ABSTRACT
A dual-channel propagation controlled photonic crystal fiber (PCF)-based plasmonic sensor was presented to detect multiple analytes simultaneously. Plasmonic micro-channels were placed on the outer surface of the PCF, which facilitates an easy sensing mechanism. The sensor was numerically investigated by the finite element method (FEM) with the perfectly matched layer (PML) boundary conditions. The proposed sensor performances were analyzed based on optimized sensor parameters, such as confinement loss, resonance coupling, resolution, sensitivity, and figure of merit (FOM). The proposed sensor showed a maximum wavelength sensitivity (WS) of 25,000 nm/refractive index unit (RIU) with a maximum sensor resolution (SR) of 4.0 × 10-6 RIU for channel 2 (Ch-2), and WS of 3000 nm/RIU with SR of 3.33 × 10-5 RIU for channel 1 (Ch-1). To the best of our knowledge, the proposed sensor exhibits the highest WS compared with the previously reported multi-analyte based PCF surface plasmon resonance (SPR) sensors. The proposed sensor could detect the unknown analytes within the refractive index (RI) range of 1.32 to 1.39 in the visible to near infrared region (550 to 1300 nm). In addition, the proposed sensor offers the maximum Figure of Merit (FOM) of 150 and 500 RIU-1 with the limit of detection (LOD) of 1.11 × 10-8 RIU2/nm and 1.6 × 10-10 RIU2/nm for Ch-1 and Ch-2, respectively. Due to its highly sensitive nature, the proposed multi-analyte PCF SPR sensor could be a prominent candidate in the field of biosensing to detect biomolecule interactions and chemical sensing.
ABSTRACT
A simple dual-core D-shaped plasmonic refractive index (RI) sensor with an open-arch channel is introduced in this paper. A thin plasmonic gold layer is inserted on the slotted portion, which makes the sensor cost effective. By introducing a ring in the flat surface of the D-shaped structure, the coupling effect is increased, which enhances sensor performance. The commonly used finite element method is applied to characterize sensor performance. Numerical investigation under the wavelength interrogation method shows maximum spectral sensitivities of 16,000 nm/RIU and 17,000 nm/RIU along with corresponding resolutions of 6.25×10-6RIU and 5.88×10-6RIU for x and y polarizations, respectively. In tandem with this, maximum amplitude sensitivities governed by the amplitude interrogation method are calculated at about 2,603.7000RIU-1 and 3,432.1929RIU-1 for x and y polarizations, respectively. The proposed sensor exhibits high figures of merit of 320RIU-1 and 283.33RIU-1 for x and y polarizations, respectively, in the RI detection range of 1.33 to 1.44. Moreover, the impact on sensitivity with the overall sensor behavior is analyzed by altering geometrical parameters such as pitch, air hole diameter, and gold layer thickness. So, with an eye toward sensor performance and economic viability, this sensor is assignable to bio-sensing applications.