Time-dependent extracellular matrix alterations of young tendons in response to stress relaxation: a model for the Ponseti method.

The Ponseti method corrects a clubfoot by manipulation and casting which causes stress relaxation on the tendons. Here, we examined the effect of long-term stress relaxation on tendon extracellular matrix (ECM) by (1) an ex vivo stress relaxation test, (2) an in vitro tenocyte culture with stress relaxation and (3) an in vivo rabbit study. Time-dependent tendon lengthening and ECM alterations including crimp angle reduction and cleaved elastin were observed, which illustrated the mechanism of tissue lengthening behind the treatment-a material-based crimp angle reduction resulted from elastin cleavage. Additionally, in vitro and in vivo results observed restoration of these ECM alterations along with increased elastin level after 7 days of treatment, and the existence of neovascularization and inflammation, indicating the recovery and adaptation from the tendon in reaction to the treatment. Overall, this study provides the scientific background and information that helps explain the Ponseti method.

Spectral broadening scheme for suppressing SBS effects based on time-domain optimized chirp-like signals.

We propose a novel (to our knowledge) driving scheme to suppress the stimulated Brillouin scattering (SBS) effect in master oscillator power amplification (MOPA) systems based on an external high-order phase modulation. Since seed sources with the linear chirp can uniformly broaden the SBS gain spectrum with a high SBS threshold, a chirp-like signal was designed by applying further editing and processing to the piecewise parabolic signal. Compared with the traditional piecewise parabolic signal, the chirp-like signal has similar linear chirp characteristics and can reduce the driving power and sampling rate requirements, enabling more efficient spectral spreading. The SBS threshold model is constructed theoretically based on the three-wave coupling equation. The spectrum modulated by the chirp-like signal is compared with the flat-top and Gaussian spectra in terms of the SBS threshold and the bandwidth-distribution normalized threshold, and a considerable improvement is demonstrated. Meanwhile, the experimental validation is carried out in a watt-class amplifier based on the MOPA structure. At a 3 dB bandwidth of ∼10 GHz, the SBS threshold of the seed source modulated by the chirp-like signal is improved by 35% compared to the flat-top spectrum and 18% compared to the Gaussian spectrum, respectively, and the normalized threshold is also the highest among them. Our study shows that the SBS suppression effect is not only related to the power distribution of the spectrum but also can be improved by the time domain design, which provides a new idea for analyzing and improving the SBS threshold of narrow-linewidth fiber lasers.

Enhancing cybersecurity situation awareness through visualization: A USB data exfiltration case study.

Employees who have legitimate access to an organization's data may occasionally put sensitive corporate data at risk, either carelessly or maliciously. Ideally, potential breaches should be detected as soon as they occur, but in practice there may be delays, because human analysts are not able to recognize data exfiltration behaviors quickly enough with the tools available to them. Visualization may improve cybersecurity situation awareness. In this paper, we present a dashboard application for investigating file activity, as a way to improve situation awareness. We developed this dashboard for a wide range of stakeholders within a large financial services company. Cybersecurity experts/analysts, data owners, team leaders/managers, high level administrators, and other investigators all provided input to its design. The use of a co-design approach helped to create trust between users and the new visualization tools, which were built to be compatible with existing work processes. We discuss the user-centered design process that informed the development of the dashboard, and the functionality of its three inter-operable monitoring dashboards. In this case three dashboards were developed covering high-level overview, file volume/type comparison, and individual activity, but the appropriate number and type of dashboards to use will likely vary according to the nature of the detection task). We also present two use cases with usability results and preliminary usage data. The results presented examined the amount of use that the dashboards received as well as measures obtained using the Technology Acceptance Model (TAM). We also report user comments about the dashboards and how to improve them.

Mechanochemical Adhesion and Plasticity in Multifiber Hydrogel Networks.

The extracellular matrix (ECM) has force-responsive (i.e., mechanochemical) properties that enable adaptation to mechanical loading through changes in fibrous network structure and interfiber bonding. Imparting such properties into synthetic fibrous materials will allow reinforcement under mechanical load, the potential for material self-adhesion, and the general mimicking of ECM. Multifiber hydrogel networks are developed through the electrospinning of multiple fibrous hydrogel populations, where fibers contain complementary chemical moieties (e.g., aldehyde and hydrazide groups) that form covalent bonds within minutes when brought into contact under mechanical load. These fiber interactions lead to microscale anisotropy, as well as increased material stiffness and plastic deformation. Macroscale structures (e.g., tubes and layered scaffolds) are fabricated from these materials through interfiber bonding and adhesion when placed into contact while maintaining a microscale fibrous architecture. The design principles for engineering plasticity described can be applied to numerous material systems to introduce unique properties, from textiles to biomedical applications.

