Modified volar approach for proximal row carpectomy.

Objectives: Proximal row carpectomy is a well-accepted surgical procedure for the management of traumatic and degenerative wrist pathologies. It is routinely performed through a dorsal approach; a volar surgical access was presented in order to enable concomitant carpal tunnel release and avoid flexion limitation or disabilities caused by adhesions of the dorsal capsule and extensor tendons. We propose a modification to the volar approach, with detailed description of skin incision (reproducing the standard palmar access to the scaphoid), capsular section (beginning with a longitudinal cut radial to flexor carpi radialis tendon and prolonged transversally along the radio-lunate joint) and sequence of carpal bone removal (starting with the scaphoid rather than the lunate). Materials and methods: The patients who underwent surgical treatment with modified volar proximal row carpectomy between 1992 and 2015 were enrolled in a retrospective analysis. Results: We report postoperative improvement in both the Mayo Wrist score and total active range of motion in 38 patients, in line with the outcomes of dorsal proximal row carpectomy. Conclusions: The modified volar approach is highly recommended when better visualization and access to proximal carpal bones are needed (particularly useful for inveterate perilunate dislocations), moreover if concomitant carpal tunnel syndrome or extensor tendon pathologies are present.

Reconstruction of Traumatic Dorsal Loss of the Thumb: Four Different Surgical Approaches.

BACKGROUND: This article outlines our methods for thumb reconstruction following dorsal skin loss injury located between the metacarpophalangeal joint (MPj) and the entire nail affecting skin, nail, tendon, and bone in different combinations but with intact sensate palmar skin. METHODS: Between 1990 and 2015, 24 patients were treated for dorsal thumb defects using 4 different surgical techniques. Five cases of dorsal compound traumatic loss were reconstructed by custom-made dorsal great toe transfer. Four patients with dorsal skin and nail loss located at the distal phalanx level were covered with the homodigital flap with reverse flow vascularization. In 9 patients presenting skin defects between the MPj and the nail, reconstruction was achieved by means of the kite flap. Six cases suffered extensive dorsal skin loss, and reconstruction was performed using different types of radial forearm flaps (cutaneous, tendineocutaneous, osteocutaneous, and fascial). RESULTS: Flap survival was obtained in all cases. No vascular complications occurred with free vascularized compound toe transfer. CONCLUSIONS: Reconstruction of dorsal thumb defects is imperative and its approach is strictly correlated to type of defect, patient's requests, and flap alternatives. For defects with nail involvement, the free osteo-onychocutaneous flap harvested from the great toe provides the best aesthetic result in selected young and well-motivated patients. An alternative is represented by the dorsoulnar flap, when the defect is located distally, or the fascial pedicle radial forearm flap, for major dorsal thumb defects, in patients refusing microsurgical reconstruction. The kite flap still represents a feasible solution for medium-size defects with an intact nail.

Biomechanical comparison between stainless steel, titanium and carbon-fiber reinforced polyetheretherketone volar locking plates for distal radius fractures.

INTRODUCTION: As the popularity of volar locked plate fixation for distal radius fractures has increased, so have the number and variety of implants, including variations in plate design, the size and angle of the screws, the locking screw mechanism, and the material of the plates. HYPOTHESIS: Carbon-fiber reinforced polyetheretherketone (CFR-PEEK) plate features similar biomechanical properties to metallic plates, representing, therefore, an optimal alternative for the treatment of distal radius fractures. MATERIALS AND METHODS: Three different materials-composed plates were evaluated: stainless steel volar lateral column (Zimmer); titanium DVR (Hand Innovations); CFR-PEEK DiPHOS-RM (Lima Corporate). Six plates for each type were implanted in sawbones and an extra-articular rectangular osteotomy was created. Three plates for each material were tested for load to failure and bending stiffness in axial compression. Moreover, 3 constructs for each plate were evaluated after dynamically loading for 6000 cycles of fatigue. RESULTS: The mean bending stiffness pre-fatigue was significantly higher for the stainless steel plate. The titanium plate yielded the higher load to failure both pre and post fatigue. After cyclic loading, the bending stiffness increased by a mean of 24% for the stainless steel plate; 33% for the titanium; and 17% for the CFR-PEEK plate. The mean load to failure post-fatigue increased by a mean of 10% for the stainless steel and 14% for CFR-PEEK plates, whereas it decreased (-16%) for the titanium plate. Statistical analysis between groups reported significant values (p<001) for all comparisons except for Hand Innovations vs. Zimmer bending stiffness post fatigue (p=.197). DISCUSSION: The significant higher load to failure of the titanium plate, makes it indicated for patients with higher functional requirements or at higher risk of trauma in the post-operative period. The CFR-PEEK plate showed material-specific disadvantages, represented by little tolerance to plastic deformation, and lower load to failure. LEVEL OF EVIDENCE: N/A.

