Distribution of metals in coastal sediment from northwest sabah, Malaysia.

The type of minerals in sediments control the geochemical distribution of metals which serve as an indicator of the pollution status to the marine environment. The type of minerals was determined from X-ray diffraction (XRD) and scanning electron microscope (SEM) which shows the dominance of carbonate (calcite, aragonite, dolomite), silicate (quartz) and minor clay (illite, kaolinite) minerals. The elemental concentrations were also determined using the Inductively Coupled Plasma (ICP-OES) analysis that shows the major elements Ca > Fe > Mg > Al > Mn for all locations, whereas the heavy metals differ as Ni > Cr > Zn > Co > Pb, Cr > Ni > Zn > Pb > Co and Zn > Pb > Cr > Ni, respectively. The correlation between the major elements and heavy metals were also performed using the Pearson Correlation analysis via IBM SPSS which showed the positive Al-Fe-Mn correlation with the heavy metals but negative correlation with Ca. The correlations between the elements were influenced by the adsorption and precipitation of the major minerals in the sediment. The objective of this study is to determine the geochemical distribution of metals due to the influence of minerals in the coastal sediment of Kota Belud, Kudat and Mantanani Island. Therefore, this study could serve as a geochemical baseline data to understand the abundance of metals from the coastal region of northwest Sabah, Malaysia.

Distance impacts toxic metals pollution in mining affected river sediments.

The study of metals mobility derived from mining activities in an ultramafic lithology is limited. This study investigates the effects of distance on potentially toxic metals such as Co, Cu, Fe, Mn, Ni, Pb, and Zn pollution, and the geochemical processes of fluvial system downstream of an ex-copper mine (Mamut River). The toxicity level of the river was evaluated using various sediment quality guidelines, ecotoxicological risks (ecological risk and risk index) and pollution indices. The geochemical behavior and stability of these toxic metals in the solid-phase samples were also examined. The results show that elevated concentrations of Ni, Cu, and Fe in the sediments can be linked to the adsorption and precipitation of metals from the aqueous-phase samples. We found that the metal scavenging rate as a function of distance is more evident in tropical environments than it was previously thought (10 km downstream). Such an inference could be explained by the greater amount of rainfall (pH 5.5-6.5) received in the tropics and higher weathering products that could react and form stable complexes. Geochemical analysis of the river sediment indicates that Ni, Cu, and Fe in the river sediment have increased 44-, 81-, and 90-fold compared to the background values, respectively. A significant decrease in the concentration of the potentially toxic metals was found at 5.5 km downstream. The scavenging rate of Fe is the highest (1485.82 µg g-1 km-1) followed by Cu (141.48 µg g-1 km-1), Ni (10.23 µg g-1 km-1), Pb (8.12 µg g-1 km-1) and Zn (5.01 µg g-1 km-1) in the tropical river system. In contrast, the concentration of Co and Mn in the river sediments doubled as the river flows approximately 5 km downstream due to the higher mineral solubility and weaker metal partition coefficient. This study also discusses the possibility of asbestos (mainly as chrysotile in the X-ray diffraction) as a potential hidden risk present within the ultramafic setting. This case study can be extrapolated to explain the dispersion of inorganic pollutants in an ultramafic environment in a global context.

Waste Fiber-Based Poly(hydroxamic acid) Ligand for Toxic Metals Removal from Industrial Wastewater.

