Specific Non-Reducing Ends in Heparins from Different Animal Origins: Building Blocks Analysis Using Reductive Amination Tagging by Sulfanilic Acid.

Heparins are linear sulfated polysaccharides widely used as anticoagulant drugs. Their nonreducing-end (NRE) has been little investigated due to challenges in their characterization, but is known to be partly generated by enzymatic cleavage with heparanases, resulting in N-sulfated glucosamines at the NRE. Uronic NRE (specifically glucuronic acids) have been isolated from porcine heparin, with GlcA-GlcNS,3S,6S identified as a porcine-specific NRE marker. To further characterize NRE in heparinoids, a building block analysis involving exhaustive heparinase digestion and subsequent reductive amination with sulfanilic acid was performed. This study describes a new method for identifying heparin classical building blocks and novel NRE building blocks using strong anion exchange chromatography on AS11 columns for the assay, and ion-pair liquid chromatography-mass spectrometry for building block identification. Porcine, ovine, and bovine intestine heparins were analyzed. Generally, NRE on these three heparins are highly sulfated moieties, particularly with 3-O sulfates, and the observed composition of the NRE is highly dependent on heparin origin. At the highest level of specificity, the isolated marker was only detected in porcine heparin. However, the proportion of glucosamines in the NRE and the proportion of glucuronic/iduronic configurations in the NRE uronic moieties greatly varied between heparin types.

New Insights in Thrombin Inhibition Structure-Activity Relationships by Characterization of Octadecasaccharides from Low Molecular Weight Heparin.

Low Molecular Weight Heparins (LMWH) are complex anticoagulant drugs that mainly inhibit the blood coagulation cascade through indirect interaction with antithrombin. While inhibition of the factor Xa is well described, little is known about the polysaccharide structure inhibiting thrombin. In fact, a minimal chain length of 18 saccharides units, including an antithrombin (AT) binding pentasaccharide, is mandatory to form the active ternary complex for LMWH obtained by alkaline ß-elimination (e.g., enoxaparin). However, the relationship between structure of octadecasaccharides and their thrombin inhibition has not been yet assessed on natural compounds due to technical hurdles to isolate sufficiently pure material. We report the preparation of five octadecasaccharides by using orthogonal separation methods including size exclusion, AT affinity, ion pairing and strong anion exchange chromatography. Each of these octadecasaccharides possesses two AT binding pentasaccharide sequences located at various positions. After structural elucidation using enzymatic sequencing and NMR, in vitro aFXa and aFIIa were determined. The biological activities reveal the critical role of each pentasaccharide sequence position within the octadecasaccharides and structural requirements to inhibit thrombin. Significant differences in potency, such as the twenty-fold magnitude difference observed between two regioisomers, further highlights the importance of depolymerisation process conditions on LMWH biological activity.

Analytical comparison of a US generic enoxaparin with the originator product: The focus on comparative assessment of antithrombin-binding components.

Enoxaparin sodium, a low-molecular-weight heparin (LMWH) prepared from porcine intestinal heparin, is widely used for the prevention and treatment of venous thromboembolism. The antithrombotic activity of heparin is mediated mainly through its activation of antithrombin (AT) and subsequent inhibition of coagulation factors. Heparin is a complex heteropolymer and the sulfation pattern of its alternating uronic acid and glucosamine sugar units is a major factor influencing its biological activity. The manufacturing process itself is associated with the introduction of exogenous microheterogeneities that may further affect its biological efficacy. This is important since enoxaparin is prepared by depolymerizing the heparin with the aim of optimizing its biological activity and safety. Changes during its manufacture could thus affect its biological activity and safety. The current study was performed to assess potential differences between the originator enoxaparin and a new generic enoxaparin commercialized by Teva. Heparinase digestion, AT affinity chromatography, gel permeation chromatography, anion exchange chromatography, and nuclear magnetic resonance methodologies were used. The results indicated differences in oligosaccharides related to the cleavage selectivity around the heparin AT-binding sequences of the Teva Enoxaparin Sodium Injection, USP and the originator Sanofi enoxaparin. These differences influence the strength of the AT-binding affinity of the individual oligosaccharides, their ability to activate AT and, therefore, the inhibitory potency on the proteases of the coagulation cascade. This study, together with other published analytical reports, describes specific compositional differences between generics and originator LWMHs. However, it is yet to be established whether such variations might have any clinical relevance.

