Laboratory Evaluation of Shell Add-On Products for American Football Helmets for Professional Linemen.

The Guardian Cap NXT (GC NXT) and the ProTech Helmet Cap (ProTech) are commercially available aftermarket products designed to augment the energy attenuation characteristics of American football helmets. The ability of these helmet shell add-on products to mitigate the severity of impacts typically experienced by professional offensive and defensive linemen was evaluated for seven helmet models using two test series. In linear impactor tests, the GC NXT reduced head impact severity as measured by the head acceleration response metric (HARM) by 9% relative to the helmets only, while the ProTech reduced HARM by 5%. While both products significantly improved the performance of the football helmets tested overall, effects varied by impact condition and helmet model with the add-ons worsening helmet performance in some conditions. The GC NXT had a strong effect size (Cohen's d = 0.8) whereas the ProTech had a medium effect (Cohen's d = 0.5). A second study investigated add-on performance for helmet-to-helmet impacts with eccentric impact vectors and resulted in a mixture of increased and decreased HARM when either add-on was placed on one or both helmets. Estimated risk for serious neck injury with add-ons and without differed by less than 4% for these eccentric impacts.

Comparison of Laboratory and On-Field Performance of American Football Helmets.

The relationship between laboratory and on-field performance of football helmets was assessed for 31 football helmet models selected from those worn by players in the 2015-2019 National Football League (NFL) seasons. Linear impactor tests were conducted with helmets placed on an instrumented Hybrid III head and neck assembly mounted on a sliding table. Based on impacts to each helmet at six impact locations and three velocities, a helmet performance score (HPS) was calculated using a linear combination of the head injury criterion (HIC) and the diffuse axonal multi-axis general evaluation (DAMAGE). To determine the on-field performance of helmets, helmet model usage, player participation, and incident concussion data were collected from the five NFL seasons and used to calculate helmet model-specific concussion rates. Comparison of laboratory HPS to the helmet model-specific concussion rates on a per play basis showed a positive correlation (r2 = 0.61, p < 0.001) between laboratory and on-field performance of helmet models, indicating that helmets which exhibited reduced impact severity in the laboratory tests were also generally associated with lower concussion rates on-field. Further analysis showed that NFL-prohibited helmet models exhibited a significantly higher odds of concussion (OR 1.24; 95% CI 1.04-1.47; p = 0.017) relative to other helmet models.

Development and Evaluation of a Test Method for Assessing the Performance of American Football Helmets.

As more is learned about injury mechanisms of concussion and scenarios under which injuries are sustained in football games, methods used to evaluate protective equipment must adapt. A combination of video review, videogrammetry, and laboratory reconstructions was used to characterize concussive impacts from National Football League games during the 2015-2017 seasons. Test conditions were generated based upon impact locations and speeds from this data set, and a method for scoring overall helmet performance was created. Head kinematics generated using a linear impactor and sliding table fixture were comparable to those from laboratory reconstructions of concussive impacts at similar impact conditions. Impact tests were performed on 36 football helmet models at two laboratories to evaluate the reproducibility of results from the resulting test protocol. Head acceleration response metric, a head impact severity metric, varied 2.9-5.6% for helmet impacts in the same lab, and 3.8-6.0% for tests performed in a separate lab when averaged by location for the models tested. Overall inter-lab helmet performance varied by 1.1 ± 0.9%, while the standard deviation in helmet performance score was 7.0%. The worst helmet performance score was 33% greater than the score of the best-performing helmet evaluated by this study.

Position-Specific Circumstances of Concussions in the NFL: Toward the Development of Position-Specific Helmets.

Consideration of position-specific features of the NFL concussion environment could enable improved risk mitigation through the design of position-specific helmets to improve self-protection as well as protection for the other player with whom the contact occurs. The purpose of this paper is to quantify position-specific features of scenarios resulting in concussions to NFL players, and the players they contact, by reviewing all game footage (broadcast and non-broadcast) over 4 seasons. Position-specific features were documented for 647 concussions in which a primary exposure could be visualized, including impact source, helmet impact location, activity, and the other player with whom the contact occurred. Findings include the over-representation of helmet-to-ground impacts to the rear of the quarterback's helmet, the high frequency of impacts to the side (upper) location of both concussed players and the players they contacted regardless of position, and distinct differences in the circumstances of concussions to cornerbacks and safeties. The study shows that some features of concussion scenarios are common to all positions, but several position-specific features exist and can inform the design of position-specific helmets for NFL players.

