ABSTRACT
Functional oxide films were obtained at low temperature by combination of aqueous precursors and a UV-assisted annealing process (aqueous photochemical solution deposition). For a PbTiO(3) model system, functional ferroelectric perovskite films were prepared at only 400 °C, a temperature compatible with the current Si-technology demands. Intrinsically photosensitive and environmentally friendly aqueous precursors can be prepared for most of the functional multimetal oxides, as additionally demonstrated here for multiferroic BiFeO(3), yielding virtually unlimited possibilities for this low-temperature fabrication technology.
ABSTRACT
In this paper a 2(8-4) fractional factorial design of experiments is applied to identify the important parameters that affect the average diameter of ZnO rods, synthesized by means of a hydrothermal procedure. A water-based Zn(2+) precursor is used for the formation of one-dimensional ZnO particles, without the presence of an organic additive. Results indicate that, at the investigated levels, four of the parameters have a significant effect on the mean diameter. These are the temperature, the heating rate, stirring and an ultrasonic pre-treatment of the precursor solution. Experiments carried out with zinc acetate and zinc chloride do not show a significant difference in rod diameter. Other parameters that do not show a significant effect are the concentration of Zn(2+), the molar ratio between the hydroxyl and the zinc ions, and the reaction time. Interactions are observed between stirring and an ultrasonic pre-treatment and between the zinc concentration and the OH:Zn ratio. By fixing the significant factors at their optimal value it is possible to decrease the mean diameter. The particles are characterized by means of x-ray diffraction (XRD) and transmission electron microscopy (TEM).
Subject(s)
Colloids/chemistry , Models, Chemical , Nanotechnology/methods , Nanotubes/chemistry , Nanotubes/ultrastructure , Water/chemistry , Zinc Oxide/chemistry , Computer Simulation , Crystallization/methods , Hot Temperature , Macromolecular Substances/chemistry , Materials Testing , Models, Molecular , Models, Statistical , Molecular Conformation , Particle Size , Surface PropertiesABSTRACT
PURPOSE: This study was done to elucidate the physical and pharmaceutical properties of itraconazole-HPMC dispersions and the influence of water on the phase separation. METHODS: Extrudates were prepared using a corotating twin-screw hot-stage extruder with fixed process parameters. Modulated-temperature differential scanning calorimetry (MTDSC) and DSC 111 were used to examine the mixing behavior of itraconazole and the carrier by evaluation of the glass transition region. High temperature diffuse reflectance infrared transform spectroscopy (HT-DRIFT) was performed to reveal interactions between itraconazole and HPMC. Dissolution was performed to investigate the pharmaceutical performance of the dispersions. RESULTS: Although the dissolution rate of itraconazole significantly increased, we found that the solid dispersions do not form a homogeneous system. A different picture was obtained depending on the way MTDSC analysis was performed, i.e., using open or closed sample pans. Water can evaporate in open pans, which allows itraconazole to interact with HPMC and leads to a partially mixed phase. Analysis in hermetically closed pans revealed a further phase separation as water remains on the sample and impedes the interaction between drug and polymer. CONCLUSION: Solid dispersions of itraconazole and HPMC do not form a homogeneous phase.
