GTP-dependent formation of straight tubulin oligomers leads to microtubule nucleation.

Nucleation of microtubules (MTs) is essential for cellular activities, but its mechanism is unknown because of the difficulty involved in capturing rare stochastic events in the early stage of polymerization. Here, combining rapid flush negative stain electron microscopy (EM) and kinetic analysis, we demonstrate that the formation of straight oligomers of critical size is essential for nucleation. Both GDP and GTP tubulin form single-stranded oligomers with a broad range of curvatures, but upon nucleation, the curvature distribution of GTP oligomers is shifted to produce a minor population of straight oligomers. With tubulin having the Y222F mutation in the ß subunit, the proportion of straight oligomers increases and nucleation accelerates. Our results support a model in which GTP binding generates a minor population of straight oligomers compatible with lateral association and further growth to MTs. This study suggests that cellular factors involved in nucleation promote it via stabilization of straight oligomers.

Affinity Purification and Characterization of Functional Tubulin from Cell Suspension Cultures of Arabidopsis and Tobacco.

Microtubules assemble into several distinct arrays that play important roles in cell division and cell morphogenesis. To decipher the mechanisms that regulate the dynamics and organization of this versatile cytoskeletal component, it is essential to establish in vitro assays that use functional tubulin. Although plant tubulin has been purified previously from protoplasts by reversible taxol-induced polymerization, a simple and efficient purification method has yet to be developed. Here, we used a Tumor Overexpressed Gene (TOG) column, in which the tubulin-binding domains of a yeast (Saccharomyces cerevisiae) TOG homolog are immobilized on resin, to isolate functional plant tubulin. We found that several hundred micrograms of pure tubulin can readily be purified from cell suspension cultures of tobacco (Nicotiana tabacum) and Arabidopsis (Arabidopsis thaliana). The tubulin purified by the TOG column showed high assembly competence, partly because of low levels of polymerization-inhibitory phosphorylation of α-tubulin. Compared with porcine brain tubulin, Arabidopsis tubulin is highly dynamic in vitro at both the plus and minus ends, exhibiting faster shrinkage rates and more frequent catastrophe events, and exhibits frequent spontaneous nucleation. Furthermore, our study shows that an internal histidine tag in α-tubulin can be used to prepare particular isotypes and specifically engineered versions of α-tubulin. In contrast to previous studies of plant tubulin, our mass spectrometry and immunoblot analyses failed to detect posttranslational modification of the isolated Arabidopsis tubulin or detected only low levels of posttranslational modification. This novel technology can be used to prepare assembly-competent, highly dynamic pure tubulin from plant cell cultures.

Reversal of axonal growth defects in an extraocular fibrosis model by engineering the kinesin-microtubule interface.

Mutations in human ß3-tubulin (TUBB3) cause an ocular motility disorder termed congenital fibrosis of the extraocular muscles type 3 (CFEOM3). In CFEOM3, the oculomotor nervous system develops abnormally due to impaired axon guidance and maintenance; however, the underlying mechanism linking TUBB3 mutations to axonal growth defects remains unclear. Here, we investigate microtubule (MT)-based motility in vitro using MTs formed with recombinant TUBB3. We find that the disease-associated TUBB3 mutations R262H and R262A impair the motility and ATPase activity of the kinesin motor. Engineering a mutation in the L12 loop of kinesin surprisingly restores a normal level of motility and ATPase activity on MTs carrying the R262A mutation. Moreover, in a CFEOM3 mouse model expressing the same mutation, overexpressing the suppressor mutant kinesin restores axonal growth in vivo. Collectively, these findings establish the critical role of the TUBB3-R262 residue for mediating kinesin interaction, which in turn is required for normal axonal growth and brain development.

A flipped ion pair at the dynein-microtubule interface is critical for dynein motility and ATPase activation.