An Analysis of the Mechanical Properties of the Ponseti Method in Clubfoot Treatment.

Congenital clubfoot is a complex pediatric foot deformity, occurring in approximately 1 in 1000 live births and resulting in significant disability, deformity, and pain if left untreated. The Ponseti method of manipulation is widely recognized as the gold standard treatment for congenital clubfoot; however, its mechanical aspects have not yet been fully explored. During the multiple manipulation-casting cycles, the tendons and ligaments on the medial and posterior aspect of the foot and ankle, which are identified as the rate-limiting tissues, usually undergo weekly sequential stretches, with a plaster of Paris cast applied after the stretch to maintain the length gained. This triggers extracellular matrix remodeling and tissue growth, but due to the viscoelastic properties of tendons and ligaments, the initial strain size, rate, and loading history will affect the relaxation behavior and mechanical strength of the tissue. To increase the efficiency of the Ponseti treatment, we discuss the theoretical possibilities of decreasing the size of the strain step and interval of casting and/or increasing the overall number of casts. This modification may provide more tensile stimuli, allow more time for remodeling, and preserve the mechanical integrity of the soft tissues.

Engineered Fibrous Networks To Investigate the Influence of Fiber Mechanics on Myofibroblast Differentiation.

Tissue fibrosis is a leading cause of mortality and is characterized by excessive protein deposition and altered tissue mechanical properties. In pathological fibrosis, as well as cancer related fibrosis, tissue pericytes and fibroblasts transition from a quiescent to a myofibroblastic phenotype. In vitro models are needed to better understand how these cells are influenced by their local microenvironment. Here, we developed a fibrous network platform to mimic the structure of the extracellular matrix, where fibers consist of cross-linked hyaluronic acid hydrogels with controlled cross-link density and mechanical properties. As a model myofibroblast precursor, primary hepatic stellate cells were seeded onto fibers with either low (soft) or high (stiff) cross-link density, either directly after isolation (quiescent) or following preculture on tissue culture plates (activated). In general, both quiescent and activated cells showed an increase in spreading, alpha smooth muscle actin expression, and the formation of multicellular clusters on soft fibers when compared to stiff fibers. Further, inhibition of alpha smooth muscle actin decreased activation of cells on soft fibers. This is likely due to fiber recruitment in soft fibers that increased local fiber density, whereas stiff fibers resisted recruitment. This work emphasizes the importance of substrate topography on cell-material interactions and shows that tunable fibrous hydrogels are a relevant culture platform for studying fibrosis and mechanotransduction in disease.

Functional Studies of Anodic Oxidized ß-Ti-28Nb-11Ta-8Zr Alloy for Mechanical, In-vitro and Antibacterial Capability.

We developed an osseocompatible ß-type Ti-28Nb-11Ta-8Zr (TNTZ) alloy that displays the excellent elastic modulus, cellular response, corrosion resistance and antibacterial capability demanded for bone-mimetic materials. The TNTZ alloy exhibited an elastic modulus of 49 GPa, which approximates that of human bones and prevent stress shielding effects. A further anodic oxidation and subsequent post-annealing modification formed a crystalline nanoporous TNTZ oxide layer (NPTNTZO(c)) on the alloy surface, potentially promoting interlocking with the extracellular matrix of bone cells and cell proliferation. Osteoblast viability tests also verified that NPTNTZO(c) enhanced cell growth more significantly than that of flat TNTZ. In addition, potentiodynamic polarization tests in Hanks' balanced salt solution (HBSS) revealed that both TNTZ and NPTNTZO(c) exhibited better corrosion resistance than commercial pure titanium. Finally, NPTNTZO(c) reinforced with silver nanoparticles (NPTNTZO

Dewetting of polymer thin films on modified curved surfaces: preparation of polymer nanoparticles with asymmetric shapes by anodic aluminum oxide templates.

We study the dewetting behaviors of poly(methyl methacrylate) (PMMA) thin films coated in the cylindrical nanopores of anodic aluminum oxide (AAO) templates by thermal annealing. Self-assembled monolayers (SAMs) of n-octadecyltrichlorosilane (ODTS) are introduced to modify the pore surfaces of the AAO templates to induce the dewetting process. By using scanning electron microscopy (SEM), the dewetting-induced morphology transformation from the PMMA thin films to PMMA nanoparticles with asymmetric shapes can be observed. The sizes of the PMMA nanoparticles can be controlled by the original PMMA solution concentrations. The dewetting phenomena on the modified nanopores are explained by taking into account the excess intermolecular interaction free energy (ΔG). This work opens a new possibility for creating polymer nanoparticles with asymmetric shapes in confined geometries.

