Demand driven salt clean-up in a molten salt fast reactor - Defining a priority list.

The PUREX technology based on aqueous processes is currently the leading reprocessing technology in nuclear energy systems. It seems to be the most developed and established process for light water reactor fuel and the use of solid fuel. However, demand driven development of the nuclear system opens the way to liquid fuelled reactors, and disruptive technology development through the application of an integrated fuel cycle with a direct link to reactor operation. The possibilities of this new concept for innovative reprocessing technology development are analysed, the boundary conditions are discussed, and the economic as well as the neutron physical optimization parameters of the process are elucidated. Reactor physical knowledge of the influence of different elements on the neutron economy of the reactor is required. Using an innovative study approach, an element priority list for the salt clean-up is developed, which indicates that separation of Neodymium and Caesium is desirable, as they contribute almost 50% to the loss of criticality. Separating Zirconium and Samarium in addition from the fuel salt would remove nearly 80% of the loss of criticality due to fission products. The theoretical study is followed by a qualitative discussion of the different, demand driven optimization strategies which could satisfy the conflicting interests of sustainable reactor operation, efficient chemical processing for the salt clean-up, and the related economic as well as chemical engineering consequences. A new, innovative approach of balancing the throughput through salt processing based on a low number of separation process steps is developed. Next steps for the development of an economically viable salt clean-up process are identified.

Toxicity of noradrenaline, a novel anti-biofouling component, to two non-target zooplankton species, Daphnia magna and Ceriodaphnia dubia.

Noradrenaline (NA) is the active component of novel antifouling agents and acts by preventing attachment of fouling organisms. The goal of this study was to examine the toxicity of NA to the non-target zooplankton D. magna and C. dubia. Neonates were exposed to one of five concentrations of NA and effects on survival, reproduction and molting were determined. Calculated LC50 values were determined to be 46 and 38 µM in C. dubia and D. magna, respectively. A 10-day C. dubia study found that reproduction metrics were significantly impacted at non-lethal concentrations. In D. magna, concentrations greater than 40 µM significantly impacted molting. A toxicity test was conducted with D. magna using oxidized NA, which yielded similar results. These data indicate that both NA and oxidized NA are toxic to non-target zooplankton. Results obtained from this study can be used to guide future ecological risk assessments of catecholamine-based antifouling agents.

Development of a PCR-free electrochemical point of care test for clinical detection of methicillin resistant Staphylococcus aureus (MRSA).

An MRSA assay requiring neither labeling nor amplification of target DNA has been developed. Sequence specific binding of fragments of bacterial genomic DNA is detected at femtomolar concentrations using electrochemical impedance spectroscopy (EIS). This has been achieved using systematic optimisation of probe chemistry (PNA self-assembled monolayer film on gold electrode), electrode film structure (the size and nature of the chemical spacer) and DNA fragmentation, as these are found to play an important role in assay performance. These sensitivity improvements allow the elimination of the PCR step and DNA labeling and facilitate the development of a simple and rapid point of care test for MRSA. Assay performance is then evaluated and specific direct detection of the MRSA diagnostic mecA gene from genomic DNA, extracted directly from bacteria without further treatment is demonstrated for bacteria spiked into saline (10(6) cells per mL) on gold macrodisc electrodes and into human wound fluid (10(4) cells per mL) on screen printed gold electrodes. The latter detection level is particularly relevant to clinical requirements and point of care testing where the general threshold for considering a wound to be infected is 10(5) cells per mL. By eliminating the PCR step typically employed in nucleic acid assays, using screen printed electrodes and achieving sequence specific discrimination under ambient conditions, the test is extremely simple to design and engineer. In combination with a time to result of a few minutes this means the assay is well placed for use in point of care testing.

Electrochemical control of a DNA Holliday Junction nanoswitch by Mg2+ ions.

