Construction of a BiVO4/VS-MoS2 S-scheme heterojunction for efficient photocatalytic nitrogen fixation.

Photocatalytic nitrogen (N2) reduction to ammonia (NH3), adopting H2O as the electron source, suffers from low efficiency owing to the sluggish kinetics of N2 reduction and the requirement of a substantial thermodynamic driving force. Herein, we present a straightforward approach for the construction of an S-scheme heterojunction of BiVO4/VS-MoS2 to successfully achieve photocatalytic N2 fixation, which is manufactured by coupling an N2-activation component (VS-MoS2 nanosheet) and water-oxidation module (BiVO4 nanocrystal) through electrostatic self-assembly. The VS-MoS2 nanosheet, enriched with sulfur vacancies, plays a pivotal role in facilitating N2 adsorption and activation. Additionally, the construction of the S-scheme heterojunction enhances the driving force for water oxidation and improves charge separation. Under simulated sunlight irradiation (100 mW cm-2), BiVO4/VS-MoS2 exhibits efficient photocatalytic N2 reduction activity with H2O as the proton source, yielding NH3 at a rate of 132.8 µmol g-1 h-1, nearly 7 times higher than that of pure VS-MoS2. This study serves as a noteworthy example of efficient N2 reduction to NH3 under mild conditions.

Directed Electron Delivery from a Pb-Free Halide Perovskite to a Co(II) Molecular Catalyst Boosts CO2 Photoreduction Coupled with Water Oxidation.

The development of high-performance photocatalytic systems for CO2 reduction is appealing to address energy and environmental issues, while it is challenging to avoid using toxic metals and organic sacrificial reagents. We here immobilize a family of cobalt phthalocyanine catalysts on Pb-free halide perovskite Cs2AgBiBr6 nanosheets with delicate control on the anchors of the cobalt catalysts. Among them, the molecular hybrid photocatalyst assembled by carboxyl anchors achieves the optimal performance with an electron consumption rate of 300±13 µmol g-1 h-1 for visible-light-driven CO2-to-CO conversion coupled with water oxidation to O2, over 8 times of the unmodified Cs2AgBiBr6 (36±8 µmol g-1 h-1), also far surpassing the documented systems (<150 µmol g-1 h-1). Besides the improved intrinsic activity, electrochemical, computational, ex-/in situ X-ray photoelectron and X-ray absorption spectroscopic results indicate that the electrons photogenerated at the Bi atoms of Cs2AgBiBr6 can be directionally transferred to the cobalt catalyst via the carboxyl anchors which strongly bind to the Bi atoms, substantially facilitating the interfacial electron transfer kinetics and thereby the photocatalysis.

Genetic Evidence Supporting Causal Roles of mTOR-Dependent Proteins in Rheumatic Fever: A Two-Sample Randomized Mendelian Study.

BACKGROUND: The expression of signaling molecules downstream of the mammalian target of rapamycin (mTOR) is dysregulated in patients with rheumatic fever (RF), but the causality of mTOR on RF remains unknown. This study aimed to investigate the causal effects of the mTOR-dependent proteins in RF. METHODS: The summary data for targets of the mTOR signaling were acquired from the publicly available INTERVAL study GWAS data. Data on RF have been obtained from the Integrated Epidemiology Unit GWAS database (38,209 cases and 156,711 healthy controls). A two-sample Mendelian randomization (MR) study was conducted to examine the association of RF risk and mTOR-dependent proteins (EIF4EBP2, EIF-4E, EIF-4G, EIF-4A, RP-S6K, and ATG7), including the inverse-variance weighted (IVW) method, MR-Egger, and weighted median, which was followed by sensitivity analyses. RESULTS: RP-S6K is associated with a lowered risk of RF with an odds ratio (OR) of 0.97, 95% confidence interval (95% CI) of 0.94-0.99 (p = 0.027). In contrast, ATG7 accounts for higher risk of RF with an OR of 1.05 (95% CI = 1.00-1.12, p = 0.047). No apparent heterogeneity and no horizontal pleiotropy were observed in the sensitivity analysis (p > 0.05). No statistical significance was identified for levels of EIF4A, EIF4G, EIF4E-BP2, and RP-S6K with RF risk (p > 0.05). CONCLUSION: MR found robust evidence of a causal association between RF and mTOR. RP-S6K and ATG7 may be targeted for intervention by repurposing existing therapeutics to reduce the risk of RF.

Integrated Analysis of miR-7-5p-Related ceRNA Network Reveals Potential Biomarkers for the Clinical Outcome of Gastric Cancer.