Controlled self-assemblies of polystyrene-block-polydimethylsiloxane micelles in cylindrical confinement through a micelle solution wetting method and Rayleigh-instability-driven transformation.

Block copolymer micelles have been extensively discussed for many decades because of their applications, such as lithography and drug delivery. However, controlling the morphologies of nanostructure assembly using block copolymer micelles as building elements remains a great challenge. In this work, we developed a novel route to induce micelle assembly in confined geometries. Polystyrene-block-polydimethylsiloxane (PS-b-PDMS) micelle solutions were used to prepare micelle nanostructures, and the critical parameters affecting the morphologies were determined. Micelle nanorods, micelle nanospheres, and multi-component nanopeapods were prepared by wetting anodic aluminum oxide (AAO) templates with micelle solutions. Rayleigh-instability-driven transformation was discovered to play an important role in controlling the morphologies of the micelle nanostructures. This study not only proposes a versatile approach to preparing block copolymer micelle nanostructures, but it also provides deeper insight into the controlling factors of block copolymer micelle morphologies in cylindrical confinement.

Shaping the Light: The Key Factors Affecting the Photophysical Properties of Fluorescent Polymer Nanostructures.

To manipulate the functions of nanomaterials more precisely for diverse applications, the controllability and critical influencing factors of their properties must be thoroughly investigated. In this work, the macroscopic and microscopic effects are studied on the photophysical properties of various pyrene-ended poly(styrene-block-methyl methacrylate) nanostructures. Fluorescent polymer nanospheres, nanorods, and nanotubes are prepared by different template-based methods using anodic aluminum oxide membranes. Chain arrangements and conformations are determined as the key factors affecting the photophysical properties of the fluorescent polymer nanostructures. This work not only gives a deeper understanding of the effects on the photophysical properties of polymer nanomaterials influenced by morphologies, chain arrangements, and chain conformations, but also provides a reference for designing proper fluorescent nanostructures for specific applications.

[Abundance of Toxic and Non-toxic Microcystis sp. in Lake Hongze and Its Correlation with Environmental Factors].

In the present study, the eutrophic level of 30 water samples collected from Lake hongze in August 2014 were analyzed, and the abundance of toxic and non-toxic Microcystis sp., together with their spatial distribution, was investigated by quantitative real-time PCR techniques. The results showed that the average concentrations of total nitrogen and total phosphorus were 1.63 and 0.11 mg x L(-1), respectively. The trophic state index ( TSI) ranged from 58.1 to 73.6, and the water quality was in the state of eutrophication based on TSI. Toxic Microcystis was widely distributed in Lake Hongze, and its abundance varied sharply, from 1. 13 x 10(4) to 3.51 x 10(6) copies x mL(-1), and the abundance of total Microcystis ranged from 1.06 x 10(5) to 1.10 x 10(7) copies x m(-1), meanwhile, the proportion of toxic Microcystis in the total Microcystis ranged from 8.5% to 38.5%, with the average value of 23.6%. Correlation analysis indicated that there was a significant positive correlation among total Mirocystis, toxic Microcystis and the toxic proportion (P < 0.01). The abundance of total and toxic Microcystis was significantly positively correlated to chlorophyll a ( Chl-a) concentrations and TSI (P < 0.01), but was negatively correlated to transparency (SD) (P < 0.01). The ratio of toxic Microcystis to total Microcystis was significantly positively correlated to Chl-a, TN, TP and TSI (P < 0.01), but significantly negatively correlated to the ratio of TN to TP and SD (P < 0.01). Therefore, reducing total nitrogen and phosphorus concentrations could not only lower the eutrophication level of Lake Hongze, but also inhibit the competition advantage of the toxic Microcystis over non-toxic Microcystis.

Selective Template Wetting Routes to Hierarchical Polymer Films: Polymer Nanotubes from Phase-Separated Films via Solvent Annealing.

We demonstrate a novel wetting method to prepare hierarchical polymer films with polymer nanotubes on selective regions. This strategy is based on the selective wetting abilities of polymer chains, annealed in different solvent vapors, into the nanopores of porous templates. Phase-separated films of polystyrene (PS) and poly(methyl methacrylate) (PMMA), two commonly used polymers, are prepared as a model system. After anodic aluminum oxide (AAO) templates are placed on the films, the samples are annealed in vapors of acetic acid, in which the PMMA chains are swollen and wet the nanopores of the AAO templates selectively. As a result, hierarchical polymer films containing PMMA nanotubes can be obtained after the AAO templates are removed. The distribution of the PMMA nanotubes of the hierarchical polymer films can also be controlled by changing the compositions of the polymer blends. This work not only presents a novel method to fabricate hierarchical polymer films with polymer nanotubes on selective regions, but also gives a deeper understanding in the selective wetting ability of polymer chains in solvent vapors.

