Biphasic Palladium-Catalyzed Hydroesterification in a Polyol Phase: Selective Synthesis of Derived Monoesters.

The palladium-catalyzed hydroesterification reaction was performed with polyols and olefins in a liquid/liquid biphasic system composed of unreacted polyol on the one hand and apolar reaction products/organic solvents on the other hand. The palladium-based catalyst was immobilized in the polyol phase thanks to the use of cationic triarylphosphines possessing pendent protonated amino groups in the acidic reaction medium or to the sulfonated phosphine TPPTS (trisodium triphenylphosphine-3,3',3''-trisulfonate). Owing to the insolubility of the products in the catalytic phase, this approach allowed the synthesis of monoesters of polyols with high selectivities as well as the easy separation of the catalyst through simple decantation.

Cross-metathesis of biosourced fatty acid derivatives: a step further toward improved reactivity.

The improved catalytic conversion of bioresources, namely unsaturated fatty acid derivatives, is presented. The targeted reaction is ruthenium-catalyzed cross-metathesis with functionalized olefins (α,ß-unsaturated esters), that affords shorter diesters. These can be used as biosourced (pre)monomers for the production of polyesters. It is demonstrated that switch from terminal to internal cross-metathesis partners (that is, from methyl acrylate to methyl crotonate) allows use of ppm-level catalyst loadings, while retaining high productivity and selectivity. This was exemplified on a commercial biosourced fatty acid methyl esters mixture, using minimal purification of the substrate, on a 50 g scale. We propose that this improved catalytic behavior is due to the sole presence of more stable alkylidene intermediates, as the notoriously unstable ruthenium methylidene species are not formed using an internal functionalized olefin.

Chiral ligands derived from monoterpenes: application in the synthesis of optically pure secondary alcohols via asymmetric catalysis.

The preparation of optically pure secondary alcohols in the presence of catalysts based on chiral ligands derived from monoterpenes, such as pinenes, limonenes and carenes, is reviewed. A wide variety of these ligands has been synthesized and used in several catalytic reactions, including hydrogen transfer, C-C bond formation via addition of organozinc compounds to aldehydes, hydrosilylation, and oxazaborolidine reduction, leading to high activities and enantioselectivities.

Synthesis of 1,4:3,6-dianhydrohexitols diesters from the palladium-catalyzed hydroesterification reaction.

The hydroesterification of alpha olefins has been used to synthesize diesters from bio-based secondary diols: isosorbide, isomannide, and isoidide. The reaction was promoted by 0.2% palladium catalyst generated in situ from palladium acetate/triphenylphosphine/para-toluene sulfonic acid. Optimized reaction conditions allowed the selective synthesis of the diesters with high yields and the reaction conditions could be scaled up to the synthesis of hundred grams of diesters from isosorbide and 1-octene with solvent-free conditions.

Isoprene-styrene chain shuttling copolymerization mediated by a lanthanide half-sandwich complex and a lanthanidocene: straightforward access to a new type of thermoplastic elastomers.

A lanthanide half-sandwich complex and a ansa lanthanidocene have been assessed for isoprene-styrene chain shuttling copolymerization with n-butylethylmagnesium (BEM). In the presence of 1 equiv BEM, a fully amorphous multiblock microstructure of soft and hard segments is achieved. The microstructure consists of poly(isoprene-co-styrene) blocks, with hard blocks rich in styrene and soft blocks rich in isoprene. The composition of the blocks and the resulting glass transition temperatures (Tg ) can be easily modified by changing the feed and/or the relative amount of the catalysts, highlighting a new class of thermoplastic elastomers (TPEs) with tunable transition temperatures. The materials self-organize into nanostructures in the solid state.

Nickel-catalysed hydroalkoxylation reaction of 1,3-butadiene: ligand controlled selectivity for the efficient and atom-economical synthesis of alkylbutenyl ethers.

The nickel-catalysed hydroalkoxylation of butadiene is promoted by a nickel(0)/dppb catalyst (dppb = 1,4-bis(diphenylphosphino)butane; see scheme). By following this new synthetic procedure, alkylbutenyl ethers are readily obtained from an alcohol and 1,3-butadiene with exclusion of dimerisation and telomerisation products.

Synthesis of α-alkylated ß-ketoesters by alkoxycarbonylation/Michael addition domino reaction.

The palladium-catalyzed alkoxycarbonylation of an α-chloro ketone can be efficiently combined to a Michael addition reaction in a new two-step domino reaction, allowing the synthesis of original highly functionalized α-alkylated ß-ketoesters. The scope of the reaction was extended to several α-chloro ketones and Michael acceptors with moderate to very good yields.

