Vehicle front-end geometry and in-depth pedestrian injury outcomes.

OBJECTIVE: Large passenger vehicles have consistently demonstrated an outsized injury risk to pedestrians they strike, particularly those with tall, blunt front ends. However, the specific injuries suffered by pedestrians in these crashes as well as the mechanics of those injuries remain unclear. The current study was conducted to explore how a variety of vehicle measurements affect pedestrian injury outcomes using crash reconstruction and detailed injury attribution. METHODS: We analyzed 121 pedestrian crashes together with a set of vehicle measurements for each crash: hood leading edge height, bumper lead angle, hood length, hood angle, and windshield angle. RESULTS: Consistent with past research, having a higher hood leading edge height increased pedestrian injury severity, especially among vehicles with blunt front ends. The poor crash outcomes associated with these vehicles stem from greater injury risk and severity to the torso and hip from these vehicles' front ends and a tendency for them to throw pedestrians forward after impact. CONCLUSIONS: The combination of vehicle height and a steep bumper lead angle may explain the elevated pedestrian crash severity typically observed among large vehicles.

Comparison of frontal crash compatibility metrics between battery-electric and internal-combustion-engine passenger vehicles.

OBJECTIVE: The objective of this study was to determine if there are any emerging issues related to battery-electric vehicles' (BEVs') geometry, force distribution, and extra weight that may make them more aggressive partners in front-to-front crashes through comparisons of stiffness metrics derived from crash tests. METHODS: We examined load cell wall data from the National Highway Traffic Safety Administration's (NHTSA's) New Car Assessment Program full-width frontal crash test at 56 km/h. Fourteen BEVs, ranging in class from small cars to large SUVs, were compared with 92 internal-combustion-engine (ICE) vehicles, ranging in class from small cars to midsize pickups. We selected vehicles based on the test results available in the NHTSA Vehicle Crash Test Database, and there were no tests of battery-electric (BE) pickups. Data included load-cell-wall force-time histories and longitudinal vehicle acceleration from the body structure. We constructed force-displacement diagrams and calculated static, dynamic, energy-equivalent, and initial front-end-stiffness metrics from load cell wall forces, vehicle acceleration, and static front-end crush measurements for each vehicle. Linear regression models were applied to the metrics for comparison between powertrains. RESULTS: BE cars and BE SUVs weighed more than their ICE counterparts, on average 369 kg and 286 kg more, respectively. Initial (200 mm and 400 mm), energy-equivalent and dynamic front-end-stiffness metrics, average height of force, and individual maximum forces, when compared with vehicle shadow, were not statistically different between powertrains. Static stiffness (p = 0.04) and initial stiffness (300 mm; p = 0.05) decreased for BEVs with greater shadow and increased with greater shadow for ICE vehicles. When controlling for vehicle shadow, dynamic crush was greater (p = 0.01), the percentage of center force was lower (p < 0.001), and maximum peak force was higher (p = 0.01) for BEVs compared with ICE vehicles. For the Kia Niro BEV and ICE pair, the 329 kg heavier BEV had a 165 mm longer crush distance, which resulted in lower forces and stiffness metrics compared with the traditional ICE counterpart. CONCLUSION: Overall, this study indicates that current BEVs are not excessively aggressive in terms of stiffness metrics for frontal crash compatibility compared with ICE vehicles.

Bicyclist crashes with cars and SUVs: Injury severity and risk factors.

OBJECTIVE: The popularity of bicycle travel has increased in recent years alongside a comparable increase in the risk of injury or death for those cyclists. The current study was conducted to investigate the differences in injury outcomes between bicyclists struck by SUVs and those struck by cars and to uncover the mechanisms behind injury patterns that have been observed in past research. METHODS: We analyzed 71 single-vehicle crashes from the Vulnerable Road User Injury Prevention Alliance pedestrian crash database, focusing on crashes involving an SUV or car. Each crash from this database included an in-depth analysis of police reports, bicyclist medical records, crash reconstructions, and injury attribution by a panel of experts. RESULTS: Bicyclist injuries from crashes with SUVs were more severe than those from crashes with cars, particularly with respect to head injuries. The greater injury severity associated with SUVs was related to these vehicles' tendency to produce injuries from ground contact or from vehicle components near the ground. In contrast, cars were much less likely to produce ground injuries and instead tended to distribute less severe injuries across multiple vehicle components. CONCLUSIONS: The pattern of results suggest that the size and shape of SUV front ends are responsible for the differences in bicyclist injury outcomes. In particular, we found that SUV crashes inflicted more severe head injuries compared with car crashes and that SUVs were disproportionately likely to throw bicyclists to the ground and run them over.

Developing an aluminum honeycomb barrier to represent a striking SUV in a side impact crash test.

