ABSTRACT
The purpose of this in vitro study was to evaluate the surface and resin-dentine interface characteristics of permanent tooth dentine cut with diamond or carbide burs and treated with phosphoric acid (PA) or an acidic conditioner. Labial surfaces of permanent incisors were prepared into dentine with high-speed carbide or diamond burs and divided into two halves. Phosphoric acid 36% was applied on one half and non-rinse conditioner (NRC) was applied on the other half. Ten randomly selected scanning electron microscopy (SEM) fields from each specimen (n = 15) were evaluated. Occlusal surfaces of third molars were divided in two halves for evaluation of the resin-dentine interface. The halves were randomly assigned to one of each conditioner and restored with Prime & Bond NT/Spectrum. Ten specimens were analysed by SEM to evaluate hybrid layer formation and interfacial seal. We observed that surfaces prepared with carbide bur presented less residual smear plugs (P < 0.05) than surfaces prepared with diamond burs. Surfaces conditioned with NRC, which is a smear layer modifier, presented more residual smear plugs than surfaces conditioned with PA (P < 0.05). Treatment with PA resulted in more sealed interfaces than specimens treated with NRC. Within the limitations of this study the results showed that carbide burs leave a surface that is more conducive to bonding than diamond burs.
Subject(s)
Dental Caries/pathology , Dental Cavity Preparation/methods , Dental Restoration, Permanent/methods , Dentin/ultrastructure , Acid Etching, Dental , Carbon , Dental Cavity Preparation/instrumentation , Dental Restoration, Permanent/instrumentation , Humans , Incisor , Maleates , Microscopy, Electron, Scanning , Phosphoric Acids , Random Allocation , Smear LayerABSTRACT
The aim of this in vitro study was to evaluate marginal leakage in class V restorations in primary teeth restored with amalgam, using three different techniques. Thirty maxillary anterior primary teeth, clinically sound and naturally exfoliated, were used. In group 1 (n = 10), two thin layers of a copal varnish (Cavitine) were applied. In group 2 (n = 10), Scotchbond Multi-Purpose Plus, a dual adhesive system, was used according to manufacturer instructions. In group 3 (n = 10), One-Step adhesive system in combination with a low-viscosity resin (Resinomer) were used according to manufacturer instructions. All samples were restored with a high-copper dental amalgam alloy (GS 80, SDI). After restoration, the samples were stored in normal saline at 37 degrees C for 72 h. The specimens were polished, thermocycled (500 cycles, 5 degrees and 55 degrees C, 30-s dwell time) and impermeabilized with fingernail polish to within 1.0 mm of the restoration margins. The teeth were then placed in 0.5% methylene blue for 4 h. Finally, the samples were sectioned and evaluated for marginal leakage. The Kruskal-Wallis test showed that the filled adhesive resin (group 3) had the least microleakage. There was no significant difference between groups 1 and 2.
Subject(s)
Dental Amalgam , Dental Bonding/methods , Dental Leakage/prevention & control , Dental Restoration, Permanent/methods , Tooth, Deciduous , Composite Resins , Dental Cavity Lining , Dental Materials , Dentin-Bonding Agents , Humans , Incisor , Maxilla , Methacrylates , Resin Cements , Resins, Plant , Statistics, NonparametricABSTRACT
PURPOSE: To evaluate with the scanning electron microscope (SEM) the effects of a pulsed Nd: YAG laser on the occlusal surface of human premolars in vitro. MATERIALS AND METHODS: Twenty normal premolars extracted for orthodontic reasons were used and separated in two groups. Group 1 received the irradiation at 2.0 watts, repetition rate of 20 Hz and 124.3 J/cm2 of energy density during 3 minutes, on the occlusal fissure. Group 2 received the laser irradiation in only half of the fissure. RESULTS: The SEM analysis revealed that in the case of shallow fissures the sealing was total but in narrow and deep fissure the sealing was partial or was in complete.
Subject(s)
Dental Enamel/radiation effects , Dental Fissures/radiotherapy , Lasers , Bicuspid , Humans , Laser Therapy , Microscopy, Electron, Scanning , NeodymiumABSTRACT
A estrutura de esmalte aprismático de fissuras de premolares humanos foi observada através de superfícies fraturadas vestíbulo-lingualmente. Os resultados mostraram que a camada aprismática margeia a superfície da fissura em toda extensão. A espessura da camada aprismática é aumentada na porção média da fissura a qual é semelhante aquela encontrada nas superfícies vestibular e lingual. Os cristais de hidroxiapatita dispondo-se paralelamente são claramente vistos em aspectos tridimensionais
