Cone Beam Computed Tomography Analysis of Root and Root Canal Morphology of First Permanent Lower Molars in a Middle East Subpopulation.

AIM: The aim of this study was to investigate variations in the number of roots and root canals in first permanent lower molars (FPLMs) using cone beam computed tomography (CBCT). MATERIALS AND METHODS: A total of 640 CBCT images were analyzed using SIDEXIS XG software version 2.62 (Sirona Dental Systems, Bensheim, Germany). The entire root anatomy of FPLMs was investigated in three dimensions and the number of roots, root canals, and the number of canals per root were recorded. Statistical analysis was performed using the Statistical Package for the Social Sciences (SPSS) software, version 24, (IBM Corporation, USA) to determine the relationship between root anatomy and gender, age, or tooth location (right or left side). RESULTS: The majority of FPLMs had two roots (96%), whereas the remaining 32 FPLMs (4%) had three roots. Almost two-thirds of the sample (62.7%) had three root canals, whereas only three cases (0.4%) of the FPLMs had six canals. When comparing bilateral differences in the distribution of root canals, it was determined that a quarter of FPLMs (24.1%) had an unequal number of canals. Moreover, there were differences in the number of additional canals between the mesial and distal roots with 17.5% of the former having three canals as compared with only 0.5% of the distal root. Interestingly, not more than one canal was observed in all additional root cases. No significant differences were observed in the number of canals between males and females or between right and left sides of the examined FPLMs (P > 0.05). CONCLUSION: Dental clinicians should be aware of the presence of an additional root in 4% of FPLMs, and about a quarter of the cases (27%) had an extra middle mesial canal in the mesial root, which was found to be more prevalent in middle age groups.

A Review of Supernumerary Teeth in the Premolar Region.

Supernumerary teeth in the premolar region, unlike other supernumeraries, occur more often in the mandible where they are generally of the supplemental type. Occasionally, they are conical or smaller than normal, particularly in the upper premolar regions. They might occur singly or in multiples, be erupted or impacted, but the majority have been found to be unerupted and asymptomatic. The prevalence of supernumerary teeth in the premolar region has been demonstrated to be between 0.01 and 1 percent depending on the population studied. Interestingly, populations from the East or Africa are known to be the most affected. Various theories have been suggested to explain the etiology of supernumerary teeth in general including both genetic and environmental factors. Furthermore, it has been suggested that supernumerary premolar teeth belong to a third (postpermanent) series, developing from extensions of the dental lamina. Several consequences can result from the presence of supernumerary premolars, especially in the mandible, such as cyst formation, transposition, and other clinical scenarios.

Clinical Monitoring of Tooth Wear Progression in Patients over a Period of One Year Using CAD/CAM.

PURPOSE: The aim of this study was to clinically monitor the progression of tooth wear over a period of 1 year in a cohort of referred tooth wear patients through the use of a computer-aided design/computer-assisted manufacture (CAD/CAM) scanner and a standardized scanning/assessment methodology. MATERIALS AND METHODS: Polyether impressions were made of 11 participants (130 teeth) at baseline and at 1 year. Impressions were poured in type IV dental stone and the anterior teeth were 3D scanned. A surface-matching software was used to compare 1-year and baseline scans and identify any dimensional differences. RESULTS: Parafunctional habits were reported by all patients. All participants exhibited tooth wear ≥ 140 µm in depth and extending to ≥ 280 µm in at least one tooth. Maxillary central incisors were the most commonly and severely affected teeth. CONCLUSION: The ability of the developed CAD/CAM scanning methodology in clinical monitoring of tooth wear was demonstrated. Further research is needed to assess its practicality in large-scale epidemiologic tooth wear studies.

Longevity of fiber-reinforced composite fixed partial dentures (FRC FPD)-Systematic review.

OBJECTIVES: to assess FRC FPDs longevity through systematically reviewing contemporary clinical evidence. Population investigated comprised patients requiring replacement of a single missing anterior/posterior tooth. Intervention was FRC FPDs. No control/comparison selected. Outcome was longevity of FRC FPDs. The focus question was: 'What is the longevity of FRC FPDs used to replace one anterior or posterior tooth in patients?' DATA: Randomised, non-randomised, controlled, prospective and retrospective clinical studies were included. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses were applied. The Overall Strength of Clinical Recommendation (OSCR) was assessed using the Strength of Recommendation Taxonomy system. Survival of FPDs was assessed using the Kaplan-Meier method. Analysis of FPD-survival according to location and occurrence of different failures was performed using Logrank and Chi-square testing. SOURCES: PubMed, MEDLINE, and Web of Science databases were searched between January 2007 and December 2015. STUDY SELECTION: Nine studies were included, involving placement of 592 FRC FPDs in 463 patients. Follow-up periods ranged between 2 months and 8 years. Kaplan-Meier overall survival probability was 94.5% (95%C.I: 92.5%-96.5%) at 4.8 years. There was no significant difference in survival probability of anterior versus posterior FRC FPDs (P=0.278). Veneering material fracture/delamination occurred significantly more than other types of failures (Ps<0.05). A meta-analysis could not be performed. OSCR was moderate. CONCLUSIONS: FRC FPDs demonstrated high overall survival with predictable performance outcomes. However, long-term performance remains unclear. CLINICAL SIGNIFICANCE: FRC FPDs are viable medium-term management alternatives for replacing single anterior or posterior teeth in patients.

