ABSTRACT
The ambient-pressure endstation and branchline of the Versatile Soft X-ray (VerSoX) beamline B07 at Diamond Light Source serves a very diverse user community studying heterogeneous catalysts, pharmaceuticals and biomaterials under realistic conditions, liquids and ices, and novel electronic, photonic and battery materials. The instrument facilitates studies of the near-surface chemical composition, electronic and geometric structure of a variety of samples using X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine-structure (NEXAFS) spectroscopy in the photon energy range from 170â eV to 2800â eV. The beamline provides a resolving power hν/Δ(hν) > 5000 at a photon flux > 1010â photonsâ s-1 over most of its energy range. By operating the optical elements in a low-pressure oxygen atmosphere, carbon contamination can be almost completely eliminated, which makes the beamline particularly suitable for carbon K-edge NEXAFS. The endstation can be operated at pressures up to 100â mbar, whereby XPS can be routinely performed up to 30â mbar. A selection of typical data demonstrates the capability of the instrument to analyse details of the surface composition of solid samples under ambient-pressure conditions using XPS and NEXAFS. In addition, it offers a convenient way of analysing the gas phase through X-ray absorption spectroscopy. Short XPS spectra can be measured at a time scale of tens of seconds. The shortest data acquisition times for NEXAFS are around 0.5â s per data point.
ABSTRACT
This manuscript presents the current status and technical details of the Spectroscopy Village at Diamond Light Source. The Village is formed of four beamlines: I18, B18, I20-Scanning and I20-EDE. The village provides the UK community with local access to a hard X-ray microprobe, a quick-scanning multi-purpose XAS beamline, a high-intensity beamline for X-ray absorption spectroscopy of dilute samples and X-ray emission spectroscopy, and an energy-dispersive extended X-ray absorption fine-structure beamline. The optics of B18, I20-scanning and I20-EDE are detailed; moreover, recent developments on the four beamlines, including new detector hardware and changes in acquisition software, are described.
ABSTRACT
We investigate the effect of thermally induced phase transformations on a metastable oxide alloy film, a multiphase Be(x)Zn(1-x)O (BZO), grown on Al2O3(0001) substrate for annealing temperatures in the range of 600-950 °C. A pronounced structural transition is shown together with strain relaxation and atomic redistribution in the annealed films. Increasing annealing temperature initiates out-diffusion and segregation of Be and subsequent nucleation of nanoparticles at the surface, corresponding to a monotonic decrease in the lattice phonon energies and band gap energy of the films. Infrared reflectance simulations identify a highly conductive ZnO interface layer (thicknesses in the range of ≈ 10-29 nm for annealing temperatures ≥ 800 °C). The highly degenerate interface layers with temperature-independent carrier concentration and mobility significantly influence the electronic and optical properties of the BZO films. A parallel conduction model is employed to determine the carrier concentration and conductivity of the bulk and interface regions. The density-of-states-averaged effective mass of the conduction electrons for the interfaces is calculated to be in the range of 0.31 m0 and 0.67 m0. A conductivity as high as 1.4 × 10(3) S · cm(-1) is attained, corresponding to the carrier concentration n(Int) = 2.16 × 10(20) cm(-3) at the interface layers, and comparable to the highest conductivities achieved in highly doped ZnO. The origin of such a nanoscale degenerate interface layer is attributed to the counter-diffusion of Be and Zn, rendering a high accumulation of Zn interstitials and a giant reduction of charge-compensating defects. These observations provide a broad understanding of the thermodynamics and phase transformations in Be(x)Zn(1-x)O alloys for the application of highly conductive and transparent oxide-based devices and fabrication of their alloy nanostructures.
ABSTRACT
Molecular beam epitaxial growth of ferromagnetic MnSb(0001) has been achieved on high quality, fully relaxed Ge(111)/Si(111) virtual substrates grown by reduced pressure chemical vapor deposition. The epilayers were characterized using reflection high energy electron diffraction, synchrotron hard X-ray diffraction, X-ray photoemission spectroscopy, and magnetometry. The surface reconstructions, magnetic properties, crystalline quality, and strain relaxation behavior of the MnSb films are similar to those of MnSb grown on GaAs(111). In contrast to GaAs substrates, segregation of substrate atoms through the MnSb film does not occur, and alternative polymorphs of MnSb are absent.