Gastric cancer (GC) is the second leading cause of tumor-associated death and the fourth most commonly seen tumor across the world. Abnormal ncRNAs have been verified to be involved in potential metastasis via modulating epithelial-to-mesenchymal transition progression and are vital for the progression of cancers. Tumor-infiltrating immune cells (TICs) are a vital indicator of whether cancer patients will benefit from immunotherapy. Nonetheless, the association between ceRNAs and immune cells remained largely unclear. We used the ceRNA network combined with TICs for the prediction of the clinical outcome of GC patients based on TCGA datasets. The percentage of immunocytes in GC was speculated by the use of CIBERSORT. Via Lasso and multivariate assays, prognostic models were established applying survival-related genes and immune cells. Nomograms were developed, and the accuracy of the nomograms was determined using calibration curves. The association between ceRNAs and TICs was validated by the use of integration analysis. In this study, there were 2219 mRNAs (1308 increased and 911 decreased), 171 lncRNAs (51 decreased and 120 increased), and 123 miRNAs (55 decreased and 68 increased) differentially expressed between tumor groups and nontumor groups. Five lncRNAs, six miRNAs, and 64 mRNAs were used for ceRNA network construction. Eight genes including LOX, SPARC, MASTL, PI15, BMPR1B, ANKRD13B, PVT1, and miR-7-5p were applied for the development of the prognostic model. Survival assays suggested that tumor cases with high risk exhibited a shorter overall survival. In addition, we included T-cell CD4 memory activated, monocytes, and neutrophils for the development of a prognosis model. Eventually, our team demonstrated the possible associations between the ceRNA prognosis model and prognostic model based on immune cells. To sum up, the ceRNA network could be used for gene regulation and predict clinical outcomes of GC patients.

Direct Z-Scheme Heterojunction of Ligand-Free FAPbBr3/α-Fe2O3 for Boosting Photocatalysis of CO2 Reduction Coupled with Water Oxidation.

Up to now, the majority of the developed photocatalytic CO2 reduction systems need to use expensive sacrificial reductants as electron source. It is still a huge challenge to drive the photocatalytic CO2 reduction using water as an electron source. Herein, we report a facile strategy for the construction of direct Z-scheme heterojunction of LF-FAPbBr3/α-Fe2O3, which is manufactured by the in situ and two-step controlled growth of ligand-free formamidinium lead bromide (LF-FAPbBr3) nanocrystals on the surface of α-Fe2O3 nanorods. The matchable energy levels and direct contact between LF-FAPbBr3 and α-Fe2O3 significantly accelerate the interfacial charge transfer, with a charge separation efficiency (ηseparation) of 93%, much higher than that of 11% shown by the ligand-capped FAPbBr3/α-Fe2O3 heterojunction. The resulting efficient separation and raised redox ability of photogenerated carriers endow the LF-FAPbBr3/α-Fe2O3 heterojunction with an outstanding photocatalytic performance for CO2 reduction (to CO and CH4) coupled with water oxidation (to O2), achieving a highest electron consumption rate of 175.0 µmol g-1 h-1 among the reported metal halide perovskite-based photocatalysts, which are 5 and 11 times higher in comparison with those of sole LF-FAPbBr3 and ligand-capped FAPbBr3/α-Fe2O3, respectively.

Glycine-Functionalized CsPbBr3 Nanocrystals for Efficient Visible-Light Photocatalysis of CO2 Reduction.

Capping ligands are indispensable for the preparation of metal-halide-perovskite (MHP) nanocrystals (NCs) with good stability; however, the long alkyl-chain capping ligands in conventional MHP NCs will be unfavorable for CO2 adsorption and hinder the efficient carrier separation on the surface of MHP NCs, leading to inferior catalytic activity in artificial photosynthesis. Herein, CsPbBr3 nanocrystals with short-chain glycine as ligand are constructed through a facile ligand-exchange strategy. Owing to the reduced hindrance of glycine and the presence of the amine group in glycine, the photogenerated carrier separation and CO2 uptake capacity are noticeably improved without compromising the stability of the MHP NCs. The CsPbBr3 nanocrystals with glycine ligands exhibit a significantly increased yield of 27.7 µmol g-1 h-1 for photocatalytic CO2 -to-CO conversion without any organic sacrificial reagents, which is over five times higher than that of control CsPbBr3 NCs with conventional long alkyl-chain capping ligands.

Ultrathin and Small-Size Graphene Oxide as an Electron Mediator for Perovskite-Based Z-Scheme System to Significantly Enhance Photocatalytic CO2 Reduction.