Comparison between absorbable pins and mini-screw fixations for the treatment of radial head fractures Mason type II-III.

BACKGROUND: The treatment of comminuted radial head fractures can include prosthetic replacement or open reduction and internal fixation. The purpose of this study is to evaluate the results of two different internal fixation systems for Mason type II-III radial head fractures. METHODS: Between 2005 and 2015, 82 patients were treated using pins and 65 patients by mini-screws. The follow-up protocol included: a clinical evaluation 15 days after surgery, and clinical and radiographic evaluations performed at 30 and 60 day intervals, unless any complications were reported by the patient. Over a period of at least 12-months of follow-up, patients were checked and interviewed. Clinical examinations included elbow range of motion (ROM), arm, shoulder and hand Disabilities, (DASH), and the Mayo Elbow Performance Score (MEPS). RESULTS: Sixty-one subjects who had been treated with mini-screws were clinically reviewed at a mean 47.3 ± 35.8 month of follow-up; all patients who had been treated using absorbable pins were evaluated at a mean 82.5 ± 20.6 month of follow-up. No significant statistically differences were observed between the two groups in the mean ROM, DASH, and MEPS scores. Residual pain was reported in 15.8%of the patients treated by pins and 9.2% patients treated by mini-screws. Secondary displacement of fracture fragments was observed in 8.5% patients treated by pins and 1.6% using mini-screws. CONCLUSIONS: Both absorbable pins and mini-screws provided adequate strength and rigidity, allowing good clinical and functional scores at a mid-term follow-up. However, a higher rate of secondary displacement of the fracture fragments was reported among subjects who had been treated using absorbable pins.

Interposition Arthroplasty Versus Hematoma and Distraction for the Treatment of Osteoarthritis of the Trapeziometacarpal Joint.

BACKGROUND: Various surgical techniques were reported with excellent result for the treatment of trapeziometacarpal joint arthritis. However, the best treatment option was not defined yet. METHODS: This randomized prospective study compared the result of two surgical techniques: tendon interposition arthroplasty (64 patients) and K. wire distraction (56 patients) after trapeziectomy for stage 3 or 4 osteoarthritis of the trapeziometacarpal joint. RESULTS: After a mean follow-up period of 6.8 (range, 3-10) years it was possible to observe a higher rate of pain relief following trapeziectomy with K. wire suspension, but no significant differences in strength, range of motion and DASH score between the two groups. On lateral unloaded radiographs the height of the space between the base of the thumb metacarpal and the scaphoid showed a mean value of 6.5 mm for both groups; the average distance between the metacarpal base and the trapezium was not statistically significant in the two groups. Complications were observed only in patients treated with trapeziectomy and interposition arthroplasty and were represented by tendinitis of the FCR in 15% of cases. CONCLUSIONS: We demonstrate that the trapezium excision and bone space distraction technique requires a smaller incision, a shorter surgical time, an easier surgical technique, and a less painful recovery, maintaining overlapping levels of functional restore.

Clinical outcome is not affected by total knee arthroplasty alignment.

