relevant global sustainability goals. New sustainable solutions for the plastic sector, either bio-based or bio-based and biodegradable, have been intensely investigated in recent years. The global bioplastics and biopolymers market size is expected to grow from USD 10.5 billion in 2020 to USD 27.9 billion by 2025 (Markets and Markets, 2020, Bioplastics & Biopolymers Market by Type (Non-Biodegradable/Bio-Based, Biodegradable), End-Use Industry (Packaging, Consumer Goods, Automotive & Transportation, Textiles, Agriculture & Horticulture), Region - Global Forecast to 2025), and this high growth is driven primarily by the growth of the global packaging end-use industry. Such relevant opportunities are the outcomes of intensive scientific and technological research devoted to the development of new materials with selected technical features, which can represent feasible substitutes for the fossil-based plastic materials currently used in the packaging sectors and other main fields. This article offers a map of the latest developments connected to the plastic sector, achieved through the application of biotechnological routes for the preparation of completely new polymeric structures, or drop-in substitutes derived from renewable resources, and it describes the specific role played by biotechnology in promoting and making this transition faster.

Consistency of data collected through online life history calendars.

The collection of longitudinal data is crucial in some domains such as life course studies. However, prospective studies are considerably costly, and thus retrospective data are an appealing alternative. A life history calendar is a tool specifically conceived to collect retrospective data. However, although it is designed to enhance the recall process of the respondents, the accuracy of the data collected through this approach remains unknown, particularly when data is collected online. In this study, we conducted a secondary analysis of data collected from n = 5,181 respondents through an online survey regarding their sexual health. Because we inquired about the occurrence of certain events twice during the survey, once using a life calendar and once through a traditional questionnaire, we were able to perform three types of consistency checks: (1) reporting of single events, (2) age when the events occurred and (3) correct timing between two events. The main results indicated that it is generally more difficult to remember the exact age of occurrence of an event than the event itself, that the report of related events is generally coherent, and that women are generally more accurate in their answers than men. Based on our results, it is therefore possible to identify a subset of persons whose answers are more consistent throughout the survey. This study also shows that data obtained through an online life history calendar can be of a quality similar to that obtained through a traditional online questionnaire.

Non-consensual sexting: characteristics and motives of youths who share received-intimate content without consent.

Background:One of the possible negative consequences of sexting is the non-consensual sharing of received-intimate content. This study aimed to determine the characteristics and motives of youths who shared received-intimate images without consent. Methods: Data were obtained from a self-administrated Swiss survey on sexual behaviours among young adults (aged 24-26 years). Out of the 7142 participants, 5175 responded to the question 'Have you ever shared (forwarding or showing) a sexy photograph/video of someone else (known or unknown) without consent'?; 85% had never shared (Never), 6% had shared once (Once) and 9% had shared several times (Several). Data are presented as relative risk ratios with 95% confidence intervals. Results: Participants who had shared received-intimate content without consent had higher odds of being male [2.73 (2.14-3.47)], foreign-born [1.45 (1.04-2.03)], reporting a non-heterosexual orientation [1.46 (1.10-1.93)], having sent one's own intimate image [1.76 (1.32-2.34)] and receiving a shared-intimate image of someone unknown [4.56 (3.28-6.36)] or known [2.76 (1.52-5.01)] compared with participants who had never shared. The main reported motivations were for fun (62%), showing off (30%) and failure to realise what they were doing (9%). Conclusions: Given the reported motivations, it appears crucial to remind youths of the seriousness of non-consensual sharing. Although females may also be perpetrators, the behaviour was more prevalent among males. Prevention and education need to consider a broad range of young people in their scenarios. Even if a particular focus on understanding and preventing males' perpetration must be considered, overall perpetration, including female's, must be discussed.

Does regretting first vaginal intercourse have an effect on young adults' sexual behaviour?

Background The aims of this research were to determine personal differences depending on the reason for regretting or not first vaginal intercourse and its effects on sexual behaviour later on among young adults, and to assess the association between reasons for engaging in first vaginal intercourse and regretting it. METHODS: Data were drawn from the 2017 Swiss national survey on youth sexual behaviours among young adults (mean age 26 years) living in Switzerland. Out of the 7142 participants, 4793 (51% females) answered the question 'Looking back now to the first time you had vaginal intercourse, do you think that…' with five possible answers: (1) I should not have done it (6.7%); (2) I should have waited longer (7.7%); (3) I should have done it earlier (7.4%); (4) It was about the right time (67.9%); and (5) I don't know (10.3%). The five groups were compared on sociodemographic and sex behaviour-related variables, analysed separately by gender. RESULTS: One-third of participants regretted their first experience. In the multivariate analysis, compared with the 'right time' group, all other groups were more likely to find their first experience unpleasant and to have done it with a casual partner. Those in the 'I should not have done it' and 'I should have waited longer' groups were also more likely to have done it because of external pressure, especially among females. CONCLUSIONS: The study results underline the significance to choose the right time and the right partner for first vaginal intercourse and the importance of including partner respect and avoiding external pressure as part of sexual education.

