Comparison with Navigation of a Novel Three-Step Technique for Improving Accuracy of the Distal Femoral Resection during Conventional TKA: A Case-Control Study.

Correct placement of the femoral component in the coronal plane during primary total knee arthroplasty (TKA) is related to long-term survival. The aim of this radiographic study was to determine the accuracy of a novel three-step technique for improving the accuracy of the distal femoral cut during conventional technique and compare it with computer navigation during TKA. A total of 458 TKAs were retrospectively analyzed (178 conventional TKAs with the novel technique and 280 navigated TKAs) for postoperative femoral component coronal alignment and compared between the two groups. Mean femoral component coronal alignment was not significantly different (p = 0.314) between the two groups. There was no significant difference in the mean femoral component coronal alignment between varus and valgus knees. The number of outliers (90 ± 3 degrees) for femoral component coronal alignment was not significantly different between the two groups when assessed separately for varus and valgus deformities. The mean value of femoral component alignment using the conventional technique in knees with varus deformity <10 degrees was 88.8 degrees, in knees with varus deformity 10 to 20 degrees was 89.4 degrees, and in those with varus deformity >20 degrees was 90.2 degrees. Femoral component alignment in knees with varus <10 degrees was significantly different from those >20 degrees (p = 0.006); there was no significant difference between knees with varus <10 degrees and those with 10 to 20 degrees varus (p = 0.251), nor between 10 and 20 degrees varus knees and those with varus >20 degrees (p = 0.116). Using the novel three-step technique during conventional TKA to perform the distal femoral cut can help achieve femoral component coronal alignment comparable to the navigation technique.

Is it prime time for robotic-assisted TKAs? A systematic review of current studies.

Introduction: Less-than-optimum positioning of femoral and tibial components and improper soft tissue tension, with abnormal loads and reduced range of motion, may cause lower patient satisfaction rates. To reduce surgeon-related variables during TKA, technology-assisted TKA was introduced, including computer navigation and robotic-assisted surgery (RATKA). Although several studies show promising short- and long-term functional and radiological outcomes of RATKA, there are still concerns related to its absolute superiority over conventional TKA. Methods: This review aims to provide an updated insight into the most recent articles reporting on outcomes (functional, radiological, and complications) of RATKA through a systematic search of major databases. A comprehensive English literature search was performed by both authors through four databases (Embase, PubMed, Web of Science, and Scopus). The full text of the final eligible studies was evaluated for inclusion, resulting in 13 studies that are included in this review. Results: There were 2112 knees in the 13 studies, with a follow-up ranging from three months to 13 years; only three were randomized controlled trials (RCTs), and nine directly compared the results of RATKA with CTKA technique. Seven studies reported the operative time ranging from 76.8 to 156 min; six reported a longer operative time with RATKA. Length of hospital stay (LOS) was reported in six studies which ranged from 0.48 to 2.1 days; in four studies the LOS was shorter with RATKA. In seven of the nine studies comparing RATKA with CTKA, no difference in functional outcomes was found. Four out of six studies reported that the overall alignment had mechanical alignment within ±3° of neutral alignment in all RATKA patients with an HKA ranging from -0.3 to 1.8°. Only one study reported better radiological outcomes in the RATKA group. In six comparative studies, no difference was found in the incidence of complications between RATKA and CTKA. Conclusion: Although robotic-assisted total knee arthroplasty is a promising technology that provides better component alignment and superior early functional outcomes, the justification for its widespread adoption needs more robust evidence through well-designed and better long-term studies demonstrating superior, predictable, and durable clinical results compared to conventional total knee arthroplasty techniques.

A Protocol to Systematic Radiographic Assessment of Primary Total Knee Arthroplasty.

Although total knee arthroplasty (TKA) is considered one of the most successful procedures, however, a subset of patients are unsatisfied with the results, even with the introduction of new technologies and implant designs. Radiological assessment of TKA is still considered the most prevalent imaging modality for evaluating the knee joint pre-and postoperatively. Assessment of various angles and indices which could be measured in different radiographic views of the knee provides valuable information about the alignment of the entire limb and the individual prosthetic components, more so in the light of recent nuanced concepts of technique, alignment, and balance. This review article aims to present a comprehensive yet systematic approach to the most useful radiographic parameters for assessing the knee preoperatively and post-TKA by explaining the tools and techniques used for measuring various angles, indices and ratios in the coronal, sagittal and axial planes for diagnosis, preoperative planning, postoperative assessment, and routine follow-up. The protocol we followed in this review entailed first reporting the possible applications and software which could help in measuring these variables, then we mentioned the required series of knee radiographs. For the desired variables, we divided the assessment according to each plane, and in each, we reported the optimum position of the desired radiographic view followed by determining the axis and lines which will later form the desired angles to be measured; finally, we collected all the measurements in a table with the native knee values and the most accepted values after TKA.