Dynein is a motor protein that moves on microtubules (MTs) using the energy of adenosine triphosphate (ATP) hydrolysis. To understand its motility mechanism, it is crucial to know how the signal of MT binding is transmitted to the ATPase domain to enhance ATP hydrolysis. However, the molecular basis of signal transmission at the dynein-MT interface remains unclear. Scanning mutagenesis of tubulin identified two residues in α-tubulin, R403 and E416, that are critical for ATPase activation and directional movement of dynein. Electron cryomicroscopy and biochemical analyses revealed that these residues form salt bridges with the residues in the dynein MT-binding domain (MTBD) that work in concert to induce registry change in the stalk coiled coil and activate the ATPase. The R403-E3390 salt bridge functions as a switch for this mechanism because of its reversed charge relative to other residues at the interface. This study unveils the structural basis for coupling between MT binding and ATPase activation and implicates the MTBD in the control of directional movement.

Overexpression, purification, and functional analysis of recombinant human tubulin dimer.

Microtubules consisting of tubulin dimers play essential roles in various cellular functions. Investigating the structure-function relationship of tubulin dimers requires a method to prepare sufficient quantities of recombinant tubulin. To this end, we simultaneously expressed human α1- and ß3-tubulin using a baculovirus-insect cell expression system that enabled the purification of 5mg recombinant tubulin per litre of cell culture. The purified recombinant human tubulin could be polymerized into microtubules that glide on a kinesin-coated glass surface. The method provides a powerful tool for in vitro functional analyses of microtubules.

Preparation of dual-color polarity-marked fluorescent microtubule seeds.

Assaying microtubule dynamics in vitro requires stabilized nucleation centers, a method to immobilize individual microtubules onto a surface, and a specialized microscope to image the microtubule. Microtubules are polar structures with different dynamic properties at the plus and minus ends. However, the dynamics of the two ends can be modified by the addition of other proteins, such as microtubule plus-end-tracking proteins (+TIPs), so that it becomes impossible to distinguish the microtubule polarity by measuring the differences in the dynamic properties of the ends alone. In this chapter, we describe a method for labeling tubulin protein with N-hydroxysuccinimide ester fluorescent dyes, enabling the formation of dual-color polarity-marked stable microtubule seeds that can be immobilized onto a microscopic cover glass for imaging by fluorescence microscopy. These seeds create functional nucleation centers for the growth of dynamic microtubules.

One-dimensional Brownian motion of charged nanoparticles along microtubules: a model system for weak binding interactions.

Various proteins are known to exhibit one-dimensional Brownian motion along charged rodlike polymers, such as microtubules (MTs), actin, and DNA. The electrostatic interaction between the proteins and the rodlike polymers appears to be crucial for one-dimensional Brownian motion, although the underlying mechanism has not been fully clarified. We examined the interactions of positively-charged nanoparticles composed of polyacrylamide gels with MTs. These hydrophilic nanoparticles bound to MTs and displayed one-dimensional Brownian motion in a charge-dependent manner, which indicates that nonspecific electrostatic interaction is sufficient for one-dimensional Brownian motion. The diffusion coefficient decreased exponentially with an increasing particle charge (with the exponent being 0.10 kBT per charge), whereas the duration of the interaction increased exponentially (exponent of 0.22 kBT per charge). These results can be explained semiquantitatively if one assumes that a particle repeats a cycle of binding to and movement along an MT until it finally dissociates from the MT. During the movement, a particle is still electrostatically constrained in the potential valley surrounding the MT. This entire process can be described by a three-state model analogous to the Michaelis-Menten scheme, in which the two parameters of the equilibrium constant between binding and movement, and the rate of dissociation from the MT, are derived as a function of the particle charge density. This study highlights the possibility that the weak binding interactions between proteins and rodlike polymers, e.g., MTs, are mediated by a similar, nonspecific charge-dependent mechanism.

Key residues on microtubule responsible for activation of kinesin ATPase.