α-Amino-oximes based on optically pure limonene: a new ligands family for ruthenium-catalyzed asymmetric transfer hydrogenation.

A new family of bifunctional, optically pure α-amino-oxime ligands based on (R)-limonene has been synthesized and used as chiral inducers for enantioselective hydrogen transfer reactions on various ketones in the presence of ruthenium catalysts. The X-ray structures of Ru-amino-oxime complexes are also described.

17O NMR gives unprecedented insights into the structure of supported catalysts and their interaction with the silica carrier.

Flame silica was surface-labeled with (17)O, through isotopic enrichment of both siloxanes and silanols. After heat treatment at 200 and 700 °C under vacuum, the resulting partially dehydroxylated silica materials were investigated by high-field solid-state (1)H and (17)O NMR. More specifically, MQ MAS and HMQC sequences were used to probe the (17)O local environment. In a further step, these (17)O-tagged supports were used for the preparation of supported catalysts by reaction with perhydrocarbyl transition metal derivatives (zirconium tetraalkyl, tantalum trisalkyl-alkylidene, and tungsten trisalkyl-alkylidyne complexes). Detailed (17)O 1D and 2D MQ and HMQC MAS NMR studies demonstrate that signals in the Si-OH, Si-O-Si, and Si-O-metal regions are highly sensitive to local structural modifications, thanks to (17)O wide chemical shift and quadrupolar constant ranges. Experimental results were supported by DFT calculations. From the selective surface labeling, unprecedented information on interactions between supported catalysts and their inorganic carrier has been extracted.

Pd-catalyzed domino carbonylative-decarboxylative allylation: an easy and selective monoallylation of ketones.

In the presence of an allyl alcohol, α-chloroacetophenones undergo an allyloxycarbonylation reaction followed by in situ decarboxylative allylation to selectively afford the corresponding monoallylated ketones via a Pd-catalyzed domino sequence. The scope of the reaction was extended to substituted α-chloroacetophenones as well as various allyl alcohols.

Effect of chain unsaturation on the self-association of tri- and tetraethylene glycol octyl ethers obtained by butadiene telomerization.

2,7-Octadienyl ethers of tri- and tetraethylene glycol (C(8:2)E(3) and C(8:2)E(4)) have been synthesized by the atom-economical butadiene telomerization of the corresponding poly(ethylene glycols). On one hand, this synthetic path is attractive because it is expeditious and environmentally benign, and on the other hand, it provides unconventional amphiphiles for which the lipophilic chains possess two double bonds. These two unsaturations increase the global hydrophilicity of the compound, which is also highlighted by the modelization of the compounds using the conductor-like screening model for real solvents (COSMO-RS). The behavior of C(8:2)E(3) and C(8:2)E(4) in binary amphiphile/water and ternary amphiphile/oil/water systems is therefore greatly modified compared to that of the conventional fully saturated homologues (C(8)E(3) and C(8)E(4)) that are easily obtained after hydrogenation. This results in a lowered efficiency of the unsaturated compounds for oil solubilization. The usual Winsor-type microemulsion systems are formed, and for the same oil, the DLS investigation of the microstructure of the Winsor I microemulsion does not highlight any difference in the self-association between the unsaturated and saturated compounds.

Telomerisation of 1,3-butadiene with 1,4:3,6-dianhydrohexitols: an atom-economic and selective synthesis of amphiphilic monoethers from agro-based diols.

The telomerisation of 1,3-butadiene with a Pd/TPPTS catalytic system in water or an organic solvent was used for the synthesis of C8 ethers from isosorbide, an agro-based diol. The use of water/oil biphasic reaction conditions allowed the selective synthesis of monoethers with improved rates upon using inorganic bases as promotors. As isosorbide is a non-symmetric diol, the two hydroxyl groups display different reactivities. 2-O-substituted-monoethers were preferentially obtained if water was used as the solvent, whereas in DMSO 5-O-substituted monoethers were the major products. Complete conversions of isosorbide with up to 94% monoether selectivities were obtained. The optimized reaction conditions were successfully applied to isomannide and isoidide for the selective synthesis of the derived ethers. An improved reactivity of the endo-hydroxy groups of isosorbide and isomannide versus the exo-hydroxy groups of isosorbide and isoidide was observed if the reaction was performed in DMSO instead of water.

Unprecedented dual behaviour of a half-sandwich scandium-based initiator for both highly selective isoprene and styrene polymerisation.