OBJECTIVE: The Insurance Institute for Highway Safety (IIHS) introduced its side impact ratings test in 2003. Despite manufacturers' improvements to airbags and vehicle structures, 45% of 2018 side crash fatalities on U.S. roadways were in good-rated vehicles, suggesting that more crashworthiness improvements are necessary. Crash trends indicate that the most promising avenue to address the remaining real-world injuries is a higher severity vehicle-to-vehicle test using a barrier to represent a striking sport-utility vehicle (SUV). Laboratory tests comparing striking SUVs with the current IIHS moving deformable barrier (MDB) showed discrepancies in damage patterns and injury measures. The current study outlines the characteristics of a multi-stiffness aluminum honeycomb barrier to represent a modern SUV-striking vehicle in side impact crash tests. METHODS: Barrier size and shape were determined from a series of measurements taken from 21 modern SUVs. Barrier honeycomb stiffness characteristics were derived by comparing the damage profile of six different barrier prototypes against a baseline profile obtained from a high-severity SUV crash into a midsize car. Tests were conducted at 60 km/h with a 1,900 kg MDB. The best honeycomb design was tested against four additional vehicles to ensure it was representative of striking SUVs of different sizes and types. RESULTS: The final barrier has a 1,700-mm width by 600-mm height and 500-mm depth multi-stiffness design, with less stiffness on the top and more stiffness in the lower outside sections compared with the original IIHS barrier. For three struck vehicles, the redesigned barrier matched all performance criteria set by the striking-SUV tests. For two additional struck vehicles, there were some differences in intrusion patterns but overall, these matched the test trends of the striking SUVs. The new barrier in a higher severity test mode resulted in a range of performance for these good-rated vehicles. CONCLUSION: A multi-stiffness aluminum honeycomb barrier was developed to represent the characteristics of striking SUVs in 60 km/h perpendicular side impact crash tests focusing on the occupant compartment. The redesigned barrier differentiates between currently good-rated vehicles, which will promote structural and restraint system improvements to the fleet relevant to the remaining real-world injuries.

Pedestrian injuries from cars and SUVs: Updated crash outcomes from the vulnerable road user injury prevention alliance (VIPA).

OBJECTIVE: The current short communication was written to update research on real-world pedestrian crashes. In particular, our analysis offers a preliminary update on SUV-pedestrian crash outcomes and how they differ from car-pedestrian crash outcomes. Detailed injury data were linked to vehicle features to offer a better understanding of pedestrian injury etiology. METHODS: We analyzed 82 single-vehicle crashes from the VIPA pedestrian crash database, focusing on crashes involving an SUV or car. Each crash from this database includes an in-depth analysis of police reports, pedestrian medical records, crash reconstructions, and injury attribution by a panel of experts. RESULTS: SUVs remain disproportionately likely to injure and kill pedestrians compared with cars, but these differences emerged primarily at crashes of intermediate speed. Crashes at low speeds and high speeds tend to produce similar injury outcomes independent of striking vehicle type (mild and fatal, respectively). The data suggest that the elevated danger to pedestrians from SUVs in these crashes may be largely related to injuries caused by impacts with the vehicles' leading edge: the bumper, grille, and headlights. CONCLUSIONS: Although the current analysis was based on a non-nationally representative dataset, the elevated pedestrian injury risk originating from SUVs' leading edge is consistent with past research on the subject. That is, despite the changes in vehicle design and fleet composition over the past two decades, SUVs may remain disproportionately likely to injure pedestrians compared with cars.

Laboratory Reconstructions of Bicycle Helmet Damage: Investigation of Cyclist Head Impacts Using Oblique Impacts and Computed Tomography.

Although head injuries are common in cycling, exact conditions associated with cyclist head impacts are difficult to determine. Previous studies have attempted to reverse engineer cyclist head impacts by reconstructing bicycle helmet residual damage, but they have been limited by simplified damage assessment and testing. The present study seeks to enhance knowledge of cyclist head impact conditions by reconstructing helmet damage using advanced impact testing and damage quantification techniques. Damage to 18 helmets from cyclists treated in emergency departments was quantified using computed tomography and reconstructed using oblique impacts. Damage metrics were related to normal and tangential velocities from impact tests as well as peak linear accelerations (PLA) and peak rotational velocities (PRV) using case-specific regression models. Models then allowed original impact conditions and kinematics to be estimated for each case. Helmets were most frequently damaged at the front and sides, often near the rim. Concussion was the most common, non-superficial head injury. Normal velocity and PLA distributions were similar to previous studies, with median values of 3.4 m/s and 102.5 g. Associated tangential velocity and PRV medians were 3.8 m/s and 22.3 rad/s. Results can inform future oblique impact testing conditions, enabling improved helmet evaluation and design.

Development of the STAR Evaluation System for Assessing Bicycle Helmet Protective Performance.