PURPOSE: This study aims to analyse the influence on total knee arthroplasty (TKA) clinical outcomes of biomechanical intra-operative computer-assisted surgery-measured parameters, together with radiographic and demographical data. METHODS: Between 2007 and 2009, 227 computer-assisted surgery (CAS) primary TKAs were performed in 219 consecutive patients. Information about gender, age and body mass index (BMI) was collected for each patient. Before knee replacement, all patients underwent a complete radiographic examination and passive flexion-extension range of motion was recorded. All TKAs were implanted using an image-free knee navigation system. Patients included in the study were evaluated at 3, 6 and 12 months of follow-up and then yearly. At each follow-up, subjects were asked to answer the validated Italian version of the Knee Injury and Osteoarthritis Outcome Score. RESULTS: One hundred and eighty patients (187 knees) had data available for analysis. Complications were reported in 13 patients (7.0 %). Intra-operative CAS-measured parameters, together with age, BMI, gender, pre- and post-operative radiographic alignment, did not influence TKA clinical results at a mean 2 years of follow-up. On the other hand, higher post-operative flexion arc of movement was suggestive of better clinical outcomes. CONCLUSION: TKA clinical outcome is influenced by post-operative knee flexion, other than neutral mechanical limb alignment. Therefore, it is recommended to prefer TKA designs that allow high flexion and to encourage early physical rehabilitation. LEVEL OF EVIDENCE: IV.

Corrective osteotomies of the radius: Grafting or not?

AIM: To review the current literature regarding corrective osteotomies to provide the best evidence of the rule of bone grafting. METHODS: Our MEDLINE literature search included 280 studies using the following key words "Malunited distal radius fracture" and 150 studies using key words "Corrective osteotomy of the distal radius". Inclusion criteria were: Malunited distal radial, extra articular fracture, volar locking plate, use of iliac bone graft (cancellous or corticocancellous), non-use of bone graft. Twelve studies met the inclusion criteria. RESULTS: Seven of the 12 studies considered, described the use of a graft; the remaining five studies didn't use any graft. Type of malunion was dorsal in most of the studies. The healing time was comparable using the graft or not (mean 12.5 wk), ranging from 7.5 to 16 wk. The mean disabilities of the arm, shoulder and hand score improvement was 23 points both in the studies that used the graft and in those not using the graft. CONCLUSION: This review demonstrated that corrective osteotomy of extra-articular malunited fractures of the distal radius treated by volar locking plate does not necessarily require bone graft.

Distal triceps tendon repair using Krakow whipstitches, K wires, tension band and double drilling technique: a case report.

INTRODUCTION: The management of distal triceps tears must address each patient's medical and functional status: in general, the literature has described satisfactory nonsurgical treatment in tears less than 50%. Tears greater than 50% are treated nonsurgically in a sedentary person and surgically in active patients. Complete tears are generally managed surgically: most reported repair techniques describe the use of Bunnell or Krakow whipstitch techniques, passing the sutures through transosseous drill holes in the ulna. Other described techniques include the use of suture anchors and direct tendon repair to a periosteal flap raised from the olecranon. CASE PRESENTATION: In the presented report we describe the surgical technique used to treat a complete traumatic distal triceps tendon rupture associated with olecranon fracture in a 40-year-old Caucasian man with underlying poor tendon quality and postoperative assessment. To the best of our knowledge no studies describing the performed surgical technique, utilizing Krakow whipstitches, olecranon fixation with K wires and Zuggurtung tension band through transosseous drill holes have been previously described in the literature. At 30 days postoperatively the patient had regained full elbow flexion/extension and pronation/supination. CONCLUSIONS: The described methodology, using a double ulnar tunnel to obtain fixation of the fragment, associated with a whipstitch locking-type suture for the triceps tendon, allowed proper fixation of the fracture and optimal reinsertion of the detached tendon on its footprint with sufficient strength.

Pediatric medial epicondyle fractures with intra-articular elbow incarceration.

BACKGROUND: Intra-articular incarceration of the epicondylar fragment occurs in 5-18 % of all cases of medial epicondyle fracture. It requires stable fixation to allow early motion, since elbow stiffness is the most common complication following medial epicondyle fracture. In this retrospective study, we report the clinical and functional outcomes and the complications that occurred following open reduction and screw fixation of medial epicondyle fractures with intra-articular fragment incarceration. METHODS: Thirteen children who had a fracture of the medial epicondyle with incarceration of the fragment in the elbow joint (type III) were surgically treated in our university hospital between 1998 and 2012. There were eight male and five female patients. The mean age at the time of injury was 13 years (range 9-16). Operative treatment consisted of open reduction and internal fixation with one or two 4.0-mm cannulated screws under fluoroscopic control. RESULTS: All of the patients were clinically reviewed at an average follow-up of 29 months. The overall range of motion limitation was about 5° for flexion-extension and 2° for pronation-supination. The score was excellent in all patients (mean 96.3). Complications occurred in four (31 %) children: two cases of symptomatic screw head prominence, irritation with partial lesion of the distal triceps myotendinous junction in one patient, and median nerve entrapment syndrome in one patient. CONCLUSIONS: In conclusion, open reduction and screw fixation yielded excellent clinical and functional outcomes for the treatment of medial epicondyle fractures with intra-articular fragment incarceration. However, particular attention is should be paid when treating these potentially serious injuries in order to minimize the risk of possible complications. LEVEL OF EVIDENCE: Therapeutic IV.