Prediction of leg length change (LLC) after correcting varus and flexion deformity in patients undergoing TKA.

PURPOSE: Patients with varus and fixed flexion deformity (FFD) undergoing TKA may have a significant leg length change (LLC) after surgery. We aimed to determine the correlation between changes in HKA or FFD and leg length in patients undergoing TKA, the combined effect of coronal and sagittal plane deformity correction on LLC, and the possibility of estimating LLC mathematically. MATERIALS AND METHODS: This was a prospective radiographic evaluation of 242 knees, which had undergone primary unilateral TKA for advanced OA with varus and FFD. Full-length standing calibrated anteroposterior radiographs were used to measure the hip-knee-ankle axis (HKA) and functional leg length after adjusting for magnification. Clinical evaluation of FFD was done using a handheld goniometer. RESULTS: 224 knees (92.6%) showed increased limb length after TKA averaging 10.7 mm (SD 9.5 mm, P = .000). There was a significant correlation between the change in HKA and FFD from preoperatively to postoperatively with the amount of LLC (ρ 0.326 and 0.346, respectively, P = .000). FFD improvement from preoperatively to postoperatively was 8.1° to 1° (P = .000), respectively. A linear relationship was established between LLC and changes in HKA and FFD, where 10° improvement in HKA would result in an LLC of nearly 4 mm, and 10° improvement in FFD would result in a LLC of nearly 8 mm. CONCLUSION: LLC may be substantial after correcting varus and FFD with unilateral TKA, it correlates with the change in HKA and FFD and can be mathematically estimated. CLINICAL TRIALS . GOV IDENTIFIER: NCT03502382.

Efficacy of a novel iPod-based navigation system compared to traditional navigation system in total knee arthroplasty.

BACKGROUND: This prospective study aimed to verify the efficacy of a novel, hand-held, iPod-based navigation system in comparison to traditional navigation system for total knee arthroplasty (TKA). METHODS: Limb alignment, tibial and distal femoral bone cut thickness and plane were recorded intraoperatively using both iPod-based and traditional navigation system in 36 knees undergoing primary TKAs. RESULTS: Intraoperatively, the iPod-based navigation system showed good to excellent correlation and reliability for tibial and distal femoral bone cut thickness, plane of the femoral cut and limb alignment when compared to the traditional navigation system. CONCLUSIONS: Despite its quick registration feature, the iPod-based system has an efficacy similar to traditional navigation system and is a positive step towards making navigation systems for TKA more compact, user-friendly, time and cost-effective.

Mobile-bearing medial unicompartmental knee arthroplasty restores limb alignment comparable to that of the unaffected contralateral limb.

Background and purpose - Medial unicompartmental knee arthroplasty (UKA) is undertaken in patients with a passively correctable varus deformity. We investigated whether restoration of natural soft tissue tension would result in a lower limb alignment similar to that of the contralateral unaffected lower limb after mobile-bearing medial UKA. Patients and methods - In this retrospective study, hip-knee-ankle (HKA) angle, position of the weight-bearing axis (WBA), and knee joint line obliquity (KJLO) after mobile-bearing medial UKA was compared with that of the unaffected (clinically and radiologically) contralateral lower limb in 123 patients. Results - Postoperatively, HKA angle was restored to within ±3° of the contralateral lower limb in 87% of the patients and the WBA passed within ±1 Kennedy and White's tibial zone of the unaffected contralateral lower limb in 95% of the patients. The mean KJLO in the operated limbs was not significantly different from that in the unaffected lower limbs (p = 0.07) and the KJLO in the operated limb was restored to within ±3° of that in the contralateral lower limb in 96% of the patients. Interpretation - Lower limb alignment and knee joint line obliquity after mobile-bearing medial UKA were comparable to that of the unaffected contralateral limb in most patients. Comparison with the contralateral unaffected lower limb is a reliable method for evaluation and validation of limb mechanical alignment after mobile-bearing medial UKA.

No effect of obesity on limb and component alignment after computer-assisted total knee arthroplasty.

