Robust, Long-Term, and Exceptionally Sensitive Microneedle-Based Bioimpedance Sensor for Precision Farming.

Precision farming has the potential to increase global food production capacity whilst minimizing traditional inputs. However, the adoption and impact of precision farming are contingent on the availability of sensors that can discern the state of crops, while not interfering with their growth. Electrical impedance spectroscopy offers an avenue for nondestructive monitoring of crops. To that end, it is reported on the deployment of impedimetric sensors utilizing microneedles (MNs) that can be used to pierce the waxy exterior of plants to obtain sensitive impedance spectra in open-air settings with an average relative noise value of 3.83%. The sensors are fabricated using a novel micromolding and release method that is compatible with UV photocurable and thermosetting polymers. Assessments of the quality of the MNs under scanning electron microscopy show that the replication process is high in fidelity to the original design of the master mold and that it can be used for upward of 20 replication cycles. The sensor's performance is validated against conventional planar sensors for obtaining the impedance values of Arabidopsis thaliana. As a change is detected in impedance due to lighting and hydration, this raises the possibility for their widespread use in precision farming.

3D Printed Microneedle Array for Electroporation.

In-vitro transfection of cells by electroporation is a widely used approach in cell biology and medicine. The transfection method is highly dependent on the cell culture's electrical resistance, which is strongly determined by differences in the membranes, but also on the morphology of the electrodes. Microneedle (MN)-based electrodes have been used to concentrate the electrical field during electroporation, and therefore maximize its effect on cell membrane permeability. So far, the methods used for the fabrication of MN electrodes have been relatively limited with respect to the needle design. In this work, we provide a method to fabricate MNs using 3D printing, which is a technology that provides a high degree of flexibility with respect to geometry and dimensions. Pyramidal-shaped MN designs were fabricated and tested on HCT116 cancer cells. Customization of the tips of the pyramids permits tailoring of the electrical field in the vicinity of the cell membranes. The fabricated device enables low-voltage (2 V) electroporation, eliminating the need for the use of specialized chemical buffers. The results show the potential of this method, which can be exploited and optimized for many different applications, and offer a very accessible approach for in-vitro electroporation and cell studies. The MNs can be customized to create complex structures, for example, for a multi-culture cell environment.

Strain-induced Differentiation of Mesenchymal Stem Cells.

Directing the fate of human mesenchymal stem/stromal cells (hMSCs) toward bone formation using mechanical strain is a promising approach in regenerative medicine related to bone diseases. Numerous studies have evaluated the effects of vibration or cyclic tensile strain on MSCs towards developing a mechanically-based method for stimulating differentiation. Here, we study the differentiation of hMSCs cultured on elastic polydimethylsiloxane (PDMS) membrane, which is magnetically actuated to induce periodically varying strain. The strain distribution across the membrane was calculated by finite-element modeling and demonstrates three main areas of different strain amplitudes. The strain effect on the hMSCs was evaluated by measuring the mineralization of differentiated hMSCs using Alizarin S red stain. The results indicate a strain-dependent differentiation of hMSCs, where the highest region of strain on the membrane resulted in the most accelerated differentiation. Osteogenic differentiation was achieved as early as two weeks, which is significantly sooner than control hMSCs treated with osteogenic media alone.