Analytical and statistical comparability of generic enoxaparins from the US market with the originator product.

Low-molecular-weight heparins (LMWHs) are complex anticoagulant drugs, made from heparin porcine mucosa starting material. Enoxaparin sodium manufactured by Sanofi is one of the most widely prescribed LMWHs and has been used since 1993 in the USA. In 2010, US Food and Drug Administration approval for supplying generic enoxaparin was granted to Sandoz and subsequently to Amphastar. Little is known, however, of the differences in composition of these preparations. In this study, samples from several batches of generic enoxaparins were purchased on the US market and analyzed with state of the art methodologies, including disaccharide building blocks quantification, nuclear magnetic resonance (NMR), and a combination of orthogonal separation techniques. Direct high-performance liquid chromatography analysis of the different enoxaparin batches revealed distinct process fingerprints associated with each manufacturer. Disaccharide building block analysis showed differences in the degree of sulfation, the presence of glycoserine derivatives, as well as in proportions of disaccharides. Results were compared by statistical approaches using multivariate analysis with a partial least squares discriminant analysis methodology. The variations were statistically significant and allowed a clear distinction to be made between the enoxaparin batches according to their manufacturer. These results were further confirmed by orthogonal analytical techniques, including NMR, which revealed compositional differences of oligosaccharides both in low- and high-affinity antithrombin fractions of enoxaparin.

Antithrombin-binding oligosaccharides: structural diversities in a unique function?

Heparin-antithrombin interaction is one of the most documented examples of heparin/protein complexes. The specific heparin sequence responsible for the binding corresponds to a pentasaccharide sequence with an internal 3-O-sulfated glucosamine residue. Moreover, the position of the pentasaccharide along the chain as well as the structure of the neighbor units affects the affinity to antithrombin. The development of separation and purification techniques, in conjunction with physico-chemical approaches (mostly NMR), allowed to characterize several structural variants of antithrombin-binding oligosaccharides, both in the free state and in complex with antithrombin. The article provides an overview of the studies that lead to the elucidation of the mechanism of interaction as well as acquiring new knowledge in heparin biosynthesis.

Isolation of a pure octadecasaccharide with antithrombin activity from an ultra-low-molecular-weight heparin.

Heparin and low-molecular-weight heparins (LMWHs) are anticoagulant drugs that mainly inhibit the coagulation cascade by indirectly interacting with factor Xa and factor IIa (thrombin). Inhibition of factor Xa by antithrombin (AT) requires the activation of AT by specific pentasaccharide sequences containing 3-O-sulfated glucosamine. Activated AT also inhibits thrombin by forming a stable ternary complex of AT, thrombin, and a polysaccharide (requires at least an 18-mer/octadeca-mer polysaccharide). The full structure of any naturally occurring octadecasaccharide sequence has yet to be determined. In the context of the development of LMWH biosimilars, structural data on such important biological mediators could be helpful for better understanding and regulatory handling of these drugs. Here we present the isolation and identification of an octadecasaccharide with very high anti-factor Xa activity (∼3 times higher than USP [U.S. Pharmacopeia] heparin). The octadecasaccharide was purified using five sequential chromatographic methods with orthogonal specificity, including gel permeation, AT affinity, strong anion exchange, and ion-pair chromatography. The structure of the octadecasaccharide was determined by controlled enzymatic sequencing and nuclear magnetic resonance (NMR). The isolated octadecasaccharide contained three consecutive AT-binding sites and was tested in coagulation assays to determine its biological activity. The isolation of this octadecasaccharide provides new insights into the modulation of thrombin activity.

Heparin sodium compliance to USP monograph: structural elucidation of an atypical 2.18 ppm NMR signal.