Fabrication of Electrospun Polymer Fibers with Nonspherical Cross-Sections Using a Nanopressing Technique.

The fabrication of electrospun polymer fibers is demonstrated with anisotropic cross-sections by applying a simple pressing method. Electrospun polystyrene or poly(methyl methacrylate) fibers are pressed by flat or patterned substrates while the samples are annealed at elevated temperatures. The shapes and morphologies of the pressed polymer fibers are controlled by the experimental conditions such as the pressing force, the pressing temperature, the pressing time, and the surface pattern of the substrate. At the same pressing force, the shape changes of the polymer fibers can be controlled by the pressing time. For shorter pressing times, the deformation process is dominated by the effect of pressing and fibers with barrel-shaped cross-sections can be generated. For longer pressing times, the effect of wetting becomes more important and fibers with dumbbell-shaped cross-sections can be obtained. Hierarchical polymer fibers with nanorods are fabricated by pressing the fibers with porous anodic aluminum oxide templates.

Levo-tetrahydropalmatine attenuates mouse blood-brain barrier injury induced by focal cerebral ischemia and reperfusion: Involvement of Src kinase.

The restoration of blood flow following thrombolytic therapy causes ischemia and reperfusion (I/R) injury leading to blood-brain barrier (BBB) disruption and subsequent brain edema in patients of ischemic stroke. Levo-tetrahydropalmatine (l-THP) occurs in Corydalis genus and some other plants. However, whether l-THP exerts protective role on BBB disruption following cerebral I/R remains unclear. Male C57BL/6N mice (23 to 28 g) were subjected to 90 min middle cerebral artery occlusion, followed by reperfusion for 24 h. l-THP (10, 20, 40 mg/kg) was administrated by gavage 60 min before ischemia. We found I/R evoked Evans blue extravasation, albumin leakage, brain water content increase, cerebral blood flow decrease, cerebral infarction and neurological deficits, all of which were attenuated by l-THP treatment. Meanwhile, l-THP inhibited tight junction (TJ) proteins down-expression, Src kinase phosphorylation, matrix metalloproteinases-2/9 (MMP-2/9) and caveolin-1 activation. In addition, surface plasmon resonance revealed binding of l-THP to Src kinase with high affinity. Then we found Src kinase inhibitor PP2 could attenuate Evans blue dye extravasation and inhibit the caveolin-1, MMP-9 activation, occludin down-expression after I/R, respectively. In conclusion, l-THP attenuated BBB injury and brain edema, which were correlated with inhibiting the Src kinase phosphorylation.

Fabrication of multicomponent polymer nanostructures containing PMMA shells and encapsulated PS nanospheres in the nanopores of anodic aluminum oxide templates.

Multi-component polymer nanomaterials have attracted great attention because of their applications in areas such as biomedicine, tissue engineering, and organic solar cells. The precise control over the morphologies of multi-component polymer nanomaterials, however, is still a great challenge. In this work, the fabrication of poly(methyl methacrylate)(PMMA)/poly-styrene (PS) nanostructures that contain PMMA shells and encapsulated PS nanospheres is studied. The nanostructures are prepared using a triple solution wetting method with anodic aluminum oxide (AAO) templates. The nanopores of the templates are wetted sequentially by PS solutions in dimethylformamide (DMF), PMMA solutions in acetic acid, and water. The compositions and morphologies of the nanostructures are controlled by the interactions between the polymers, solvents, and AAO walls. This work not only presents a feasible method to prepare multi-component polymer nanomaterials, but also leads to a better understanding of polymer-solvent interactions in confined geometries.

Fabrication of Core-Shell Polymer Nanospheres in the Nanopores of Anodic Aluminum Oxide Templates Using Polymer Blend Solutions.

Spherical core-shell structures have been widely investigated in recent years, and they can be used for various applications, such as drug delivery, biological labeling, and batteries. Although many methods have been developed to prepare core-shell structures, it is still a great challenge to fabricate core-shell structures in the nanoscale with well-controlled morphologies and sizes. In this work, we present a simple method to fabricate core-shell polymer nanospheres consisting of polystyrene (PS) cores and poly(methyl methacrylate) (PMMA) shells. The nanostructures are prepared by a solution-based template wetting method. After the nanopores of anodic aluminum oxide (AAO) templates are wetted sequentially by PS/PMMA blend solutions and water, the core-shell nanostructures can be formed. The formation process is related to the Rayleigh-instability-type transformation. Selective removal techniques are also used to confirm the morphologies of the core-shell nanostructures.