The molecular conformation of a synthetic branched, 4-way DNA Holliday junction (HJ) was electrochemically switched between the open and closed (stacked) conformers. Switching was achieved by electrochemically induced quantitative release of Mg(2+) ions from the oxidised poly(N-methylpyrrole) film (PPy), which contained polyacrylate as an immobile counter anion and Mg(2+) ions as charge compensating mobile cations. This increase in the Mg(2+) concentration screened the electrostatic repulsion between the widely separated arms in the open HJ configuration, inducing switching to the closed conformation. Upon electrochemical reduction of PPy, entrapment of Mg(2+) ions back into the PPy film induced the reverse HJ switching from the closed to open state. The conformational transition was monitored using fluorescence resonance energy transfer (FRET) between donor and acceptor dyes each located at the terminus of one of the arms. The demonstrated electrochemical control of the conformation of the used probe-target HJ complex, previously reported as a highly sequence specific nanodevice for detecting of unlabelled target [Buck, A.H., Campbell, C.J., Dickinson, P., Mountford, C.P., Stoquert, H.C., Terry, J.G., Evans, S.A.G., Keane, L., Su, T.J., Mount, A.R., Walton, A.J., Beattie, J.S., Crain, J., Ghazal, P., 2007. Anal. Chem., 79, 4724-4728], allows the development of electronically addressable DNA nanodevices and label-free gene detection assays.

Molecular recognition with DNA nanoswitches: effects of single base mutations on structure.

This paper investigates the properties of a simple DNA-based nanodevice capable of detecting single base mutations in unlabeled nucleic acid target sequences. Detection is achieved by a two-stage process combining first complementary-base hybridization of a target and then a conformational change as molecular recognition criteria. A probe molecule is constructed from a single DNA strand designed to adopt a partial cruciform structure with a pair of exposed (unhybridized) strands. Upon target binding, a switchable cruciform construct (similar to a Holliday junction) is formed which can adopt open and closed junction conformations. Switching between these forms occurs by junction folding in the presence of divalent ions. It has been shown from the steady-state fluorescence of judiciously labeled constructs that there are differences between the fluorescence resonance energy transfer (FRET) efficiencies of closed forms, dependent on the target sequence near the branch point, where the arms of the cruciform cross. This difference in FRET efficiency is attributed to structural variations between these folded junctions with their different branch point sequences arising from the single base mutations. This provides a robust means for the discrimination of single nucleotide mismatches in a specific region of the target. In this paper, these structural differences are analyzed by fitting observed time-resolved donor fluorescence decay data to a Gaussian distribution of donor-acceptor separations. This shows the closest mean separation (approximately 40 A) for the perfectly matched case, whereas larger separations (up to 50 A) are found for the single point mutations. These differences therefore indicate a structural basis for the observed FRET differences in the closed configuration which underpins the operation of these devices as biosensors capable of resolving single base mutations.

TEM immunocytochemistry of a 48 kDa MW organic matrix phosphoprotein produced in the mantle epithelial cells of the Eastern oyster (Crassostrea virginica).

Immunohistochemical TEM of Eastern oyster (Crassostrea virginica) mantle epithelial cells using a polyclonal antibody to a gel purified 48 kDa MW oyster shell phosphoprotein revealed that it is phosphorylated in the Golgi, packaged into secretory vesicles and subsequently exocytosed across the apical membrane of specialized cells. These phosphoprotein producing cells are concentrated along the mantle side facing the shell, in the region of the outer mantle lobe. A layer of calcium enriched immuno-reactive mucous is associated with the apical microvilli of these cells. The 48 kDa phosphoprotein forms a component of the fibrous organic matrix and appears to be involved in calcium supply thus enabling crystal growth at the mineralization front.

Time-resolved FRET and FLIM of four-way DNA junctions.