In vivo kinematics of medial unicompartmental osteoarthritic knees during activities of daily living.

Few studies exist describing unicompartmental osteoarthritic knee kinematics. Moreover, the role of the anterior cruciate ligament (ACL) in the determination of knee kinematics has not been fully described. The objective of the current study was to analyze the in vivo kinematics of knees with medial osteoarthritis (OA) and intact ACL during closed and open chained motion. Eight patients scheduled for UKA diagnosed with primary medial OA underwent knee CT-scans and video-fluoroscopy. Fluoroscopic analysis included stair climbing, chair rising and leg extension. Three-dimensional bone positions were obtained from each image by iterative procedures using a CAD-model-based shape-matching technique. Patterns of axial rotation and anterior-posterior (AP) motion of the medial and lateral femoral condyle were obtained with specific software. The femur reported an overall external rotation relative to the tibia from extension to flexion in all tasks. Average AP translation of the medial femoral condyle were smaller in open-chained tasks than in weight-bearing conditions. Average AP motion of the lateral femoral condyle reported an overall posterior translation with knee flexion. The absent natural "screw-home" mechanism and the lack of medial condyle posterior translation was explained by bone-cartilage defects and meniscal degeneration. Relevant findings were the kinematic pattern differences between weight-bearing and open chained activities, suggesting that in biphasic muscle contraction and unloaded conditions, the function of the cruciate ligaments was not physiological. The kinematics of knees with medial OA and intact ACL differed from healthy knees.

Schwannomas of the upper extremity: analysis of 34 cases.

BACKGROUND: Schwannomas are the most common benign tumours developing in peripheral nerves. They usually present as a slow-growing mass, sometimes associated with pain and paraesthesia. The aim of this study is to define the correct preoperative diagnosis, to review the surgical treatment employed and to evaluate short- and long-term neurological deficits. METHODS: Thirty-four patients affected by schwannoma in the upper limbs were treated in the period 1995-2011. In 15 patients the tumour was located on the ulnar nerve, in 8 on the median nerve, in 2 on the radial nerve, in 1 on the anterior interosseous nerve, in 1 on the muscle-cutaneous nerve, and in the remaining 7 on the digital nerves. All patients were surgically treated using a microsurgical approach. RESULTS: The enucleation of the mass was possible without fascicle lesion in 12 cases. In 22 cases resection of the indissociable fascicles was performed. Postoperative paraesthesia was present in 28 out of 34 treated patients; this clinical sign regressed in a mean period of 12 months in 27 patients. CONCLUSIONS: When approaching a palpable mass in the upper limbs, the possibility of a peripheral nerve tumour should always be considered. It is important to look for typical signs of schwannomas, such as a positive Tinel sign and peripheral paraesthesia. Imaging assessment with magnetic resonance imaging (MRI) and ultrasonography enables the determination of where the tumour takes its origin and from which nerve. Microsurgical techniques and know-how are recommended in approaching the resection in order to respect as many nerve fibres as possible.

Distal biceps tendon rupture reconstruction using muscle-splitting double-incision approach.

AIM: To evaluate the clinical and functional results after repair of distal biceps tendon tears, following the Morrey's modified double-incision approach. METHODS: We retrospectively reviewed 47 patients with distal rupture of biceps brachii treated between 2003 and 2012 in our Orthopedic Department with muscle-splitting double-incision technique. Outcome measures included the Mayo elbow performance, the DASH questionnaire, patient's satisfaction, elbow and forearm motion, grip strength and complications occurrence. RESULTS: At an average 18 mo follow-up (range, 7 mo-10 years) the average Mayo elbow performance and DASH score were respectively 97.2 and 4.8. The elbow flexion range was 94%, extension was -2°, supination was 93% and pronation 96% compared with the uninjured limb. The mean grip strength, expressed as percentage of respective contralateral limb, was 83%. The average patient satisfaction rating on a Likert scale (from 0 to 10) was 9.4. The following complications were observed: 3 cases of heterotopic ossification (6.4%), one (2.1%) re-rupture of the tendon at the site of reattachment and 2 cases (4.3%) of posterior interosseous nerve palsy. No complication required further surgical treatment. CONCLUSION: This technique allows an anatomic reattachment of distal biceps tendon at the radial tuberosity providing full functional recovery with low complication rate.