Three-dimensional block copolymer nanostructures by the solvent-annealing-induced wetting in anodic aluminum oxide templates.

Block copolymers have been extensively studied over the last few decades because they can self-assemble into well-ordered nanoscale structures. The morphologies of block copolymers in confined geometries, however, are still not fully understood. In this work, the fabrication and morphologies of three-dimensional polystyrene-block-polydimethylsiloxane (PS-b-PDMS) nanostructures confined in the nanopores of anodic aluminum oxide (AAO) templates are studied. It is discovered that the block copolymers can wet the nanopores using a novel solvent-annealing-induced nanowetting in templates (SAINT) method. The unique advantage of this method is that the problem of thermal degradation can be avoided. In addition, the morphologies of PS-b-PDMS nanostructures can be controlled by changing the wetting conditions. Different solvents are used as the annealing solvent, including toluene, hexane, and a co-solvent of toluene and hexane. When the block copolymer wets the nanopores in toluene vapors, a perpendicular morphology is observed. When the block copolymer wets the nanopores in co-solvent vapors (toluene/hexane = 3:2), unusual circular and helical morphologies are obtained. These three-dimensional nanostructures can serve as naontemplates for refilling with other functional materials, such as Au, Ag, ZnO, and TiO2 .

High voltage and efficient bilayer heterojunction solar cells based on an organic-inorganic hybrid perovskite absorber with a low-cost flexible substrate.

A low temperature (<100 °C), flexible solar cell based on an organic-inorganic hybrid CH3NH3PbI3 perovskite-fullerene planar heterojunction (PHJ) is successfully demonstrated. In this manuscript, we study the effects of energy level offset between a solar absorber (organic-inorganic hybrid CH3NH3PbI3 perovskite) and the selective contact materials on the photovoltaic behaviors of the planar organometallic perovskite-fullerene heterojunction solar cells. We find that the difference between the highest occupied molecular orbital (HOMO) level of CH3NH3PbI3 perovskite and the Fermi level of indium-tin-oxide (ITO) dominates the voltage output of the device. ITO films on glass or on the polyethylene terephthalate (PET) flexible substrate with different work functions are investigated to illustrate this phenomenon. The higher work function of the PET/ITO substrate decreases the energy loss of hole transfer from the HOMO of perovskite to ITO and minimizes the energy redundancy of the photovoltage output. The devices using the high work function ITO substrate as contact material show significant open-circuit voltage enhancement (920 mV), with the power conversion efficiency of 4.54%, and these types of extra-thin planar bilayer heterojunction solar cells have the potential advantages of low-cost and lightweight.

Nanopressing: toward tailored polymer microstructures and nanostructures.

A simple and versatile method is developed for preparing anisotropic polymer particles by pressing polymer microspheres at elevated temperatures. Polystyrene (PS) microspheres are used to demonstrate this approach. Depending on the mechanical deformation and wetting of the polymers on the substrates, polymer structures with special shapes such as barrel-like or dumbbell-like shapes can be prepared. The morphology of polymer structures can be controlled by the experimental parameters such as the pressing pressure, the pressing temperature, and the pressing time. The wetting of the polymers on the substrates dominates when the samples are annealing at higher temperatures for longer times.

Curved polymer nanodiscs by wetting nanopores of anodic aluminum oxide templates with polymer nanospheres.

Although nanostructures with diverse morphologies have been fabricated, it is still a great challenge to prepare anisotropic two-dimensional (2-D) nanostructures, especially non-planar disc-like nanostructures. In this work, we develop a simple method to prepare curved polymer nanodiscs with regular sizes by wetting polymer nanospheres in the nanopores of anodic aluminum oxide (AAO) templates. Polystyrene (PS) nanospheres are first fabricated by using a non-solvent-assisted template wetting method. By annealing the PS nanospheres in the nanopores of AAO templates, curved PS nanodiscs can be produced. The length and morphology of the curved PS nanodiscs can be controlled by the wetting conditions such as the annealing temperatures and times. For some stacked nanospheres, the annealing process can result in the formation of helix-like nanostructures. To demonstrate the universality of this work, this approach is also applied to poly(methyl methacrylate) (PMMA), another common polymer, and similar results are obtained.