ABSTRACT
Bio-inspired surfaces that exhibit high contact angle and low contact angle hysteresis for various liquids and demonstrate mechanical durability and anti-smudge properties are of interest for various applications. The fabrication of such surfaces has often involved complex or expensive processes, required techniques that may not be suitable for various substrates and particles, may require surface post-treatment, or may lack durability. Dual layered coatings of roughness-induced superomniphobic surfaces that demonstrate good mechanical durability were fabricated on glass substrates using hydrophobic SiO2 nanoparticles and low surface energy fluorobinders using dip coating and spray coating techniques. The particle-to-binder ratio was optimized for contact angles of interest. The mechanical durability of these coatings was examined under mechanical rubbing action. The anti-smudge properties were examined by wiping an artificially contaminated coating using oil-impregnated microfiber cloth.
Subject(s)
Nanoparticles/chemistry , Polymers/chemistry , Silicon Dioxide/chemistry , Hydrophobic and Hydrophilic Interactions , Surface Properties , WettabilityABSTRACT
This work reports on thermally tunable surface wettability of electrospun fiber mats of: polystyrene (PS)/poly(N-isopropylacrylamide) (PNIPA) blended (bl-PS/PNIPA) and crosslinked poly[(N-isopropylacrylamide)-co-[methacrylic acid)] (PNIPAMAA) (xl-NIPAMAA). Both the bl-PS/PNIPA and xl-PNIPAMAA fiber mats demonstrate reversibly switchable surface wettability, with the bl-PS/PNIPA fiber mats approaching superhydrophobic ≥150° and superhydrophilic contact angle (CA) values at extreme temperatures. Weight loss studies carried out at 10 °C indicate that the crosslinked PNIPAMAA fiber mats had better structural integrity than the bl-PS/PNIPA fiber mats. PNIPA surface chemistry and the Cassie-Baxter model were used to explain the mechanism behind the observed extreme wettability.
Subject(s)
Acrylamides/chemistry , Cross-Linking Reagents/chemistry , Methacrylates/chemistry , Polymers/chemistry , Polystyrenes/chemistry , Acrylic Resins , Polymers/chemical synthesis , Surface Properties , Temperature , WettabilityABSTRACT
This work reports the coaxial electrospinning of poly(vinylidene fluoride) (PVDF)-Teflon amorphous fluoropolymer (AF) and Teflon AF-PVDF core-sheath nanofiber mats yielding superhydrophobic properties. The coaxial electrospinning configuration allows for the electrospinning of Teflon AF, a nonelectrospinnable polymer, with the help of an electrospinnable PVDF polymer. PVDF-Teflon AF and Teflon AF-PVDF core-sheath fibers have been found to a have mean fiber diameter ranging from 400 nm to less than 100 nm. TEM micrographs exhibit a typical core-sheath fiber structure for these fibers, where the sheath fiber coats the core fiber almost thoroughly. Water contact angle measurements by sessile drop method on these core-sheath nanofiber mats exhibited superhydrophobic characteristics with contact angles close to or higher than 150 degrees. Surprisingly, PVDF-Teflon AF and Teflon AF-PVDF nanofiber mat surface properties were dominated by the fiber dimensions and less influenced by the type of sheath polymer. This suggests that highly fluorinated polymer Teflon AF does not advance the hydrophobicity beyond what surface physics and slightly fluorinated polymer PVDF can achieve. It is concluded that PVDF-Teflon AF and Teflon AF-PVDF core-sheath electrospun nanofiber mats may be used in lithium (Li)-air batteries.