Malunited extra-articular distal radius fractures: corrective osteotomies using volar locking plate.

BACKGROUND: Multiple techniques for corrective osteotomy have been developed in recent years with the same aims: to improve the radiographic parameters and improve motion, pain and grip strength. Volar fixed-angle plates have added a new concept to the treatment of distal radius fractures thanks to the low morbidity of the surgical approach and the strength of the final construct, allowing early mobilization and return to function. MATERIALS AND METHODS: Between 2005 and 2012, 20 patients with symptomatic dorsally malunited extra-articular fractures of the distal radius underwent corrective osteotomy using a volar locking plate without additional bone graft. At a mean follow-up of 50 months, all the patients were clinically and functionally evaluated. RESULTS: All measurements of pain, final range of motion and grip strength significantly improved compared with preoperative measurements. The mean preoperative DASH score reduced from 54 points preoperatively to 25 postoperatively. Based on the modified Mayo wrist score, we obtained 14 excellent and six good results. Palmar tilt improved from an average of 23° to 11°. Radial inclination improved from an average of 29° to 22°, and ulnar variance decreased from an average of 3.6 mm to 0.9 mm. There were two cases of transient median neuroapraxia that resolved before the 6-week follow-up appointment. No other major complications, including non-union and infection, were observed. CONCLUSION: The volar approach and locking plate, without necessarily the use of bone grafting, proved to be an effective approach for addressing symptomatic and even severe deformities of the distal radius. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

A new volar plate made of carbon-fiber-reinforced polyetheretherketon for distal radius fracture: analysis of 40 cases.

BACKGROUND: Implants based on the polyetheretherketon (PEEK) polymer have been developed in the last decade as an alternative to conventional metallic devices. PEEK devices may provide several advantages over the use of conventional orthopedic materials, including the lack of metal allergies, radiolucency, low artifacts on magnetic resonance imaging scans and the possibility of tailoring mechanical properties. The purpose of this study was to evaluate the clinical results at 12-month follow-up using a new plate made of carbon-fiber-reinforced polyetheretherketon for the treatment of distal radius fractures. MATERIALS AND METHODS: We included 40 consecutive fractures of AO types B and C that remained displaced after an initial attempt at reduction. The fractures were classified according to the AO classification: 21 fractures were type C1, 9 were type C2, 2 were type C3, 2 were type B1 and 6 were type B2. RESULTS: At a 12-month follow-up no cases of hardware breakage or loss of the surgically achieved fracture reduction were documented. All fractures healed, and radiographic union was observed at an average of 6 weeks. The final Disabilities of Arm, Shoulder and Hand score was 6.0 points. The average grip strength, expressed as a percentage of the contralateral limb, was 92 %. Hardware removal was performed only in one case, for the occurrence of extensor tenosynovitis. CONCLUSION: At early follow-up this device showed good clinical results and allowed maintenance of reduction in complex, AO fractures. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

Simple and comminuted displaced olecranon fractures: a clinical comparison between tension band wiring and plate fixation techniques.