Microtubule (MT) binding accelerates the rate of ATP hydrolysis in kinesin. To understand the underlying mechanism, using charged-to-alanine mutational analysis, we identified two independent sites in tubulin, which are critical for kinesin motility, namely, a cluster of negatively charged residues spanning the helix 11-12 (H11-12) loop and H12 of alpha-tubulin, and the negatively charged residues in H12 of beta-tubulin. Mutation in the alpha-tubulin-binding site results in a deceleration of ATP hydrolysis (k(cat)), whereas mutation in the beta-tubulin-binding site lowers the affinity for MTs (K(0.5)MT). The residue E415 in alpha-tubulin seems to be important for coupling MT binding and ATPase activation, because the mutation at this site results in a drastic reduction in the overall rate of ATP hydrolysis, largely due to a deceleration in the reaction of ADP release. Our results suggest that kinesin binding at a region containing alpha-E415 could transmit a signal to the kinesin nucleotide pocket, triggering its conformational change and leading to the release of ADP.

Identification of a strong binding site for kinesin on the microtubule using mutant analysis of tubulin.

The kinesin-binding site on the microtubule has not been identified because of the technical difficulties involved in the mutant analyses of tubulin. Exploiting the budding yeast expression system, we succeeded in replacing the negatively charged residues in the alpha-helix 12 of beta-tubulin with alanine and analyzed their effect on kinesin-microtubule interaction in vitro. The microtubule gliding assay showed that the affinity of the microtubules for kinesin was significantly reduced in E410A, D417A, and E421A, but not in E412A mutant. The unbinding force measurement revealed that in the former three mutants, the kinesin-microtubule interaction in the adenosine 5'-[beta,gamma-imido]triphosphate state (AMP-PNP state) became less stable when a load was imposed towards the microtubule minus end. In parallel with this decreased stability, the stall force of kinesin was reduced. Our results implicate residues E410, D417, and E421 as crucial for the kinesin-microtubule interaction in the strong binding state, thereby governing the size of kinesin stall force.

Dielectric measurement of individual microtubules using the electroorientation method.

Little is known about the electrostatic/dynamic properties of microtubules, which are considered to underlie their electrostatic interactions with various proteins such as motor proteins, microtubule-associated proteins, and microtubules themselves (lateral association of microtubules). To measure the dielectric properties of microtubules, we developed an experiment system in which the electroorientation of microtubules was observed under a dark-field microscope. Upon application of an alternating electric field (0.5-1.9 x 10(5) V/m, 10 kHz-3 MHz), the microtubules were oriented parallel to the field line in a few seconds because of the dipole moment induced along their long axes. The process of this orientation was analyzed based on a dielectric ellipsoid model, and the conductivity and dielectric constant of each microtubule were calculated. The analyses revealed that the microtubules were highly conductive, which is consistent with the counterion polarization model-counterions bound to highly negatively charged microtubules can move along the long axis, and this mobility might be the origin of the high conductivity. Our experiment system provides a useful tool to quantitatively evaluate the polyelectrolyte nature of microtubules, thus paving the way for future studies aiming to understand the physicochemical mechanism underlying the electrostatic interactions of microtubules with various proteins.

Long-range cooperative binding of kinesin to a microtubule in the presence of ATP.

Interaction of kinesin-coated latex beads with a single microtubule (MT) was directly observed by fluorescence microscopy. In the presence of ATP, binding of a kinesin bead to the MT facilitated the subsequent binding of other kinesin beads to an adjacent region on the MT that extended for micrometers in length. This cooperative binding was not observed in the presence of ADP or 5'-adenylylimidodiphosphate (AMP-PNP), where binding along the MT was random. Cooperative binding also was induced by an engineered, heterodimeric kinesin, WT/E236A, that could hydrolyze ATP, yet remained fixed on the MT in the presence of ATP. Relative to the stationary WT/E236A kinesin on a MT, wild-type kinesin bound preferentially in close proximity, but was biased to the plus-end direction. These results suggest that kinesin binding and ATP hydrolysis may cause a long-range state transition in the MT, increasing its affinity for kinesin toward its plus end. Thus, our study highlights the active involvement of MTs in kinesin motility.