The ¹H nuclear magnetic resonance (NMR) acceptance criteria in the new heparin US Pharmacopeia (USP) monograph do not take into account potential structural modifications responsible for any extra signals observed in ¹H NMR spectra, some purified heparins may be non-compliant under the proposed new USP guidelines and incorrectly classified as unsuitable for pharmaceutical use. Heparins from the "ES" source, containing an extra signal at 2.18 ppm, were depolymerized under controlled conditions using heparinases I, II, and III. The oligosaccharides responsible for the 2.18 ppm signal were enriched using orthogonal chromatographic techniques. After multiple purification steps, we obtained an oligosaccharide mixture containing a highly enriched octasaccharide bearing the structural modification responsible for the extra signal. Following heparinase I depolymerization, a pure tetrasaccharide containing the fingerprint structural modification was isolated for full structural determination. Using 1D and 2D ¹H NMR spectroscopy, the structural moiety responsible for the extra signal at 2.18 ppm was identified as an acetyl group on the heparin backbone, most likely resulting from a very minor manufacturing process side reaction that esterifies the uronic acid at position 3. Such analytical peculiarity has always been present in this heparin source and it was used safety over the years.

Heparin sodium compliance to the new proposed USP monograph: elucidation of a minor structural modification responsible for a process dependent 2.10 ppm NMR signal.

Heparin is a highly sulfated hetero polysaccharide mixture found and extracted from mammalian tissues. It has been widely used as an anticoagulant drug during the past decades. In the new proposed USP heparin monograph, the ¹H NMR acceptance criteria to prevent contamination by over sulfated chondroitin sulfate (OSCS), or other persulfated glycosaminoglycans, specifies that no unidentified signals greater than 4% of the mean of signal height of 1 and 2 should be present in the following ranges: 0.10-2.00, 2.10-3.20, and 5.70-8.00 ppm. However, those criteria do not take into account the impact of potential structural modifications generated by the heparin manufacturing processes. In fact, starting from pig mucosa, heparin purification involves oxidizing reagents such as sodium peroxide, potassium permanganate and peracetic acid. In the present work, we demonstrate that potassium permanganate treated heparins show a small but characteristic extra signal at 2.10 ppm. Controlled heparinase I depolymerisation is used to target and excise the oligosaccharide responsible for this extra signal from the polysaccharide backbone. By using orthogonal chromatographic techniques, the fingerprint oligosaccharide was isolated and its structure elucidated. Without the identification of this structural moiety, such purified heparins may have been considered as non-compliant drug substance and not suitable for pharmaceutical use.

Chromatographic analysis and sequencing approach of heparin oligosaccharides using cetyltrimethylammonium dynamically coated stationary phases.

C(18) and C(8) bonded stationary phases dynamically coated with cetyltrimethylammonium (CTA) and strong anion exchange (SAX) were developed to obtain separations of oligosaccharide mixtures resulting from chemical or enzymatic depolymerization of heparin. With this method, the retention of sulfated oligosaccharides is directly adjustable depending on the amount of CTA adsorbed into the column. Oligosaccharides containing up to 20 sulfates were separated with a resolving power superior to that of conventional SAX analysis. The stability of the column coating enables hundreds of injections. Using ammonium methane sulfonate aqueous solutions as ultraviolet transparent mobile phases, it was possible to set up double detection, including selective detection of acetylated oligosaccharides. Analytical gel permeation chromatography was directly coupled to CTA-SAX, obtaining a two-dimensional profile of analyzed oligosaccharidic mixtures. A sequencing method of heparin oligosaccharides using partial depolymerization by heparinases according to their size and sulfation pattern and digest analysis by CTA-SAX was developed. A direct application of this method to the analysis of oligosaccharide mixtures obtained by complete digestion of heparins by heparinases I, II, and III was done. It allowed a reliable quantification of heparin building blocks. We also focused our attention on di- and tetrasaccharidic species containing the 3-O-sulfated glucosamines taken as markers of the active sites for antithrombin III. The method was also applied to more complex mixtures resulting from porcine heparin partially depolymerized with heparinase I. The specificity of the reaction was studied up to decasaccharidic fractions.