INTRODUCTION: The purpose of this retrospective study is to compare the clinical, functional outcome and complications occurrence between tension band wiring (TBW) and plate fixation both for simple and comminuted displaced olecranon fractures. MATERIALS AND METHODS: Between January 2005 and June 2012 (minimum 1-year follow-up), 78 consecutive patients with Mayo type IIA and IIB fractures were treated with the following methods: tension band wire or plate and screws fixation. The primary outcome of this study was the functional outcome, assessed by the following self-administered evaluation scales: the disabilities of the arm, shoulder and hand, and the Mayo Elbow Performance Score. Secondary outcome measures included the assessment of pain level, analysis of passive range of motion, and the occurrence of any early or late complications. RESULTS: Comparing the clinical results between the two groups, at mean 33 months follow-up, no significant differences in the functional and clinical outcome were observed. Complications were reported in 48 and 17 % of cases, following TBW and plate fixation in patients treated for type IIA fractures, and similarly in 40 and 23 % of cases in type IIB fractures, respectively. Hardware removal was more frequently performed in TBW group: 38 versus 17 % for type IIA fractures and 20 versus 6 % for type IIB fractures. CONCLUSIONS: The findings of this study indicate that both with the use of TBW and plate fixation excellent/good clinical outcomes with minimal loss of physical capacity, little pain and disability can be obtained in the majority of patients with simple and comminuted displaced olecranon fractures. Hardware removal was most frequently observed after TBW.

Development of the Italian version of the Pain Stages of Change Questionnaire in patients with chronic low back pain: cross-cultural adaptation, confirmatory factor analysis, reliability and validity.

Translating, culturally adapting and validating the Italian version of the Pain Stages of Change Questionnaire (PSOCQ-I) to allow its use with Italian-speaking patients with low back pain. The PSOCQ-I was developed by forward-backward translation, a final review by an expert committee and a test of the prefinal version to establish its correspondence with the original English version. Psychometric testing included confirmatory factor analysis, reliability by internal consistency (Cronbach's α) and test-retest reliability (intraclass coefficient correlation), and construct validity by comparing PSOCQ-I with the Pain Catastrophising Scale (PCS), the Tampa Scale of Kinesiophobia (TSK), the Roland Morris Disability Scale (RMDQ), a pain Numerical Rating Scale (NRS), and the Hospital Anxiety and Depression Scale (Pearson's correlation). The questionnaire was administered to 308 patients with chronic low back pain. Factor analysis confirmed a four-factor solution (namely, Precontemplation, Contemplation, Action, and Maintenance), achieving an acceptable data-model fit. Internal consistency (α=0.91-93) and test-retest reliability (intraclass coefficient correlation=0.74-0.81) were satisfactory. Construct validity showed moderate correlations between Precontemplation and PCS (r=0.318), TSK (r=0.385), RMDQ (r=0.320) and NRS (r=0.335); low correlations were found between the other PSOCQ subscales and PCS (r=-0.062; 0.039), TSK (r=-0.164; 0.024), RMDQ (r=-0.073; 0.004) and NRS (r=-0.170; 0.020). Low correlations were found between the PSOCQ-I subscales and anxiety (r=-0.132; 0.150) and depression (r=-0.113; 0.186). The PSOCQ was translated successfully into Italian, and proved to have a good factorial structure and psychometric properties that replicated the results of other versions. Its use is recommended for research purposes.

The Italian version of the Pain Beliefs and Perceptions Inventory: cross-cultural adaptation, factor analysis, reliability and validity.

PURPOSE: To create an Italian version of the Pain Beliefs and Perceptions Inventory (PBAPI-I) and evaluate its psychometric properties. METHODS: The PBAPI was culturally adapted in accordance with international standards. The psychometric testing included factor analysis, investigating reliability by internal consistency (Cronbach's alpha) and test/retest stability (intraclass correlation coefficient, ICC), and exploring construct validity by comparing the PBAPI-I with a pain numerical rating scale (NRS), the Roland Morris Disability Questionnaire (RMDQ), the Pain Catastrophizing Scale (PCS), the Tampa Scale of Kinesiophobia (TSK), the Hospital Anxiety and Depression Score (HADS) and the Chronic Pain Coping Inventory (Pearson's correlation). RESULTS: One hundred and sixty-seven subjects with chronic low back pain (83 % compliance) completed the tool. Factor analysis revealed a three-factor (Time, Mystery and Self-Blame), 16-item solution (explained variance: 80 %). The questionnaire was internally consistent (α = 0.91-0.96), and its stability was good (ICCs = 0.73-0.82). As expected, the construct validity estimates indicated that the Time and Mystery subscales moderately correlated with the NRS (r = 0.33-0.54), RMDQ (r = 0.34-0.47), PCS (r = 0.37-0.49) and TSK (r = 0.30-0.43), whereas the correlations between the Self-Blame subscale and the same measures were poorer. The correlations with the HADS were moderate and poor (anxiety: r = 0.37-0.05; depression: r = 0.39-0.07). Maladaptive coping strategies were more related to pain beliefs than adaptive strategies. CONCLUSION: The PBAPI-I has good psychometric properties that replicate those of other versions.