Toxic metals in the industrial wastewaters have been liable for drastic pollution hence a powerful and economical treatment technology is needed for water purification. For this reason, some pure cellulosic materials were derived from waste fiber to obtain an economical adsorbent for wastewater treatment. Conversion of cellulose into grafting materials such as poly(methyl acrylate)-grafted cellulose was performed by free radical grafting process. Consequently, poly(hydroxamic acid) ligand was produced from the grafted cellulose. The intermediate products and poly(hydroxamic acid) ligand were analyzed by FT-IR, FE-SEM, TEM, EDX, and XPS spectroscopy. The adsorption capacity (qe) of some toxic metals ions by the polymer ligand was found to be excellent, e.g., copper capacity (qe) was 346.7 mg·g-1 at pH 6. On the other hand, several metal ions such as cobalt chromium and nickel also demonstrated noteworthy sorption capacity at pH 6. The adsorption mechanism obeyed the pseudo second-order rate kinetic model due to the satisfactory correlated experimental sorption values (qe). Langmuir model isotherm study showed the significant correlation coefficient with all metal ions (R2 > 0.99), indicating that the single or monolayer adsorption was the dominant mode on the surface of the adsorbent. This polymer ligand showed good properties on reusability. The result shows that the adsorbent may be recycled for 6 cycles without any dropping of starting sorption capabilities. This polymeric ligand showed outstanding toxic metals removal magnitude, up to 90-99% of toxic metal ions can be removed from industrial wastewater.

Highly Active Cellulose-Supported Poly(hydroxamic acid)-Cu(II) Complex for Ullmann Etherification.

Highly active natural pandanus-extracted cellulose-supported poly(hydroxamic acid)-Cu(II) complex 4 was synthesized. The surface of pandanus cellulose was modified through graft copolymerization using purified methyl acrylate as a monomer. Then, copolymer methyl acrylate was converted into a bidentate chelating ligand poly(hydroxamic acid) via a Loosen rearrangement in the presence of an aqueous solution of hydroxylamine. Finally, copper species were incorporated into poly(hydroxamic acid) via the adsorption process. Cu(II) complex 4 was fully characterized by Fourier transform infrared (FTIR), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray (EDX), transmission electron microscopy (TEM), inductively coupled plasma optical emission spectrometry (ICP-OES), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analyses. The cellulose-supported Cu(II) complex 4 was successfully applied (0.005 mol %) to the Ullmann etherification of aryl, benzyl halides, and phenacyl bromide with a number of aromatic phenols to provide the corresponding ethers with excellent yield [benzyl halide (70-99%); aryl halide (20-90%)]. Cu(II) complex 4 showed high stability and was easily recovered from the reaction mixture. It could be reused up to seven times without loss of its original catalytic activity. Therefore, Cu(II) complex 4 can be commercially utilized for the preparation of various ethers, and this synthetic technique could be a part in the synthesis of natural products and medicinal compounds.

Synthesis of Silica-Supported Hydroxamic Ligand for Removal of Metals Ions from Water.

Mesoporous silica supported adsorbents have been used towards metal ion removal from water due to their thermally stability and good sorption capacity. Thus, mesoporous silica-based methyl acrylate monomer (Silica-APTES-DPNO) was converted into hydroxamic acid (SBHA) by using oximation reaction and all products are analyzed by by FT-IR. The SBHA showed satisfactory binding properties with copper, cobalt, nickel and lead are 242, 206, 195 and 516 mg g-1, respectively, with the batch adsorption system was set to pH 6. The kinetics of metal ions binding obeyed the pseudo-1st-order process up to 60 min. In this study also consider the Langmuir and Freundlich isotherm to find out the sorption behavior. The isotherm study demonstrated the well fit with Freundlich isotherm (R² > 0.99). Thus, adsorption take place as a multilayer system, therefore, SBHA material is useful for the metal ions removal from water.

Genomic data of two Bacillus and two Pseudomonas strains isolated from the acid mine drainage site at Mamut Copper Mine, Ranau, Malaysia.

The genomic data of four bacteria strains isolated from the abandoned Mamut Copper Mine, an Acid Mine Drainage (AMD) site is presented in this report. Two of these strains belong to the genus Bacillus, while the other two belong to the genus Pseudomonas. The draft genome size of Pseudomonas sp. strain MCMY3 was 6,396,595 bp (GC: 63.3%), Bacillus sp. strain MCMY6 was 6,815,573 bp (GC: 35.2%), Bacillus sp. strain MCMY13 was 5,559,059 bp (GC: 35.5%) and Pseudomonas sp. strain MCMY15 was 7,381,777 bp (GC: 64.8%). These four genomes contained 493, 495, 495 and 579 annotated subsystems, respectively. The sequence data are available at GenBank sequence read archive with accessions numbers SRX7859406, SRX7859404, SRX7859405 and SRX7293032 for strains MCMY3, MCMY6, MCMY13 and MCMY15, respectively.