Cycling is a leading cause of mild traumatic brain injury in the US. While bicycle helmets help protect cyclists who crash, limited biomechanical data exist differentiating helmet protective capabilities. This paper describes the development of a bicycle helmet evaluation scheme based in real-world cyclist accidents and brain injury mechanisms. Thirty helmet models were subjected to oblique impacts at six helmet locations and two impact velocities. The summation of tests for the analysis of risk (STAR) equation, which condenses helmet performance from a range of tests into a single value, was used to summarize measured linear and rotational head kinematics in the context of concussion risk. STAR values varied between helmets (10.9-25.3), with lower values representing superior protection. Road helmets produced lower STAR values than urban helmets. Helmets with slip planes produced lower STAR values than helmets without. This bicycle helmet evaluation protocol can educate consumers on the relative impact performance of various helmets and stimulate safer helmet design.

Differences in the protective capabilities of bicycle helmets in real-world and standard-specified impact scenarios.

OBJECTIVE: The purpose of this study was to investigate relative differences in impact attenuation capabilities of bicycle helmets under real-world impact conditions and safety standard-specified conditions using a standard rig. METHODS: A Consumer Product Safety Commission (CPSC) test rig was used to impact 10 helmet models of varied design. Impact configurations included 2 locations and 2 velocities. A frontal rim location (inferior to the standard-defined test area) and a temporal location were selected to reflect common cyclist impacts. An impact velocity of 3.4 m/s, an average normal impact velocity in cyclist accidents, was selected, as well as the CPSC standard velocity of 6.2 m/s. Four samples per helmet model were subjected to each of the 4 impact configurations once (randomized test order per sample), resulting in 160 drop tests. Peak linear acceleration (PLA) and head injury criterion (HIC)-based Abbreviated Injury Scale (AIS) ≥ 4 brain injury risk were determined and compared across helmets and impact configurations using analysis of variance. Other impact characteristics such as duration, effective liner stiffness, and energy dissipated were also calculated from acceleration data. RESULTS: Helmet performance varied significantly between models. PLA ranged from 78 to 169 g at 3.4 m/s (0-2% AIS ≥ 4 brain injury risk) and 165-432 g (10-100% risk) at 6.2 m/s. Temporal impacts resulted in higher PLAs than frontal impacts, likely due to increased effective liner stiffness. However, 2 helmets exceeded the CPSC pass-fail threshold (300 g) at the frontal rim location, producing >70% risk. Force-displacement curves suggest that bottoming-out occurred in these impacts. Aside from bottoming-out cases, helmets that performed worse in one impact configuration tended to perform worse in others, with non-road-style helmets among the worst. CONCLUSIONS: The 10 bicycle helmets tested produced considerable differences in their protective capabilities under both real-world and standard-specified conditions on the CPSC rig. Risk of severe brain injury varied widely between helmets at the standard impact velocity, whereas the common, lower severity impacts produced PLAs associated with concussion. Helmets of a nonroad style generally performed worse across configuration. The temporal location produced higher risks for most helmets, although some helmets were found to offer inadequate protection at the helmet rim. Because this is a commonly impacted location in cyclist accidents, there may be benefit to expanding the testable area in standards to include the rim. Results from this study demonstrate the value in testing nonstandard conditions and can be used to inform standards testing and helmet design.

Occurrence of serious injury in real-world side impacts of vehicles with good side-impact protection ratings.

OBJECTIVE: The Insurance Institute for Highway Safety (IIHS) introduced its side impact consumer information test program in 2003. Since that time, side airbags and structural improvements have been implemented across the fleet and the proportion of good ratings has increased to 93% of 2012-2014 model year vehicles. Research has shown that drivers of good-rated vehicles are 70% less likely to die in a left-side crash than drivers of poor-rated vehicles. Despite these improvements, side impact fatalities accounted for about one quarter of passenger vehicle occupant fatalities in 2012. This study is a detailed analysis of real-world cases with serious injury resulting from side crashes of vehicles with good ratings in the IIHS side impact test. METHODS: NASS-CDS and Crash Injury Research and Engineering Network (CIREN) were queried for occupants of good-rated vehicles who sustained an Abbreviated Injury Scale (AIS) ≥ 3 injury in a side-impact crash. The resulting 110 cases were categorized by impact configuration and other factors that contributed to injury. Patterns of impact configuration, restraint performance, and occupant injury were identified and discussed in the context of potential upgrades to the current IIHS side impact test. RESULTS: Three quarters of the injured occupants were involved in near-side impacts. For these occupants, the most common factors contributing to injury were crash severities greater than the IIHS test, inadequate side-airbag performance, and lack of side-airbag coverage for the injured body region. In the cases where an airbag was present but did not prevent the injury, occupants were often exposed to loading centered farther forward on the vehicle than in the IIHS test. Around 40% of the far-side occupants were injured from contact with the struck-side interior structure, and almost all of these cases were more severe than the IIHS test. The remaining far-side occupants were mostly elderly and sustained injury from the center console, instrument panel, or seat belt. In addition, many far-side occupants were likely out of position due to events preceding the side impact and/or being unbelted. CONCLUSION: Individual changes to the IIHS side impact test have the potential to reduce the number of serious injuries in real-world crashes. These include impacting the vehicle farther forward (relevant to 28% of all cases studied), greater test severity (17%), the inclusion of far-side occupants (9%), and more restrictive injury criteria (9%). Combinations of these changes could be more effective.

