Heterogeneous particle deaggregation and its implication for therapeutic aerosol performance.

Aerosolization performance of dry powder blends of drugs for the treatment of asthma or chronic obstructive pulmonary diseases have been reported in three previous articles. In vitro aerosolization was performed at defined shear stresses (0.624-13.143 N/m(2)). Formulations were characterized aerodynamically and powder aerosol deaggregation equations (PADE) and corresponding linear regression analyses for pharmaceutical aerosolization were applied. Particle deaggregation is the result of overcoming fundamental forces acting at the particle interface. A new method, PADE, describing dry powder formulation performance in a shear stress range has been developed which may allow a fundamental understanding of interparticulate and surface forces. The application of PADE predicts performance efficiency and reproducibility and supports rational design of dry powder formulations. The analogy of aerosol performance with surface molecular adsorption has important implications. Expressions describing surface adsorption were intended to allow elucidation of mechanisms involving surface heterogeneity, lateral interaction, and multilayer adsorption of a variety of materials. By using a similar expression for drug aerosolization performance, it is conceivable that an analogous mechanistic approach to the evaluation of particulate systems would be possible.

Dry powder aerosols generated by standardized entrainment tubes from drug blends with lactose monohydrate: 2. Ipratropium bromide monohydrate and fluticasone propionate.

The objectives of this study were: systematic investigation of dry powder aerosol performance using standardized entrainment tubes (SETs) and lactose-based formulations with two model drugs; mechanistic evaluation of performance data by powder aerosol deaggregation equation (PADE). The drugs (IPB and FP) were prepared in sieved and milled lactose carriers (2% w/w). Aerosol studies were performed using SETs (shear stresses tau(s) = 0.624-13.143 N/m(2)) by twin-stage liquid impinger, operated at 60 L/min. PADE was applied for formulation screening. Excellent correlation was observed when PADE was adopted correlating FPF to tau(s). Higher tau(s) corresponded to higher FPF values followed by a plateau representing invariance of FPF with increasing tau(s). The R(2) values for PADE linear regression were 0.9905-0.9999. Performance described in terms of the maximum FPF (FPF(max): 15.0-37.6%) resulted in a rank order of ML-B/IPB > ML-A/IPB > SV-A/IPB > SV-B/IPB > ML-B/FP > ML-A/FP > SV-B/FP > SV-A/FP. The performance of IPB was superior to FP in all formulations. The difference in lactose monohydrate carriers was less pronounced for the FPF in IPB than in FP formulations. The novel PADE offers a robust method for evaluating aerodynamic performance of dry powder formulations within a defined tau(s) range.

Dry powder aerosols generated by standardized entrainment tubes from drug blends with lactose monohydrate: 1. Albuterol sulfate and disodium cromoglycate.

The major objective of this study was: discriminatory assessment of dry powder aerosol performance using standardized entrainment tubes (SETs) and lactose-based formulations with two model drugs. Drug/lactose interactive physical mixtures (2%w/w) were prepared. Their properties were measured: solid-state characterization of phase behavior and molecular interactions by differential scanning calorimetry and X-ray powder diffraction; particle morphology and size by scanning electron microscopy and laser diffraction; aerosol generation by SETs and characterization by twin-stage liquid impinger and Andersen cascade impactor operated at 60 L/min. The fine particle fraction (FPF) was correlated with SET shear stress (tau(s)), using a novel powder aerosol deaggregation equation (PADE). Drug particles were <5 microm in volume diameter with narrow unimodal distribution (Span <1). The lowest shear SET (tau(s) = 0.624 N/m(2)) gave a higher emitted dose (ED approximately 84-93%) and lower FPF (FPF(6.4) approximately 7-25%). In contrast, the highest shear SET (tau(s) = 13.143 N/m(2)) gave a lower ED (ED approximately 75-89%) and higher FPF (FPF(6.4) approximately 15-46%). The performance of disodium cromoglycate was superior to albuterol sulfate at given tau(s), as was milled with respect to sieved lactose monohydrate. Excellent correlation was observed (R(2) approximately 0.9804-0.9998) when pulmonary drug particle release from the surface of lactose carriers was interpreted by PADE linear regression for dry powder formulation evaluation and performance prediction.

Physical characterization of component particles included in dry powder inhalers. I. Strategy review and static characteristics.

The performance of dry powder aerosols for the delivery of drugs to the lungs has been studied extensively in the last decade. The focus for different research groups has been on aspects of the powder formulation, which relate to solid state, surface and interfacial chemistry, bulk properties (static and dynamic) and measures of performance. The nature of studies in this field, tend to be complex and correlations between specific properties and performance seem to be rare. Consequently, the adoption of formulation approaches that on a predictive basis lead to desirable performance has been an elusive goal but one that many agree is worth striving towards. The purpose of this paper is to initiate a discussion of the use of a variety of techniques to elucidate dry particle behavior that might guide the data collection process. If the many researchers in this field can agree on this, or an alternative, guide then a database can be constructed that would allow predictive models to be developed. This is the first of two papers that discuss static and dynamic methods of characterizing dry powder inhaler formulations.

Physical characterization of component particles included in dry powder inhalers. II. Dynamic characteristics.

Characteristics of particles included in dry powder inhalers is extended from our previous report (in this journal) to include properties related to their dynamic performance. The performance of dry powder aerosols for pulmonary delivery is known to depend on fluidization and dispersion which reflects particle interactions in static powder beds. Since the solid state, surface/interfacial chemistry and static bulk properties were assessed previously, it remains to describe dynamic performance with a view to interpreting the integrated database. These studies result in complex data matrices from which correlations between specific properties and performance may be deduced. Lactose particles were characterized in terms of their dynamic flow, powder and aerosol electrostatics, and aerodynamic performance with respect to albuterol aerosol dispersion. There were clear correlations between flow properties and aerosol dispersion that would allow selection of lactose particles for formulation. Moreover, these properties can be related to data reported earlier on the morphological and surface properties of the carrier lactose particles. The proposed series of analytical approaches to the evaluation of powders for inclusion in aerosol products has merit and may be the basis for screening and ultimately predicting particle performance with a view to formulation optimization.