PURPOSE: This retrospective study aimed to determine if computer navigation provides consistent accuracy for limb and component alignment during TKA irrespective of body mass index (BMI) by comparing limb and component alignment and the outlier rates in obese versus non-obese individuals undergoing computer-assisted TKA. METHODS: Six hundred and thirty-five computer assisted total knee arthroplasties (TKAs) performed in non-obese individuals (BMI<30 kg/m(2)) were compared with 520 computer-assisted TKAs in obese individuals (BMI ≥ 30 kg/m(2)) for postoperative limb and component alignment using full length standing hip-to-ankle radiographs. RESULTS: No significant difference in postoperative limb alignment (179.7° ± 1.7° vs 179.6° ± 1.8°), coronal femoral (90.2° ± 1.6° vs 89.8° ± 1.9°) and tibial component (90.2° ± 1.6° vs 90.3° ± 1.7°) alignment and outlier rates (6.2% vs 7.5%) was found between non-obese and obese individuals. Similarly, alignment and the outlier rates were similar when non-obese individuals and a subgroup of morbidly obese individuals (BMI >40 kg/m(2)) were compared. CONCLUSIONS: Computer navigation can achieve excellent limb and component alignment irrespective of a patient's BMI. Although obesity may not be an indication per se for using computer navigation during TKA, it will help achieve consistently accurate limb and component alignment in obese patients. LEVEL OF EVIDENCE: Level II.

Correction of varus deformity during TKA with reduction osteotomy.

BACKGROUND: Reduction osteotomy (removing the posteromedial tibial bony flare) is one step to aid in achieving deformity correction in varus arthritic knees during TKA. However, the amount of deformity correction achieved with reduction osteotomy during TKA is unclear. QUESTIONS/PURPOSES: We therefore addressed the following questions: (1) What is the amount of deformity correction achieved with reduction osteotomy during TKA in varus knees? (2) What is the correlation of amount of deformity correction achieved to the amount of bone osteotomized and the degree of varus deformity? METHODS: We prospectively collected and analyzed intraoperative data on the degree of varus deformity before and after reduction osteotomy (using computer navigation) and the amount of reduction osteotomy performed (using a measuring scale) in 71 primary, computer-assisted TKAs. RESULTS: For a mean reduction osteotomy of 7.5 ± 2 mm, a mean correction of 3.5° ± 1° was achieved; a mean osteotomy of 2 mm was required (confidence interval, 1.7-2.6 mm) for every 1° correction of varus deformity. Degree of varus correction achieved correlated positively with the amount of osteotomy performed, especially in knees with preoperative varus deformity of < 15° (r = 0.77, p < 0.001) and the preosteotomy residual varus deformity correlated positively with the amount of correction achieved (r = 0.81, p < 0.001). CONCLUSIONS: Reduction osteotomy can achieve deformity correction in a predictable 2 mm for 1° in most varus arthritic knees during TKA. Further studies are required to ascertain its effectiveness as a soft tissue-sparing step when performed early on during TKA to achieve deformity correction.

Surgical technique: Computer-assisted sliding medial condylar osteotomy to achieve gap balance in varus knees during TKA.

BACKGROUND: Extensive posteromedial release to correct severe varus deformity during TKA may result in mediolateral or flexion instability and may require a constrained implant. We describe a technique combining computer navigation and medial condylar osteotomy in severe varus deformity to achieve a primary goal of ligament balance during TKA. DESCRIPTION OF TECHNIQUE: The goal of this procedure was to achieve mediolateral gap balance in varus knees with rigid, recalcitrant medial contracture, with or without excessive lateral laxity, not amenable to extensive medial soft tissue releases. A sliding medial condylar osteotomy (SMCO) was performed under navigation guidance and the condylar block internally fixed using cancellous screws. METHODS: We prospectively evaluated mediolateral laxity, Knee Society scores, and knee ROM after SMCO in 12 varus arthritic knees in 11 patients (five men, six women) undergoing TKA with a minimum followup of 2 years (mean, 2 years; range, 2-2.5 years). RESULTS: The degree of mediolateral knee laxity improved from Grade 2 (in four knees) and Grade 3 (in eight knees) preoperatively to Grade 1 (< 5 mm) in all knees at last followup. Mean Knee Society score improved from 30 (range, 10-54) to 92 (range, 86-100). Mean knee flexion improved from 106° (range, 90°-120°) to 112° (range, 100°-124°), and no knee had any extensor lag or residual flexion deformity (> 5°). Three knees had asymptomatic fibrous union at the osteotomy site. CONCLUSIONS: Computer-assisted SMCO in varus knees with recalcitrant medial contracture achieves improved mediolateral stability and knee function after TKA. Our technique uses navigation to accurately reposition the medial condylar block to equalize medial and lateral gaps, thereby ensuring a stable well-aligned knee without deploying constrained implants.