Structural Design Strategies for Improved Small Overlap Crashworthiness Performance.

In 2012, the Insurance Institute for Highway Safety (IIHS) began a 64 km/h small overlap frontal crash test consumer information test program. Thirteen automakers already have redesigned models to improve test performance. One or more distinct strategies are evident in these redesigns: reinforcement of the occupant compartment, use of energy-absorbing fender structures, and the addition of engagement structures to induce vehicle lateral translation. Each strategy influences vehicle kinematics, posing additional challenges for the restraint systems. The objective of this two-part study was to examine how vehicles were modified to improve small overlap test performance and then to examine how these modifications affect dummy response and restraint system performance. Among eight models tested before and after design changes, occupant compartment intrusion reductions ranged from 6 cm to 45 cm, with the highest reductions observed in models with the largest number of modifications. All redesigns included additional occupant compartment reinforcement, one-third added structures to engage the barrier, and two modified a shotgun load path. Designs with engagement structures produced greater glance-off from the barrier and exhibited lower delta Vs but experienced more lateral outboard motion of the dummy. Designs with heavy reinforcement of the occupant compartment had higher vehicle accelerations and delta V. In three cases, these apparent trade-offs were not well addressed by concurrent changes in restraint systems and resulted in increased injury risk compared with the original tests. Among the 36 models tested after design changes, the extent of design changes correlated to structural performance. Half of the vehicles with the lowest intrusion levels incorporated aspects of all three design strategies. Vehicle kinematics and dummy and restraint system characteristics were similar to those observed in the before/after pairs. Different combinations of structural improvement strategies for improving small overlap test performance were found to be effective in reducing occupant compartment intrusion and improving dummy kinematics in the IIHS small overlap test with modest weight increase.

Development of a frontal small overlap crashworthiness evaluation test.

OBJECTIVES: Small overlap frontal crashes are those in which crash forces are applied outboard of the vehicle's longitudinal frame rails. In-depth analyses of crashes indicate that such crashes account for a significant proportion of frontal crashes with seriously injured occupants. The objective of this research was to evaluate possible barrier crash tests that could be used to evaluate the crashworthiness of vehicles across a spectrum of small overlap crash types. METHODS: Sixteen full-scale vehicle tests were conducted using 3 midsize passenger vehicles in up to 6 different test configurations, including vehicle-to-vehicle and barrier tests. All vehicles were tested at 64 km/h with an instrumented Hybrid III midsize male driver dummy. RESULTS: All test configurations resulted in primary loading of the wheel, suspension system, and hinge pillar. Vehicles underwent substantial lateral movement during the crash, which varied by crash configuration. The occupant compartments had significant intrusion, particularly to the most outboard structures. Inboard movement of the steering wheel in combination with outboard movement of the dummies (due to the lateral vehicle motion) caused limited interaction with the frontal air bag in most cases. CONCLUSIONS: When assessing overall crashworthiness (based on injury measures, structural deformation, and occupant kinematics), one vehicle had superior performance in each crash configuration. This was confirmation that the countermeasures benefiting performance in a single small overlap test also will provide a benefit in other crash configurations. Based on these test results, the Insurance Institute for Highway Safety has developed a small overlap crashworthiness evaluation with the following characteristics: a rigid flat barrier with a 150-mm corner radius, 25 percent overlap, 64 km/h test speed, and a Hybrid III midsize male driver dummy.

Comparison of Hybrid III and THOR dummies in paired small overlap tests.

The Insurance Institute for Highway Safety (IIHS) is investigating small overlap crash test procedures for a possible consumer information program. Analysis of real-world small overlap crashes found a strong relationship between serious head and chest injuries and occupant compartment intrusion. The main sources of serious head injuries were from the A-pillar, dash panel, or door structure, suggesting head trajectories forward and outboard possibly bypassing the airbag. Chest injuries mainly were from steering wheel intrusion and seat belt loading. In developing this program, two test dummies were evaluated for predicting occupant injury risk: midsize male Hybrid III and THOR. In the collinear small overlap crash tests conducted here, results from the two dummies were similar. Both predicted a low risk of injury to the head and chest and sometimes a high risk of injury to the lower extremities. Head and torso kinematics also were similar between dummies. Other test scenarios might show larger differences between the dummies.