ABSTRACT
The present work describes the development of a fast and robust sequential injection fluorimetric procedure for the determination of Sn in juices of canned fruits. The developed automatic methodology is based on the complexation of Sn with 8-hydroxyquinoline-5-sulfonic acid (HQSA) to form a fluorimetric product (lambda(exc)=354 nm; lambda(em)=510 nm). The influence of dimethylsulfoxide (DMSO) and cetylpyridinium bromide (CPB) on the sensitivity of the fluorimetric determination was evaluated. Linear calibration plots were obtained for Sn concentrations between 1 and 10 mg L(-1), with a detection limit of 0.38 mg L(-1). In each analytical cycle 0.006 mg of HQSA and 0.47 mg of CPB were consumed and 1.5 mL of effluent was generated. The developed methodology was applied to the determination of Sn in juices of canned fruits and the results complied with those furnished by an electrothermal atomic absorption spectrometry comparison procedure, with relative deviations lower than 5.2%. The automatic procedure exhibited good precision (R.S.D.<1.4%) and the sampling rate was about 70 determinations per hour.
Subject(s)
Flow Injection Analysis/methods , Fluorometry/methods , Food Analysis/methods , Food Contamination/analysis , Food Preservation , Fruit/chemistry , Tin/analysis , Cetylpyridinium/chemistry , Dimethyl Sulfoxide/chemistry , Indicators and Reagents/chemistry , Oxyquinoline/analogs & derivatives , Oxyquinoline/chemistry , Time Factors , Tin/chemistryABSTRACT
The concentrations of major (Ca, K, Mg, Na and P) and trace elements (Al, Cu and Fe) in soy protein formulations sold in Bahia (Brazil) were determined by inductively coupled plasma-optical emission spectrometry (ICP-OES). Liquid and powdered soy protein formulation samples, both whole and light, were digested using a conventional heating program on a hot-plate. The powdered samples were prepared according to the label instructions for human consumption. A 5.0-ml aliquot of the soy protein emulsion was transferred to a borosilicate Erlenmeyer and concentrated nitric and sulfuric acid added. After a digestion time of approximately 50 min, hydrogen peroxide was added and heating continued to give a final volume of approximately 5 ml; the colorless digests were then made up to 15.0 ml with deionised water. Residual acid content was determined by acid-base titration. Good agreement between measured and certified values for all analytes in a non-fat milk powder (NIST SRM 1549) indicated that the method was suitable for major and trace elements determination in soy protein formulations.
