Nano-Structured Materials under Irradiation: Oxide Dispersion-Strengthened Steels.

Oxide dispersion-strengthened materials are reinforced by a (Y, Ti, O) nano-oxide dispersion and thus can be considered as nanostructured materials. In this alloy, most of the nanoprecipitates are (Y, Ti, O) nano-oxides exhibiting a Y2Ti2O7 pyrochlore-like structure. However, the lattice structure of the smallest oxides is difficult to determine, but it is likely to be close to the atomic structure of the host matrix. Designed to serve in extreme environments-i.e., a nuclear power plant-the challenge for ODS steels is to preserve the nano-oxide dispersion under irradiation in order to maintain the excellent creep properties of the alloy in the reactor. Under irradiation, the nano-oxides exhibit different behaviour as a function of the temperature. At low temperature, the nano-oxides tend to dissolve owing to the frequent ballistic ejection of the solute atoms. At medium temperature, the thermal diffusion balances the ballistic dissolution, and the nano-oxides display an apparent stability. At high temperature, the nano-oxides start to coarsen, resulting in an increase in their size and a decrease in their number density. If the small nano-oxides coarsen through a radiation-enhanced Ostwald ripening mechanism, some large oxides disappear to the benefit of the small ones through a radiation-induced inverse Ostwald ripening. In conclusion, it is suggested that, under irradiation, the nano-oxide dispersion prevails over dislocations, grain boundaries and free surfaces to remove the point defects created by irradiation.

Lattice Oxygen Exchange in Rutile IrO2 during the Oxygen Evolution Reaction.

The development of efficient acidic water electrolyzers relies on understanding dynamic changes of the Ir-based catalytic surfaces during the oxygen evolution reaction (OER). Such changes include degradation, oxidation, and amorphization processes, each of which somehow affects the material's catalytic performance and durability. Some mechanisms involve the release of oxygen atoms from the oxide's lattice, the extent of which is determined by the structure of the catalyst. While the stability of hydrous Ir oxides suffers from the active participation of lattice oxygen atoms in the OER, rutile IrO2 is more stable and the lattice oxygen involvement is still under debate due to the insufficient sensitivity of commonly used online electrochemical mass spectrometry. Here, we revisit the case of rutile IrO2 at the atomic scale by a combination of isotope labeling and atom probe tomography and reveal the exchange of oxygen atoms between the oxide lattice and water. Our approach enables direct visualization of the electrochemically active volume of the catalysts and allows for the estimation of an oxygen exchange rate during the OER that is discussed in view of surface restructuring and subsequent degradation. Our work presents an unprecedented opportunity to quantitatively assess the exchange of surface species during an electrochemical reaction, relevant for the optimization of the long-term stability of catalytic systems.

Correlative investigation of Mg doping in GaN layers grown at different temperatures by atom probe tomography and off-axis electron holography.

Correlation between off-axis electron holography and atom probe tomography (APT) provides morphological, chemical and electrical information about Mg doping (p-type) in gallium nitride (GaN) layers that have been grown at different temperatures at a nanometric scale. APT allows access to the three-dimensional distribution of atoms and their chemical nature. In particular, this technique allows visualisation of the Mg-rich clusters observed in p-doped GaN layers grown by metal-organic chemical vapour deposition. As the layer growth temperature increases, the cluster density decreases but their size indicted by the number of atoms increases. Moreover, APT reveals that threading dislocations are decorated with Mg atoms. Off-axis electron holography provides complementary information about the electrical activity of the Mg doping. As only a small fraction of dopant atoms are ionised at room temperature, this fraction is increased by annealing the specimen to 400 °C in situ in a transmission electron microscope (TEM). A strong reduction of the dopant electrical activity is observed for increases in the layer growth temperature. The correlation of APT with TEM-based techniques was shown to be a unique approach in order to investigate how the growth temperature affects both the chemical distribution and electrical activity of Mg dopant atoms.

Quantification Challenges for Atom Probe Tomography of Hydrogen and Deuterium in Zircaloy-4.

Analysis and understanding of the role of hydrogen in metals is a significant challenge for the future of materials science, and this is a clear objective of recent work in the atom probe tomography (APT) community. Isotopic marking by deuteration has often been proposed as the preferred route to enable quantification of hydrogen by APT. Zircaloy-4 was charged electrochemically with hydrogen and deuterium under the same conditions to form large hydrides and deuterides. Our results from a Zr hydride and a Zr deuteride highlight the challenges associated with accurate quantification of hydrogen and deuterium, in particular associated with the overlap of peaks at a low mass-to-charge ratio and of hydrogen/deuterium containing molecular ions. We discuss possible ways to ensure that appropriate information is extracted from APT analysis of hydrogen in zirconium alloy systems that are important for nuclear power applications.

Ti and its alloys as examples of cryogenic focused ion beam milling of environmentally-sensitive materials.

Hydrogen pick-up leading to hydride formation is often observed in commercially pure Ti (CP-Ti) and Ti-based alloys prepared for microscopic observation by conventional methods, such as electro-polishing and room temperature focused ion beam (FIB) milling. Here, we demonstrate that cryogenic FIB milling can effectively prevent undesired hydrogen pick-up. Specimens of CP-Ti and a Ti dual-phase alloy (Ti-6Al-2Sn-4Zr-6Mo, Ti6246, in wt.%) were prepared using a xenon-plasma FIB microscope equipped with a cryogenic stage reaching -135 °C. Transmission electron microscopy (TEM), selected area electron diffraction, and scanning TEM indicated no hydride formation in cryo-milled CP-Ti lamellae. Atom probe tomography further demonstrated that cryo-FIB significantly reduces hydrogen levels within the Ti6246 matrix compared with conventional methods. Supported by molecular dynamics simulations, we show that significantly lowering the thermal activation for H diffusion inhibits undesired environmental hydrogen pick-up during preparation and prevents pre-charged hydrogen from diffusing out of the sample, allowing for hydrogen embrittlement mechanisms of Ti-based alloys to be investigated at the nanoscale.

