In vitro anti-prostate adenocarcinoma and lung cancer studies of phenoxyaniline-block-poly(methyl methacrylate) based nanocomposites via controlled radical polymerization.

A phenoxyaniline-based macroinitiator is utilized for the first time in order to produce phenoxyaniline-block-poly(methyl methacrylate) composites through single electron transfer-living radical polymerization (SET-LRP) under mild conditions. A different weight percentage of Cloisite 93A is added into the polymer mixtures in order to increase their biochemical properties. The prepared block copolymer nanocomposites are characterized using ATR-IR, UV-vis-spectroscopy, XRD, Raman, TGA, DSC, a particle size analyzer, contact angle measurements and SEM in order to characterize their structural, thermal, surface and morphological properties. Further, the developed polymeric nanocomposites are successfully applied in two different cancer cell lines (prostate adenocarcinoma and lung cancer), which show excellent anticancer properties. Also, acridine orange/ethidium bromide (AO/EtBr) dual staining is performed, which causes drastic cell death by apoptosis in both A549 and PC-3 cell lines, which indicated that the prepared polymeric nanocomposites effectively inhibit the cell proliferation and induce the apoptosis in both the cancer cells. Here nanoclay is used for cancer treatment because of its complete water solubility, which essentially causes the formation of a cationic complex between the clay and drug through electrostatic interactions. Hence, the exchange of ions between the clay and other ions in the biological environment leads to inhibition of the proliferation of prostate adenocarcinoma and lung cancer cells in the system.

Copper (0) Mediated Single Electron Transfer-Living Radical Polymerization of Methyl Methacrylate: Functionalized Graphene as a Convenient Tool for Radical Initiator.

Polymer nanocomposites have been synthesized by the covalent addition of bromide-functionalized graphene (Graphene-Br) through the single electron transfer-living radical polymerization technique (SET-LRP). Graphite functionalized with bromide for the first time via an efficient route using mild reagents has been designed to develop a graphene based radical initiator. The efficiency of sacrificial initiator (ethyl α-bromoisobutyrate) has also been compared with a graphene based initiator towards monitoring their Cu(0) mediated controlled molecular weight and morphological structures through mass spectroscopy (MOLDI-TOF) and field emission scanning electron microscopy (FE-SEM) analysis, respectively. The enhancement in thermal stability is observed for graphene-grafted-poly(methyl methacrylate) (G-g-PMMA) at 392 °C, which may be due to the influence ofthe covalent addition of graphene, whereas the sacrificial initiator used to synthesize G-graft-PMMA (S) has low thermal stability as analyzed by TGA. A significant difference is noticed on their glass transition and melting temperatures by DSC. The controlled formation and structural features of the polymer-functionalized-graphene is characterized by Raman, FT-IR, UV-Vis spectroscopy, NMR, and zeta potential measurements. The wettability measurements of the novel G-graft-PMMA on leather surface were found to be better in hydrophobic nature with a water contact angle of 109 ± 1°.

Synthesis of Fluorophore Decorated Single-Walled Carbon Nanotubes for In-Vitro Cytocompatibility.

We report rhodamine based fluorophore derivative for the stable dispersion of single-walled carbon nanotubes (SWCNTs), which can afford better fluorescent label to carbon nanotubes (CNTs). The nanotubes-fluorophore conjugates are helpful in achieving stable dispersion in polar and non-polar solvents with intense fluorescence. The product was characterized through NMR, Mass spectrometry, Raman, XPS, SEM, AFM and Fluorescence measurements. The formation of SWCNT-g- Rhodamine was confirmed by the presence of D and G bands in Raman spectrum. The alkyl and aryl groups in the range of 14.8, 17.6, 38.1 and 96.3 ppm confirms the grafting of the nanocomposite through NMR. The morphological studies were carried out intensively for analyzing SWCNTs stable dispersion and the results from EDAX measurements shows the elements weight% of C: 35.09 and N: 30.1 concludes that SWCNTs are completely grafted onto rhodamine derivatives. The application of SWCNTs fluorophore conjugates were analyzed by cell viability studies using MTT assay and exhibits less toxic compare to other functionalized CNTs. The viability of percentage increases with decrease in the concentration of SWCNT-COCl with 91.7% of live cells even after 24 h at a concentration of 250 µg for SWCNT-g-Rhodamine. The fluorescent images obtained during viability analysis shows enhanced fluorescence for living cells in case of SWCNT-g-Rhodamine compared to SWCNT-COCl, which clearly shows the utility of decorating nanotubes with fluorophore. This research work further extends its application for molecular sensing and other biological process.

Carbon Nanotube Reinforced Polymer-Stabilized Liquid Crystal Device: Lowered and Thermally Invariant Threshold with Accelerated Dynamics.

Polymer-stabilized liquid crystal (PSLC) devices comprise a polymer matrix in an otherwise continuous phase of liquid crystal. The fibrils of the polymer provide, even in the bulk, virtual surfaces with finite anchoring energy resulting in attractive electro-optic properties. Here, we describe a novel variation of the PSLC device fabricated by reinforcing the polymer matrix with polymer-capped single-walled carbon nanotubes (CNTs). The most important outcome of this strengthening of the polymer strands is that the threshold voltage associated with the electro-optic switching becomes essentially temperature independent in marked contrast to the significant thermal variation seen in the absence of the nanotubes. The reinforcement reduces the magnitude of the threshold voltage, and notably accelerates the switching dynamics and the effective splay elasticity. Each of these attributes is quite attractive from the device operation point of view, especially the circuit design of the required drivers. The amelioration is caused by the polymer decorating CNTs being structurally identical to that of the matrix. The resulting good compatibility between CNTs and the matrix prevents the CNTs from drifting away from the matrix polymer, a lacuna in previous attempts to have CNTs in PSLC systems. The difference in the morphology, perhaps the primary cause for the effects seen, is noted in the electron microscopy images of the films.

Sol-gel network silica/modified montmorillonite clay hybrid nanocomposites for hydrophobic surface coatings.

Sol-gel silica/nanoclay composites were prepared through sol-gel polymerization technique using tetraethylorthosilicate precursor and montmorillonite (MMT) clay in aqueous media. In this study, both montmorillonite-K(+) and organically modified MMT (OMMT) clays were used. The prepared composites were coated on glass substrate by making 1 wt% solution in ethyltrichlorosilane. The incorporation of nanoclay does not alter the intensity of characteristic Si-O-Si peak of silica network. Thermogravimetric studies show that increasing clay content increased the degradation temperature of the composites. Differential scanning calorimetry (DSC) results of organically modified MMT nanoclay incorporated composite show a shift in the melting behavior up to 38°C. From DSC thermograms, we observed that the ΔH value decreased with increasing clay loading. X-ray diffraction patterns prove the presence of nanoclay in the composite and increase in the concentration of organically modified nanoclay from 3 to 5 wt% increases the intensity of the peak at 2θ=8° corresponds to OMMT. Morphology of the control silica gel composite was greatly influenced by the incorporation of OMMT. The presence of nanoclay changed the surface of control silica gel composite into cleaved surface with brittle in nature. Contact angle measurements were done for the coatings to study their surface behavior. These hybrid coatings on glass substrate may have applications for hydrophobic coatings on leather substrate.