Study of penetration behavior of PCB-DNAPL in a sand layer by a column experiment.

To better understand the infiltration performances of high concentration PCB oils (KC-300 and KC-1000 polychlorinated biphenyl (PCB) mixtures), representative dense non-aqueous phase liquid (DNAPL), under both saturated and unsaturated conditions, we conducted experiments on a sand column filled with Toyoura Standard Sand. When PCB oil with the volume comparable to the total porosity in the column was supplied, the residual PCB concentrations under PCB-water conditions were 4.9×10(4)mgkg(-1) in KC-300 and 3.9×10(4)mgkg(-1) in KC-1000. Under PCB-air conditions, residual PCB concentrations were 6.0×10(4)mgkg(-1) and 2.4×10(5)mgkg(-1) in the upper and lower parts for KC-300 and 3.6×10(4)mgkg(-1) and 1.5×10(5)mgkg(-1) in those for KC-1000, respectively, while the rest of the PCBs were infiltrated. On the other hand, when a small amount of PCB oil with the volume far smaller than the total porosity in the column was supplied, the original PCBs were not transported via water permeation. However, lower-chlorinated PCB congeners-e.g., di- or tri-chlorinated biphenyls-preferentially dissolved and were infiltrated from the bottom of the column. These propensities on PCB oil infiltration can be explained in conjunction with the degree of PCB saturation in the sand column.

Influence of humidity and of the electric and magnetic microwave radiation fields on the remediation of TCE-contaminated natural sandy soils.

The influence of moisture content (15% w/w) on the remediation (vaporization) of trichloroethylene (TCE) present in natural sands, chosen as a TCE-polluted model system for soils, was investigated with regard to applied microwave power levels, the depth of the sand sample, and the dielectric factors. The heating process occurring in the sand samples arises through the microwave conduction loss heating and dielectric loss heating mechanisms. The characteristic relevance of the electric and magnetic microwave radiation fields to the heating mechanisms was also examined. Heating by the magnetic microwave radiation field was considerable when magnetite was added to the dry and wet sand samples as the microwave absorber. Optimal microwave conditions are reported for a single-mode microwave applicator. Near-quantitative elimination of the TCE contaminant was achieved for sandy soils within a very short time.