The influence of preoperative deformity on valgus correction angle: an analysis of 503 total knee arthroplasties.

We prospectively studied variations in valgus correction angle (VCA) and the influence of preoperative limb deformity on VCA in 503 consecutive total knee arthroplasties done in 393 patients. The percentage of limbs that had VCA values less than 5° was 10.9%, and that with VCA values greater than 7° was 44.9%. The percentage of limbs with VCA greater than 7° was significantly more in varus knees, and that with VCA less than 5° was significantly more in valgus knees; preoperative deformity showed a significant correlation with VCA. Choosing a fixed-routine VCA of 5° to 7° may cause an unacceptable planning error that may be minimized by individualizing VCA or using computer navigation.

Which factors increase risk of malalignment of the hip-knee-ankle axis in TKA?

BACKGROUND: Computer navigation has improved accuracy and reduced the percentage of alignment outliers in TKA. However, the characteristics of outliers and the risk factors for limb malalignment after TKA are still unclear. QUESTIONS/PURPOSES: We therefore addressed the following questions: (1) What is the incidence and characteristics of outliers for postoperative limb mechanical axis (hip-knee-ankle [HKA] angle outside the conventional 180° ± 3° range) and component alignment in TKA? And (2) what are the preoperative clinical or radiographic risk factors for limb mechanical axis malalignment in TKA? METHODS: We retrospectively reviewed the clinical and radiographic records of 1500 computer-assisted TKAs to identify outliers for postoperative HKA axis and component alignment and determined risk factors for malalignment. Full-length hip-to-ankle and knee radiographs were used to measure preoperative HKA angle, femoral coronal bowing, joint divergence angle, tibial subluxation, and tibial bone loss and postoperative HKA angle and femoral and tibial component angle. RESULTS: The incidence of outliers for postoperative limb mechanical axis, femoral component alignment, and tibial component alignment was 7% (112 of 1500 TKAs), 7%, and 8%, respectively, with 70% of limbs placed in excessive varus and 30% in excessive valgus. Preoperative varus deformity of more than 20° and femoral bowing of more than 5° were associated with increased risk of placing the limb mechanical axis outside the acceptable ± 3° range after computer-assisted TKA. CONCLUSIONS: The presence of preoperative radiographic risk factors should alert the surgeon to increased chance of malalignment and every measure should be undertaken in such at-risk knees to ensure proper limb and component alignment and soft tissue balance.

Postoperative limb alignment and its determinants after minimally invasive Oxford medial unicompartmental knee arthroplasty.

One hundred twenty-two consecutive minimally invasive Oxford phase 3 medial unicompartmental knee arthroplasties in 109 patients were evaluated for postoperative limb alignment and the influence of factors such as preoperative limb alignment, age, body mass index, sex, insert thickness, and surgeon's experience. The mean mechanical preoperative hip-knee-ankle (HKA) angle of 172.2° ± 3.1° improved to 177.1° ± 2.9° postoperatively. In 75% of the limbs, the HKA angle was restored to within an acceptable alignment of 177° ± 3°, 14% of the limbs were in excessive varus (<174°), and 11% were in valgus (>180°). Only preoperative HKA angle was predictive of postoperative HKA angle. Although most of the limbs had acceptable limb alignment after unicompartmental knee arthroplasty, limbs with more severe preoperative varus deformity had a tendency to remain in excessive varus, and limbs with lesser preoperative varus deformity had a greater tendency to go into valgus postoperatively.

Alignment of computer-assisted total knee arthroplasty in patients with altered hip center.

This study aimed to determine limb and component alignment after computer-assisted total knee arthroplasty in 30 patients (32 limbs) with an altered hip center due to a prior hip implant or deformed femoral head. There were no outliers greater than ±3° in the postoperative coronal alignment of the limb and the femoral component in relation to the altered hip center. Two limbs (8%) were more than ±3° for coronal alignment of the femoral component in relation to the anatomical hip center and 96% of limbs had less than 2° deviation in relation to the altered hip center. Computer-navigated total knee arthroplasty results in accurate restoration of lower limb and component alignment in patients with prior hip implants or deformed femoral heads where accurate restoration of alignment may be challenging due to altered hip center.

