ABSTRACT
The study explores the novel use of oak bark (Quercus cortex) as a bio-filler in elastomeric composites, aligning with the global trend of plant-based biocomposites. Both modified and unmodified oak bark were investigated for their impact on the physicochemical properties of natural rubber (NR) composites. The bio-filler modified with n-octadecyltrimethoxysilane exhibited enhanced dispersion and reduced aggregates in the elastomeric matrix. NR composites containing more than 20 phr of unmodified and modified oak bark demonstrated an increased degree of cross-linking (αc > 0.21). Mechanical properties were optimal at 10-15 phr of oak bark and the sample with modified bio-filler (10 phr) achieved the highest tensile strength (15.8 MPa). Silanization and the addition of the bio-filler increased the hardness of vulcanizates. The incorporation of oak bark improved aging resistance at least two-fold due to phenolic derivatives with antioxidant properties. Hydrophobicity decreased with added bark, but silanization reversed the trend, making samples with a high content of oak bark the most hydrophobic (contact angle: 129°). Overall, oak bark shows promise as an eco-friendly, anti-aging filler in elastomeric composites, with modification enhancing compatibility and hydrophobicity.
ABSTRACT
The aim of the study was to produce new elastomeric materials containing butyl rubber (IIR) filled with silica and phyllosilicates (vermiculite, montmorillonite, perlite or halloysite tubes) with enhanced hydrophobicity and barrier properties and reduced chemical degradation. It was found that the filler type had a significant impact on the degree of cross-linking of butyl rubber and the properties of its vulcanizates. The highest degree of cross-linking and the highest mechanical strength were achieved for IIR composites filled with Arsil with perlite or halloysite tubes. The highest surface hydrophobicity (119°) was confirmed for the IIR vulcanizates with Arsil and montmorillonite. All tested samples showed high barrier properties because both the gas diffusion rate coefficient and the permeability coefficient reached low values. Both unfilled and filled IIR vulcanizates retained chemical resistance in contact with methanol for 480 min. Hour-long contact of a polar solvent (methanol) with each of the vulcanizates did not cause material degradation, while the presence of a non-polar solvent (n-heptane) worsened the mechanical parameters by up to 80%. However, the presence of fillers reduced the chemical degradation of vulcanizates (in the case of cured IIR filled with Arsil and halloysite tubes by 40% compared to the composite without fillers).
ABSTRACT
In the original publication [...].
ABSTRACT
The purpose of this paper was to examine the possibility of producing new blends of hydrogenated acrylonitrile-butadiene and chloroprene rubbers (HNBR/CR) unconventionally cross-linked with silver(I) oxide (Ag2O), and to investigate the physicomechanical properties of the obtained materials. From the obtained results, it can be concluded that HNBR/CR composites were effectively cured with Ag2O, which led to interelastomer reactions, and the degree of binding of HNBR with CR was in the range of 14-59%. The rheometric and equilibrium swelling studies revealed that the cross-linking progress depended on the weight proportion of both elastomers, and the degree of cross-linking was greater with more content of chloroprene rubber in the tested blends. Interelastomer reactions occurring between HNBR and CR improved the homogeneity and miscibility of the tested compositions, which was confirmed by differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) analyses. The tensile strength and hardness of the obtained HNBR/CR/Ag2O vulcanizates proportionally increased with the content of CR, while the tear strength showed an inverse relationship. The obtained new, unconventional materials were characterized by significant resistance to thermo-oxidative factors, which was confirmed by the high aging factor.
ABSTRACT
This paper discusses the cross-linking behaviors, mechanical and dynamical properties, and flammability of elastomeric composites containing unconventionally cured chlorosulfonated polyethylene (CSM). The purpose of this work was to verify the CSM ability to cross-link with iron(II,III) oxide (Fe3O4) and to produce flame retardant materials. During the first series of tests, three types of CSM were used, differing in the content of bound chlorine (29-43%). The results showed that the CSM with 43% bound chlorine (Hypalon 30, CSM43) was the most advantageous type of chlorosulfonated polyethylene in terms of its properties. It exhibited a short vulcanization time, a high degree of cross-linking, and very good mechanical properties. In the next stage, the CSM composites with various fillers (talc, arsil, kaolin, chalcedonite, or carbon black) were prepared, because filled rubber materials are of the greatest practical importance. The cross-linking kinetics, equilibrium swelling, mechanical and dynamic properties as well as flammability were studied. It was found that the addition of fillers led to a decrease in the degree of cross-linking, an increase in the vulcanization time (in the case of talc, arsil, or kaolin), an increase in the overall mechanical strength (in the case of carbon black, arsil or talc). All filled vulcanizates proved to be non-flammable, as the specific oxygen index value exceeded 37.5%.