Two-Step Solvent-Free Synthesis of Poly(hydroxybutyrate)-Based Photocurable Resin with Potential Application in Stereolithography.

A bio-based polymeric ink for stereolithography developed through a two-step solvent-free process is herein proposed. Specifically, low-molecular-weight poly(hydroxybutyrate) (PHB)-diol oligomers are prepared via molten transesterification of bacterial PHB with 1,4-butanediol. Transesterification conditions such as diol concentration, catalyst amount, and reaction time are studied for optimizing the final oligomers' molecular weight and structural features. In the second step, the oligomeric hydroxyl terminals are converted into methacrylate moieties through a solvent-free end-capping reaction and diluted in propylene carbonate in order to obtain a photo-polymerizable ink with suitable viscosity. The ink is UV-cured, and the obtained material properties are investigated by FT-IR and differential scanning calorimetry measurements. The proposed method provides a valuable and environmentally friendly alternative to currently available synthetic routes, overcoming their typical disadvantages related to the used solvents and harsh conditions. Moreover, it opens up a sustainable route for converting polyesters into functionalized oligomeric derivatives, which can potentially find application in 3D printing of customized biomedical devices.

Does the Primary Resource of Sex Education Matter? A Swiss National Study.

Sex education (SE) remains a subject of debate, including controversies on resources. The purpose of this paper was to determine the main SE resource during adolescence and its associations with personal characteristics and sexual behaviors of youths. Data were obtained from a self-administrated Swiss national survey on sexuality among young adults (mean age 26.3). Participants (N = 4978) were divided into six groups according to their main SE resource during their adolescence: Friends (1939; 38.9%), Parents (1361; 27.3%), School (n = 949; 19.1%), The Internet (399; 8.0%), Nobody (172; 3.5%) and Other (157; 3.2%). Groups were compared on sociodemographic, first sexual experiences, pregnancy, risky sexual behaviors, and undesired sexual experiences data. Males and non-heterosexual participants were overrepresented in the Internet group while, females more often reported their parents as their main SE resource. Participants in the School group reported the lowest rates of sexually transmitted infections and Friends the highest. Compared to the School group, those in the Friends, Internet, Nobody, and Other groups were more likely to report undesired sexual experiences. Few differences appeared between parents and school. Even though some resources such as friends or the Internet presented negative outcomes when they were assessed individually, we cannot deny the important place that they occupy in the lives of some youths.

Trajectories of resilience among widows: a latent transition model.

OBJECTIVES: In 2015 we identified three profiles of adaptation following spousal bereavement: Vulnerables; Copers and Resilients (Spahni, Morselli, Perrig-Chiello, & Bennett, 2015). However, adaptation to spousal bereavement is a dynamic process. Thus, we examine the trajectories of the same participants longitudinally over two years. We identify the stability and change in profiles of adaptation to widowhood; probability of stability and change; factors that influence trajectories in profile membership. METHODS: Data stem from a longitudinal questionnaire study of 309 older widowed people. The questionnaire included five measures of well-being, serving as the dependent variables of this analysis, and measures of personal resources and contextual factors, including social support, marital happiness, psychological resilience, and demography. Data was analysed using latent transition analysis of the variables loneliness, hopelessness, depressive symptoms, life satisfaction, and subjective health. RESULTS: The analysis replicated the three Wave 1 profiles as the best theoretical fit: Vulnerables; Copers; and Resilients. Stability was most common, but some participants moved to more or less adaptive profiles, the former being more frequent. Younger age, longer time since widowhood, new life perspectives facilitated adaptation. Those transitioning to less adaptive profiles were more likely to be women and older. DISCUSSION: The path to adaptation was not linear. Many of the explanatory variables contributed both to positive and negative adaptation. These include previous caring experience, education, psychological resilience and personal strength. This suggests these explanatory variables do not act in isolation but are likely to interact with each other, and with other, yet not measured, factors.