Design and kinematics in total knee arthroplasty.

PURPOSE: Posterior stabilised (PS) total knee arthroplasty (TKA) design development that focused on restoring normal knee kinematics was followed by the introduction of reason-guided motion designs. Although all PS fixed-bearing knee designs were thought to have similar kinematics, reports show they have differing incidences and magnitudes of posterior femoral rollback and axial rotation. In this retrospective comparative study between two guided-motion total knee systems, we hypothesised that kinematic pattern has an influence on clinical and functional outcomes. METHODS: This study represents the continuation of a previously reported clinical and kinematics analysis. We retrospectively reviewed 347 patients treated with two different TKA designs: Scorpio NRG (Stryker Orthopedics) and Journey Bi-Cruciate Stabilised (BCS) knee system (Smith & Nephew). Two hundred and eighty-one patients were assessed clinically. Patients were divided into groups according to implanted TKA. Clinical evaluation with the Knee Injury and Osteoarthritis Outcome Score (KOOS) questionnaire was performed. Fifteen Scorpio NRG and 16 Journey BCS patients underwent video fluoroscopy during stair climbing, chair rising/sitting and step up/down at six months of follow-up. RESULTS: At an average 29 months of clinical follow-up, patients with Journey BCS TKAs reported better clinical results. Stiffness was more frequently reported in the Journey group (5.2 % vs 1.2 %), whereas anterior knee pain was observed in the Scorpio NRG group (1.9 %) only. Both prosthetic models reported different posterior translation of the medial and lateral contact points (CP) in all analysed motor tasks during knee flexion (BCS 10-18 mm; NRG Scorpio 2-3 mm). Both designs produced progressive external rotation of the femoral component relative to the tibia during flexion. CONCLUSIONS: Journey BCS showed statistically significant better KOOS results. The higher posterior femoral rollback observed in the kinematic assessment of this design, associated with a better patellofemoral design, may be the reason for better clinical outcome. The reported cases of stiffness and anterolateral joint pain could be attributed to excessive medial and lateral tibiofemoral posterior translation. The NRG group demonstrated good axial rotation, but this was not coupled with physiological kinematic patterns. Patellofemoral pain can be explained by a less friendly femoral-groove design. TKA clinical-functional outcome and complications were highly influenced by the bearing geometry and kinematic pattern of prosthetic designs.

Can TKA design affect the clinical outcome? Comparison between two guided-motion systems.

PURPOSE: In a retrospective comparative analysis in patients undergoing primary guided-motion total knee arthroplasty (TKA), the authors have evaluated whether different TKA implant design would influence the clinical and functional outcomes. METHODS: Between 2007 and 2009, 227 computer-assisted primary TKAs were performed in 219 consecutive patients. Patients received one of the two different fixed-bearing guided-motion TKA designs assisted by navigation surgery: the Scorpio Non-Restrictive Geometry (NRG) knee system and the Journey Bi-Cruciate Stabilized (BCS) knee systems. RESULTS: Data were available for 180 patients (187 knees). No significant differences were observed between the two groups with respect to preoperative demographic characteristics, range of motion (ROM) and radiographic knee alignment. At a mean follow-up of 29 months, the Journey BCS group had higher mean Knee Injury and Osteoarthritis Outcome Score (KOOS) in all subscales and a greater ROM than the Scorpio NRG group. This difference was statistically significant for the KOOS subscales of pain (p = 0.007) and knee-related quality of life (p = 0.045), as well as for postoperative ROM (p = 0.018). Considering the overall complications, 1 patient of Scorpio NRG group (0.5%) and 5 in Journey BCS (2.7%) had stiffness. Anterior knee pain was reported in 4 cases of Scorpio NRG group (2.1%). In the Journey BCS group were observed 2 cases (1.1%) of frontal plane instability and 1 case (0.5%) of synovitis pain. CONCLUSIONS: The bearing geometry and kinematic pattern of different guided-motion prosthetic designs can affect the clinical-functional outcome and complications type in primary TKA. LEVEL OF EVIDENCE: Clinical study, Level III.