Calibration of Atom Probe Tomography Reconstructions Through Correlation with Electron Micrographs.

Although atom probe tomography (APT) reconstructions do not directly influence the local elemental analysis, any structural inferences from APT volumes demand a reliable reconstruction of the point cloud. Accurate estimation of the reconstruction parameters is crucial to obtain reliable spatial scaling. In the current work, a new automated approach of calibrating atom probe reconstructions is developed using only one correlative projection electron microscopy (EM) image. We employed an algorithm that implements a 2D cross-correlation of microstructural features observed in both the APT reconstructions and the corresponding EM image. We apply this protocol to calibrate reconstructions in a Cu(In,Ga)Se2-based semiconductor and in a Co-based superalloy. This work enables us to couple chemical precision to structural information with relative ease.

The Laplace Project: An integrated suite for preparing and transferring atom probe samples under cryogenic and UHV conditions.

We present sample transfer instrumentation and integrated protocols for the preparation and atom probe characterization of environmentally-sensitive materials. Ultra-high vacuum cryogenic suitcases allow specimen transfer between preparation, processing and several imaging platforms without exposure to atmospheric contamination. For expedient transfers, we installed a fast-docking station equipped with a cryogenic pump upon three systems; two atom probes, a scanning electron microscope / Xe-plasma focused ion beam and a N2-atmosphere glovebox. We also installed a plasma FIB with a solid-state cooling stage to reduce beam damage and contamination, through reducing chemical activity and with the cryogenic components as passive cryogenic traps. We demonstrate the efficacy of the new laboratory protocols by the successful preparation and transfer of two highly contamination- and temperature-sensitive samples-water and ice. Analysing pure magnesium atom probe data, we show that surface oxidation can be effectively suppressed using an entirely cryogenic protocol (during specimen preparation and during transfer). Starting with the cryogenically-cooled plasma FIB, we also prepared and transferred frozen ice samples while avoiding significant melting or sublimation, suggesting that we may be able to measure the nanostructure of other normally-liquid or soft materials. Isolated cryogenic protocols within the N2 glove box demonstrate the absence of ice condensation suggesting that environmental control can commence from fabrication until atom probe analysis.

Dopant radial inhomogeneity in Mg-doped GaN nanowires.

Using atom probe tomography, it is demonstrated that Mg doping of GaN nanowires grown by Molecular Beam Epitaxy results in a marked radial inhomogeneity, namely a higher Mg content in the periphery of the nanowires. This spatial inhomogeneity is attributed to a preferential incorporation of Mg through the m-plane sidewalls of nanowires and is related to the formation of a Mg-rich surface which is stabilized by hydrogen. This is further supported by Raman spectroscopy experiments which give evidence of Mg-H complexes in the doped nanowires. A Mg doping mechanism such as this, specific to nanowires, may lead to higher levels of Mg doping than in layers, boosting the potential interest of nanowires for light emitting diode applications.

Toward an accurate quantification in atom probe tomography reconstruction by correlative electron tomography approach on nanoporous materials.

In this contribution, we propose a protocol for analysis and accurate reconstruction of nanoporous materials by atom probe tomography (APT). The existence of several holes in porous materials makes both the direct APT analysis and reconstruction almost inaccessible. In the past, a solution has been proposed by filling pores with electron beam-induced deposition. Here, we present an alternative solution using an electro-chemical method allowing to fill even small and dense pores, making APT analysis possible. Concerning the 3D reconstruction, the microstructural features observed by electron tomography are used to finely calibrate the APT reconstruction parameters.

Atomic Scale Structural Characterization of Epitaxial (Cd,Cr)Te Magnetic Semiconductor.

A detailed knowledge of the atomic structure of magnetic semiconductors is crucial to understanding their electronic and magnetic properties, which could enable spintronic applications. Energy-dispersive X-ray spectrometry (EDX) in the scanning transmission electron microscope and atom probe tomography (APT) experiments reveal the formation of Cr-rich regions in Cd1-x Cr x Te layers grown by molecular beam epitaxy. These Cr-rich regions occur on a length scale of 6-10 nm at a nominal Cr composition of x=0.034 and evolve toward an ellipsoidal shape oriented along directions at a composition of x=0.083. Statistical analysis of the APT reconstructed volume reveals that the Cr aggregation increases with the average Cr composition. The correlation with the magnetic properties of such (Cd,Cr)Te layers is discussed within the framework of strongly inhomogeneous materials. Finally, difficulties in accurately quantifying the Cr distribution in the CdTe matrix on an atomic scale by EDX and APT are discussed.

Composition Analysis of III-Nitrides at the Nanometer Scale: Comparison of Energy Dispersive X-ray Spectroscopy and Atom Probe Tomography.

The enhancement of the performance of advanced nitride-based optoelectronic devices requires the fine tuning of their composition, which has to be determined with a high accuracy and at the nanometer scale. For that purpose, we have evaluated and compared energy dispersive X-ray spectroscopy (EDX) in a scanning transmission electron microscope (STEM) and atom probe tomography (APT) in terms of composition analysis of AlGaN/GaN multilayers. Both techniques give comparable results with a composition accuracy better than 0.6 % even for layers as thin as 3 nm. In case of EDX, we show the relevance of correcting the X-ray absorption by simultaneous determination of the mass thickness and chemical composition at each point of the analysis. Limitations of both techniques are discussed when applied to specimens with different geometries or compositions.