Conformational transitions in a 4-way DNA junction when titrated with ionic solutions are studied using time-resolved fluorescence resonance energy transfer. Parameters characterising the transition in terms of critical ion concentration (c1/2) and the Hill coefficient for ion binding are obtained by fitting a simple two-state model using steady-state spectra. Data obtained from a fluorescence lifetime plate reader and analysed by fitting a single exponential to donor fluorescence lifetime decays are shown to be in good agreement with the parameters obtained from steady-state measurements. Fluorescence lifetimes, however, offer advantages, particularly in being independent of fluorophore concentration, output intensity, inhomogeneity in the excitation source and output wavelength. We demonstrate preliminary FRET-FLIM images of DNA junction solutions obtained using a picosecond gated CCD which are in agreement with results from a fluorescence lifetime plate reader. The results suggest that time-resolved FRET-FLIM is sensitive to subtle structural changes and may be useful in assays based on 4-way DNA junctions.

The stability and characteristics of a DNA Holliday junction switch.

A Holliday junction (HJ) consists of four DNA double helices, with a branch point discontinuity at the intersection of the component strands. At low ionic strength, the HJ adopts an open conformation, with four widely spaced arms, primarily due to strong electrostatic repulsion between the phosphate groups on the backbones. At high ionic strength, screening of this repulsion induces a switch to a more compact (closed) junction conformation. Fluorescent labelling with dyes placed on the HJ arms allows this conformational switch to be detected optically using fluorescence resonance energy transfer (FRET), producing a sensitive fluorescent output of the switch state. This paper presents a systematic and quantitative survey of the switch characteristics of such a labelled HJ. A short HJ (arm length 8 bp) is shown to be prone to dissociation at low switching ion concentration, whereas an HJ of arm length 12 bp is shown to be stable over all switching ion concentrations studied. The switching characteristics of this HJ have been systematically and quantitatively studied for a variety of switching ions, by measuring the required ion concentration, the sharpness of the switching transition and the fluorescent output intensity of the open and closed states. This stable HJ is shown to have favourable switch characteristics for a number of inorganic switching ions, making it a promising candidate for use in nanoscale biomolecular switch devices.

Nucleation and growth of calcite on native versus pyrolyzed oyster shell folia.

The thin sheets of calcite, termed folia, that make up much of the shell of an oyster are covered by a layer of discrete globules that has been proposed to consist of agglomerations of protein and mineral. Foliar fragments, treated at 475 degrees C for 36 h to remove organic matter, were imaged by atomic force microscopy (AFM) as crystals grew on the foliar surfaces in artificial seawater at calcite supersaturations up to 52-fold. Crystals were also viewed later by scanning electron microscopy. After pyrolysis, the foliar globules persisted only as fragile remnants that were quickly washed away during AFM imaging, revealing an underlying morphology on the foliar laths of a tightly packed continuum of nanometer-scale protrusions. At intermediate supersaturations, crystal formation was seen immediately almost everywhere on these surfaces, each crystal having the same distinctive shape and orientation, even at the outset with crystals as small as a few nanometers. In contrast, nucleation did not occur readily on non-pyrolyzed foliar surfaces, and the crystals that did grow, although slowly at intermediate supersaturations, had irregular shapes. Possible crystallographic features of foliar laths are considered on the basis of the morphology of ectopic crystals and the atomic patterns of various surfaces. A model for foliar lath formation is presented that includes cycles of pulsed secretion of shell protein, removal of the protein from the mineralizing solution upon binding to mineral, and mineral growth at relatively high supersaturation over a time frame of about 1 h for each turn of the cycle.

Scleral perforations during peribulbar anaesthesia.

Scleral perforation is a recognised but uncommon complication of retrobulbar and peribulbar anaesthesia; most of the reported cases have required further intervention. We report 5 cases from our department that occurred between October 1991 and June 1992. Surgery was performed in all 5 cases without complications. Vitreous haemorrhage was noted on the first post-operative day in all patients; none of the patients required further intervention. Four of 5 patients achieved a final visual acuity of 6/9 and the fifth case was an amblyopic eye with a final acuity of 6/18.