Highly cis-1,4 polymerisation of isoprene and syndiospecific polymerisation of styrene were conducted using the same borohydrido half-sandwich scandium pre-initiator.

Catalytic Chain Transfer (co-)Polymerization: Unprecedented Polyisoprene CCG and a New Concept to Tune the Composition of a Statistical Copolymer.

Borohydrido-halflanthanidocene/dialkylmagnesium combinations are found to be powerful catalytic systems for the chain transfer polymerization of isoprene and its copolymerization with styrene. A behavior close to a lanthanide catalyzed polyisoprene chain growth on magnesium is reported. Transmetalation is further shown to occur in the course of the statistical copolymerization of isoprene and styrene. For the same monomer feed, the amount of styrene inserted in the copolymer can be increased by a factor 3 using 10 equiv. dialkylmagnesium versus 1 in the range of our experimental conditions. Chain transfer in the course of a metal catalyzed statistical copolymerization may thus be viewed as a new and original way for the control of the composition of a copolymer.

Cationic borohydrido-neodymium complex: synthesis, characterization and its application as an efficient pre-catalyst for isoprene polymerisation.

The cationic borohydrido lanthanide complex [Nd(BH4)2(THF)5][B(C6F5)4]1, prepared from the reaction of Nd(BH4)3(THF)3 with [HNMe2Phl[B(C6F5)4], is highly active towards isoprene polymerisation upon activation with Al(i-Bu)3, whereas the in situ prepared ternary catalytic combination Nd(BH4)3(THF)3/[HNMe2Ph][B(C6F5)4]/Al(i-Bu)3, albeit less active, displays higher cis-selectivity and better control in terms of macromolecular data.

A well-defined silica-supported dinuclear tungsten(III) amido species: synthesis, characterization and reactivity.

Grafting of [W(2)(NMe(2))(6)] onto dehydroxylated silica affords the well-defined surface species [([triple bond, length as m-dash]Si-O)W(2)(NMe(2))(5)], characterized by elemental analysis, and infrared, Raman and NMR spectroscopies, and the catalytic reactivity of this supported tungsten(III) d(3)-d(3) dimer and of its alkoxide derivatives towards alkynes has been probed.

Well-defined silica-supported rare-earth silylamides.

Rare-earth silylamides [Ln{N(SiMe3)2}3] [1a-d, Ln = Y (1a), La (1b), Nd (1c), Sm (1d)] react with partially dehydroxylated silica to generate the singly surface-bonded species [(Si-O)Ln{N(SiMe3)2}2] (2a-d). Trimethylsilylation of silanols occurs during the grafting process, affording in fine a hydroxyl-free surface. Contacting these well-defined surface species with excess triphenylphosphine oxide yields [(Si-O)Ln{N(SiMe3)2}2(OPPh3)] surface adducts 3a-d as the major (80%) species, leaving about 20% of unreacted siloxide bisamido species (20%). In addition to elemental analysis and infrared spectroscopy, solid-state NMR spectroscopy was used to characterize these new materials and proved to be a particularly efficient tool for the study of the paramagnetic Nd- and Sm-containing materials and for providing unambiguous verification of OPPh3 coordination on the rare-earth center. Silica-supported rare-earth amides 2a-d are active catalysts for 1-hexene and styrene hydrosilylation and for phenylacetylene dimerization. When compared to the molecular species 1a-d, grafting of the catalyst induces significant changes in the activity and selectivity of these systems.

Rhodium complexes non-covalently bound to cyclodextrins: novel water-soluble supramolecular catalysts for the biphasic hydroformylation of higher olefins.

A new class of cationic alpha-cyclodextrins bearing 2-hydroxy-3-trimethylammoniopropyl groups has been synthesised. We investigated their efficiency as mass-transfer promoters in a biphasic hydroformylation reaction catalysed by a rhodium trisulfonated triphenylphosphine system. These cationic alpha-cyclodextrins greatly increased the reaction rate, the chemoselectivity, and, surprisingly, the linear-to-branched aldehyde ratio. We attributed this unexpected enhancement of the linear-to-branched aldehyde ratio to the in situ formation of new catalytic supramolecular species obtained by ion-exchange between the catalyst ligand and the cationic alpha-cyclodextrins.

Silica-supported lanthanide silylamides for methyl methacrylate polymerisation: controlled grafting induces controlled reactivity.

Lanthanide silylamides were grafted onto non-porous silica dehydroxylated at various temperatures, and the surface species nature and relative distribution were correlated with MMA polymerisation activity and selectivity.