Polymer Ligands Derived from Jute Fiber for Heavy Metal Removal from Electroplating Wastewater.

Industrial operations, domestic and agricultural activities worldwide have had major problems with various contaminants caused by environmental pollution. Heavy metal pollution in wastewater also a prominent issue; therefore, a well built and economical treatment technology is demanded for pollution-free wastewater. The present work emphasized pure cellulose extracted from jute fiber and further modification was performed by a free radical grafting reaction, which resulted in poly(methyl acrylate) (PMA)-grafted cellulose and poly(acrylonitrile)-grafted cellulose. Subsequently, poly(hydroxamic acid) and poly(amidoxime) ligands were prepared from the PMA-grafted cellulose and PAN-grafted cellulose, respectively. An adsorption study was performed using the desired ligands with heavy metals such as copper, cobalt, chromium and nickel ions. The binding capacity (qe) with copper ions for poly(hydroxamic acid) is 352 mg g-1 whereas qe for poly(amidoxime) ligand it was exhibited as 310 mg g-1. Other metal ions (chromium, cobalt and nickel) show significance binding properties at pH 6. The Langmuir and Freundlich isotherm study was also performed. The Freundlich isotherm model showed good correlation coefficients for all metal ions, indicating that multiple-layers adsorption was occurred by the polymer ligands. The reusability was evaluated and the adsorbents can be reused for 7 cycles without significant loss of removal performance. Both ligands showed outstanding metals removal capacity from the industrial wastewater as such 98% of copper can be removed from electroplating wastewater and other metals (cobalt, chromium, nickel and lead) can also be removed up to 90%.

Poly(amidoxime) ligand derived from waste palm fiber for the removal of heavy metals from electroplating wastewater.

A waste material known as palm oil empty fruit bunch (EFB) is used as a source of cellulose for the development of polymeric materials for the removal of metal ions from industrial wastewater. A poly(acrylonitrile)-grafted palm cellulose copolymer was synthesized by a conventional free radical initiating process followed by synthesis of a poly(amidoxime) ligand by oximation reaction. The resulting products were characterized by FT-IR, FE-SEM, EDX, TGA, DSC, and XPS. The poly(amidoxime) ligand was used to coordinate with and extract a series of transition metal ions from water samples. The binding capacity (qe) of the ligand with the metal ions such as copper, iron, cobalt, nickel, and lead were 260, 210, 168, 172, and 272 mg g-1, respectively at pH 6. The adsorption process followed the pseudo-first-order kinetic model (R2 > 0.99) and as well as the Freundlich isotherm model (R2 > 0.99) indicating the occurrence of a multi-layer adsorption process in the amidoxime ligand adsorbent. Results from reusability studies show that the ligand can be recycled for at least 10 cycles without any significant losses to its initial adsorption capacity. The synthesized polymeric ligand was shown to absorb heavy metals from electroplating wastewater with up to 95% efficiency.

Application of Plasmonic Metal Nanoparticles in TiO2-SiO2 Composite as an Efficient Solar-Activated Photocatalyst: A Review Paper.

Over the last decade, interest in the utilization of solar energy for photocatalysis treatment processes has taken centre-stage. Researchers had focused on doping TiO2 with SiO2 to obtain an efficient degradation rate of various types of target pollutants both under UV and visible-light irradiation. In order to further improve this degradation effect, some researchers resorted to incorporate plasmonic metal nanoparticles such as silver and gold into the combined TiO2-SiO2 to fully optimize the TiO2-SiO2's potential in the visible-light region. This article focuses on the challenges in utilizing TiO2 in the visible-light region, the contribution of SiO2 in enhancing photocatalytic activities of the TiO2-SiO2 photocatalyst, and the ability of plasmonic metal nanoparticles (Ag and Au) to edge the TiO2-SiO2 photocatalyst toward an efficient solar photocatalyst.