Lateral epicondylar osteotomy using computer navigation in total knee arthroplasty for rigid valgus deformities.

Extensive release of posterolateral structures may be required to correct rigid and severe valgus deformities during total knee arthroplasty. Current techniques are technically difficult, may not accurately restore soft tissue balance, and are associated with postoperative complications. Computer navigation while performing lateral femoral epicondylar osteotomy allows precise, controlled, quantitative lengthening of lateral structures and restoration of optimum soft tissue balance and alignment.

Distal femoral rotational axes in Indian knees.

PURPOSE: To measure the angular relationships of distal femoral rotational axes in 100 normal Indian knees. METHODS: 42 men and 8 women aged 26 to 40 (mean, 31) years, with 100 normal non-arthritic knees were recruited. Anatomic landmarks were measured using computed tomography. They included the posterior condylar axis, the transepicondylar axis, the anteroposterior axis (Whiteside's line), the posterior condylar angle (PCA), the Whiteside-epicondylar angle (W-EP), and the Whiteside-posterior condylar angle (W-PC). RESULTS: The mean PCA, W-EP, and W-PC were 5, 90.8, and 95.8 degrees, respectively. The mean femorotibial alignment was 179.6 degrees. The differences between the left and right sides were significant only for the WEP and W-PC. Only the PCA and W-EP were weakly correlated (r=0.338, p=0.001). CONCLUSION: There are differences in distal femoral rotational axes among Indian, Caucasian, and Japanese knees. Our data can be used to evaluate changes in those axes in ageing or arthritic patients.

A comparison of coronal plane axial femoral relationships in Asian patients with varus osteoarthritic knees and healthy knees.

Standing full-length radiographs were measured to compare coronal femoral axes between 250 limbs in patients with varus osteoarthritis with 50 healthy controls. Mean distal femoral axis-mechanical axis angle was 7.3 degrees +/- 1.6 degrees , and mean femoral bow was 3.6 degrees +/- 2.5 degrees in patients compared to 5.5 degrees +/- 0.8 degrees and 0.4 degrees +/- 1.2 degrees , respectively, in controls. Femoral condylar-mechanical axis angle was significantly lower in osteoarthritic limbs (89.9 degrees + 2.8 degrees ) as compared to controls (93.1 degrees + 1.6 degrees ). Varus deformity correlated significantly with femoral bowing (P < .05; correlation coefficient, 0.4). Osteoarthritic limbs (18.8%) showed a distal femoral axis-mechanical axis angle more than 9 degrees . These findings have implications in deciding the optimum valgus angle at which to perform distal femoral resection in total knee arthroplasty.

Cruciate ligaments in arthritic knees: a histologic study with radiologic correlation.

Anterior cruciate ligaments (ACLs) and posterior cruciate ligaments (PCLs) from 45 osteoarthritic knees were histologically examined to evaluate the frequency and grade the severity of degenerative changes, which were correlated with radiologic grade of arthritis and severity of deformity at the knee. Immunohistochemical staining was used to identify neurofilaments in 10 knees. A histologic score was generated for both cruciates based on changes found on light microscopy. The ACL was severely degenerated, absent, or disrupted in knees with radiologic arthritis higher than grade 3 and varus deformity exceeding 15 degrees . The PCL was moderately degenerated in most knees irrespective of the grade of arthritis and severity of deformity. Neurofilaments were present in all 10 PCLs and absent in 4 ACLs.

Tibial articular cartilage wear in varus osteoarthritic knees: correlation with anterior cruciate ligament integrity and severity of deformity.

Tibial articular cartilage wear was assessed intraoperatively in 100 consecutive patients with varus osteoarthritis undergoing total knee arthroplasty. Severity of deformity on radiographs, integrity of the anterior cruciate ligament (ACL) at surgery, and body mass index were recorded. Posterior half of the medial tibial plateau was more commonly involved in knees with ACL deficiency; there was predominantly anteromedial involvement with an intact ACL. Varus deformity was significantly greater in knees with a deficient ACL than with an intact ACL. Severity of deformity did not alter the wear pattern, irrespective of the ACL integrity. The functional status of ACL in an osteoarthritic knee can be corroborated with the wear pattern on the tibial plateau articular cartilage.