A Proposed Methodology to Assess the Accuracy of 3D Scanners and Casts and Monitor Tooth Wear Progression in Patients.

PURPOSE: The aim of this study was to detail and assess the capability of a novel methodology to 3D-quantify tooth wear progression in a patient over a period of 12 months. MATERIALS AND METHODS: A calibrated stainless steel model was used to identify the accuracy of the scanning system by assessing the accuracy and precision of the contact scanner and the dimensional accuracy and stability of casts fabricated from three different types of impression materials. Thereafter, the overall accuracy of the 3D scanning system (scanner and casts) was ascertained. Clinically, polyether impressions were made of the patient's dentition at the initial examination and at the 12-month review, then poured in type IV dental stone to assess the tooth wear. The anterior teeth on the resultant casts were scanned, and images were analyzed using 3D matching software to detect dimensional variations between the patient's impressions. RESULTS: The accuracy of the 3D scanning system was established to be 33 µm. 3D clinical analysis demonstrated localized wear on the incisal and palatal surfaces of the patient's maxillary central incisors. The identified wear extended to a depth of 500 µm with a distribution of 4% to 7% of affected tooth surfaces. CONCLUSION: The newly developed 3D scanning methodology was found to be capable of assessing and accounting for the various factors affecting tooth wear scanning. Initial clinical evaluation of the methodology demonstrates successful monitoring of tooth wear progression. However, further clinical assessment is needed.

Bacteria in the adventitia of cardiovascular disease patients with and without rheumatoid arthritis.

The incidence of atherosclerosis is significantly increased in rheumatoid arthritis (RA). Infection is one factor that may be involved in the pathogenesis of both diseases. The cause of RA and atherosclerosis is unknown, and infection is one of the factors that may be involved in the pathogenesis of both diseases. The aims of this study were to identify bacteria in the aortic adventitia of patients with cardiovascular disease (CVD) in the presence and absence of RA, and to determine the effect of identified candidate pathogens on Toll-like receptor (TLR)-dependent signalling and the proinflammatory response. The aortic adventitia of 11 CVD patients with RA (RA+CVD) and 11 CVD patients without RA (CVD) were collected during coronary artery bypass graft surgery. Bacteria were detected in four samples from CVD patients and three samples from RA+CVD patients and identified by 16S rRNA gene sequencing. Methylobacterium oryzae was identified in all three RA+CVD samples, representing 44.1% of the bacterial flora. The effect of M. oryzae on TLR-dependent signalling was determined by transfection of HEK-293 cells. Although mild TLR2 signalling was observed, TLR4 was insensitive to M. oryzae. Human primary macrophages were infected with M. oryzae, and a TLDA qPCR array targeting 90 genes involved in inflammation and immune regulation was used to profile the transcriptional response. A significant proinflammatory response was observed, with many of the up-regulated genes encoding proinflammatory cytokines (IL-1α, IL-1ß, IL-6, TNF-α) and chemokines (CCR7, IL-8). The aortic adventitia of CVD patients contains a wide range of bacterial species, and the bacterial flora is significantly less diverse in RA+CVD than CVD patients. M. oryzae may stimulate an proinflammatory response that may aggravate and perpetuate the pathological processes underlying atherosclerosis in RA patients.

Identification of bacteria associated with spreading odontogenic infections by 16S rRNA gene sequencing.

OBJECTIVE: To determine the bacterial species associated with spreading odontogenic infections (SOIs). STUDY DESIGN: Pus samples from 4 cases of SOI were analyzed by microbiological culture methods for the presence of bacteria, and by polymerase chain reaction (PCR) amplification, cloning, and sequencing of bacterial 16S rRNA genes. RESULTS: Culture methods identified species from the genera Prevotella, Streptococcus, and Fusobacterium, as well as anaerobic streptococci. Molecular detection methods identified a far more diverse microflora. The predominant genus detected was Prevotella, representing 102 (50.2%) of 203 clones analyzed. Prevotella oris was the most abundant species identified, representing 45 (22.2%) of 203 clones analyzed. Twelve clones (5.9%) represented uncultivable species, namely Prevotella PUS9.180, an uncultured Peptostreptococcus species, and an uncultured bacterium belonging to the Bacteroidetes phylum. CONCLUSIONS: Prevotella species may play an important role in SOIs, and further work to examine in more detail the pathogenicity determinants of these organisms and associated host responses is warranted.