The judicious design of efficient electron mediators to accelerate the interfacial charge transfer in a Z-scheme system is one of the viable strategies to improve the performance of photocatalysts for artificial photosynthesis. Herein, ultrathin and small-size graphene oxide (USGO) nanosheets are constructed and employed as the electron mediator to elaborately exploit an efficient CsPbBr3 -based all-solid-state Z-scheme system in combination with α-Fe2 O3 for visible-light-driven CO2 reduction with water as the electron source. CsPbBr3 and α-Fe2 O3 can be closely anchored on USGO nanosheets, owing to the existence of interfacial strong chemical bonding behaviors, which can significantly accelerate the photogenerated carrier transfer between CsPbBr3 and α-Fe2 O3 . The resultant improved charge separation efficiency endows the Z-scheme system exhibiting a record-high electron consumption rate of 147.6 µmol g-1 h-1 for photocatalytic CO2 -to-CO conversion concomitant with stoichiometric O2 from water oxidation, which is over 19 and 12 times higher than that of pristine CsPbBr3 nanocrystals and the mixture of CsPbBr3 and α-Fe2 O3 , respectively. This work provides a novel and effective strategy for improving the catalytic activity of halide-perovskite-based photocatalysts, promoting their practical applications in the field of artificial photosynthesis.

A halide perovskite as a catalyst to simultaneously achieve efficient photocatalytic CO2 reduction and methanol oxidation.

A halide perovskite based photocatalyst has been demonstrated for the first time to simultaneously achieve efficient photocatalytic CO2 reduction and methanol oxidation, exhibiting an exciting yield of 1835 µmol g-1 for photocatalytic CO2-to-CO conversion. Moreover, almost stoichiometric value-added formic acid can be produced from methanol oxidation.

Water-Tolerant Lead Halide Perovskite Nanocrystals as Efficient Photocatalysts for Visible-Light-Driven CO2 Reduction in Pure Water.

Lead halide perovskite (LHP) nanocrystals have recently been actively investigated for photocatalysis, owing to their inexpensive fabrication and excellent optoelectronic properties. However, LHP nanocrystals have not been used for artificial photosynthesis in aqueous solution, owing to their high sensitivity to water. In this study, water-tolerant cobalt-doped CsPbBr3 /Cs4 PbBr6 nanocrystals have been prepared with the protection of hexafluorobutyl methacrylate. The resultant materials are employed as efficient photocatalysts for visible-light-driven CO2 reduction in pure water. The perovskite nanocrystals with 2 % cobalt doping afford an impressive overall yield of 247 µmol g-1 for photocatalytic CO2 conversion into CO and CH4 , using water as an electron source. This study represents a significant step for practical artificial photosynthesis by using LHP nanocrystals as photocatalysts in aqueous solution.

Encapsulating Perovskite Quantum Dots in Iron-Based Metal-Organic Frameworks (MOFs) for Efficient Photocatalytic CO2 Reduction.

Improving the stability of lead halide perovskite quantum dots (QDs) in a system containing water is the key for their practical application in artificial photosynthesis. Herein, we encapsulate low-cost CH3 NH3 PbI3 (MAPbI3 ) perovskite QDs in the pores of earth-abundant Fe-porphyrin based metal organic framework (MOF) PCN-221(Fex ) by a sequential deposition route, to construct a series of composite photocatalysts of MAPbI3 @PCN-221(Fex ) (x=0-1). Protected by the MOF the composite photocatalysts exhibit much improved stability in reaction systems containing water. The close contact of QDs to the Fe catalytic site in the MOF, allows the photogenerated electrons in the QDs to transfer rapidly the Fe catalytic sites to enhance the photocatalytic activity for CO2 reduction. Using water as an electron source, MAPbI3 @PCN-221(Fe0.2 ) exhibits a record-high total yield of 1559 µmol g-1 for photocatalytic CO2 reduction to CO (34 %) and CH4 (66 %), 38 times higher than that of PCN-221(Fe0.2 ) in the absence of perovskite QDs.

Engineering a CsPbBr3-based nanocomposite for efficient photocatalytic CO2 reduction: improved charge separation concomitant with increased activity sites.

Metal-halide perovskite nanocrystals have emerged as one of the promising photocatalysts in the photocatalysis field owing to their low-cost and excellent optoelectronic properties. However, this type of nanocrystals generally displays low activity in photocatalytic CO2 reduction owing to the lack of intrinsic catalytic sites and insufficient charge separation. Herein, we functionalized CsPbBr3 nanocrystals with graphitic carbon nitride, containing titanium-oxide species (TiO-CN) to develop an efficient composite catalyst system for photocatalytic CO2 reduction using water as the electron source. Compared to its congener with pristine CsPbBr3, the introduction of TiO-CN could not only increase the number of active sites, but also led to a swift interfacial charge separation between CsPbBr3 and TiO-CN due to their favorable energy-offsets and strong chemical bonding behaviors, which endowed this composite system with an obviously enhanced photocatalytic activity in the reduction of CO2 to CO with water as the sacrificial reductant. Over 3-fold and 6-fold higher activities than those of pristine CsPbBr3 nanocrystals and TiO-CN nanosheets, respectively, were observed under visible light irradiation. Our study provides an effective strategy for improving the photocatalytic activity of metal-halide perovskite nanocrystals, thus promoting their photocatalytic application in the field of artificial photosynthesis.