Ion-Imprinted Polymer for Selective Separation of Cerium(III) Ions from Rare Earth Mixture.

Ion-imprinting polymers (IIPs) materials draw the great recognition because of the powerful selectivity to the desired metal ions. Therefore, the ion-imprinting polymer (Ce-IIP) was prepared by using cerium metal with amidoxime ligand as the complexing agent, in addition ethylene glycol dimethacrylate (EGDMA) and 2,2-azobisisobutyronitrile (AIBN) are crosslinking agent and free radical initiator, respectively. Aqueous HCl was applied to leach the cerium ions from the imprinted polymer for the creation of cavities of template, which is utilized for further cerium ions adsorption with high selectivity. The Ce-IIP was characterized by using ICP-MS, FE-SEM and also solid state analysis by UV-vis NIR spectroscopy. FT-IR study confirmed the complexation of the Ce-IIP was successful. The optimum pH was found to be 6 and the highest adsorption capacity was estimated about 145 mg g-1. Thus, the prepared Ce-IIP gave very good selectivity to cerium ions in the presence of lanthanide ions and also Ce-IIP can be reused 10 times without a substantial loss in adsorption capacity.

Adaptive Strategies of Bacillus thuringiensis Isolated from Acid Mine Drainage Site in Sabah, Malaysia.

The adaptive process in bacteria is driven by specific genetic elements which regulate phenotypic characteristics such as tolerance to high metal ion concentrations and the secretion of protective biofilms. Extreme environments such as those associated with heavy metal pollution and extremes of acidity offer opportunities to study the adaptive mechanisms of microorganisms. This study focused on the genome analysis of Bacillus thuringiensis (Bt MCMY1), a gram positive rod shaped bacterium isolated from an acid mine drainage site in Sabah, Malaysia by using a combination of Single Molecule Real Time DNA Sequencing, Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). The genome size of Bt MCMY1 was determined to be 5,458,152 bases which was encoded on a single chromosome. Analysis of the genome revealed genes associated with resistance to Copper, Mercury, Arsenic, Cobalt, Zinc, Cadmium and Aluminum. Evidence from SEM and FTIR indicated that the bacterial colonies form distinct films which bear the signature of polyhydroxyalkanoates (PHA) and this finding was supported by the genome data indicating the presence of a genetic pathway associated with the biosynthesis of PHAs. This is the first report of a Bacillus sp. isolated from an acid mine drainage site in Sabah, Malaysia and the genome sequence will provide insights into the manner in which B. thuringiensis adapts to acid mine drainage.

Assessment of heavy metals contamination in Mamut river sediments using sediment quality guidelines and geochemical indices.

This paper describes the concentration of selected heavy metals (Co, Cu, Ni, Pb, and Zn) in the Mamut river sediments and evaluate the degree of contamination of the river polluted by a disused copper mine. Based on the analytical results, copper showed the highest concentration in most of the river samples. A comparison with Interim Canadian Sediment Quality Guidelines (ICSQG) and Germany Sediment Quality Guidelines (GSQG) indicated that the sediment samples in all the sampling stations, except Mamut river control site (M1), exceeded the limit established for Cu, Ni, and Pb. On the contrary, Zn concentrations were reported well below the guidelines limit (ICSQG and GSQG). Mineralogical analysis indicated that the Mamut river sediments were primarily composed of quartz and accessory minerals such as chalcopyrite, pyrite, edenite, kaolinite, mica, and muscovite, reflected by the geological character of the study area. Enrichment factor (EF) and geoaccumulation index (Igeo) were calculated to evaluate the heavy metal pollution in river sediments. Igeo values indicated that all the sites were strongly polluted with the studied metals in most sampling stations, specifically those located along the Mamut main stream. The enrichment factor with value greater than 1.5 suggested that the source of heavy metals was mainly derived from anthropogenic activity such as mining. The degree of metal changes (δfold) revealed that Cu concentration in the river sediments has increased as much as 20 to 38 folds since the preliminary investigation conducted in year 2004.