The biomechanics of concussive helmet-to-ground impacts in the National Football league.

This paper presents a detailed characterization of helmet-to-ground impacts in the National Football League. Video analysis was performed for 16 head-to-ground impacts that caused concussions. Average resultant closing velocity was 8.3 m/s at an angle nearly 45° to the surface. Preimpact rotational velocity of the helmet ranged from negligible to as high as 54.1 rad/s. Helmet impacts were concentrated on the posterior and lateral aspects. To study the interaction in greater detail, a helmeted anthropomorphic test device (ATD) was launched over a football field and fell to the ground in various impact conditions. Substantial decoupling between the helmet and the head was observed, such that the head rebounded within the helmet and underwent changes in linear and rotational motion greater than those of the helmet. Vertical helmet rebound was also observed; the helmet underwent a change in vertical velocity on average 24% greater than the vertical component of its closing velocity. Frictional interaction between the helmet and the ground surface caused the helmet to undergo an average horizontal change in velocity of 57% of the horizontal component of its closing velocity. Finally, the duration of a helmet-to-ground impact was generally in the range of 15 - 30 ms, suggesting that the impact surface provides little ride-down. Lengthening this duration could be beneficial both by reducing the peak linear and rotational acceleration and by shifting the impact toward a time regime where brain strain is related to rotational acceleration rather than rotational velocity.

Facilitating translational team science: The project leader model.

Project management expertise is employed across many professional sectors, including clinical research organizations, to ensure that efforts undertaken by the organization are completed on time and according to specifications and are capable of achieving the needed impact. Increasingly, project leaders (PLs) who possess this expertise are being employed in academic settings to support clinical and preclinical translational research team science. Duke University's clinical and translational science enterprise has been an early adopter of project management to support clinical and preclinical programs. We review the history and evolution of project management and the PL role at Duke, examine case studies that illustrate their growing value to our academic research environment, and address challenges and solutions to employing project management in academia. Furthermore, we describe the critical role project leadership plays in accelerating and increasing the success of translational team science and team approaches frequently required for systems biology and "big data" scientific studies. Finally, we discuss perspectives from Duke project leadership professionals regarding the training needs and requirements for PLs working in academic clinical and translational science research settings.

The response of the pediatric head to impacts onto a rigid surface.

The study of pediatric head injury relies heavily on the use of finite element models and child anthropomorphic test devices (ATDs). However, these tools, in the context of pediatric head injury, have yet to be validated due to a paucity of pediatric head response data. The goal of this study is to investigate the response and injury tolerance of the pediatric head to impact. Twelve pediatric heads were impacted in a series of drop tests. The heads were dropped onto five impact locations (forehead, occiput, vertex and right and left parietal) from drop heights of 15 and 30 cm. The head could freely fall without rotation onto a flat 19 mm thick platen. The impact force was measured using a 3-axis piezoelectric load cell attached to the platen. Age and drop height were found to be significant factors in the impact response of the pediatric head. The head acceleration (14%-15 cm; 103-30 cm), Head Injury Criterion (HIC) (253%-15 cm; 154%-30 cm) and impact stiffness (5800%-15 cm; 3755%-30 cm) when averaged across all impact locations increased with age from 33 weeks gestation to 16 years, while the pulse duration (66%-15 cm; 53%-30 cm) decreased with age. Increases in head acceleration, HIC and impact stiffness were also observed with increased drop height, while pulse duration decreased with increased drop height. One important observation was that three of the four cadaveric heads between the ages of 5-months and 22-months sustained fractures from the 15 cm and 30 cm drop heights. The 5-month-old sustained a right parietal linear fracture while the 11- and 22-month-old sustained diastatic linear fractures.

On the relative importance of bending and compression in cervical spine bilateral facet dislocation.

BACKGROUND: Cervical bilateral facet dislocations are among the most devastating spine injuries in terms of likelihood of severe neurological sequelae. More than half of patients with tetraparesis had sustained some form of bilateral facet fracture dislocation. They can occur at any level of the sub-axial cervical spine, but predominate between C5 and C7. The mechanism of these injuries has long been thought to be forceful flexion of the chin towards the chest. This "hyperflexion" hypothesis comports well with intuition and it has become dogma in the clinical literature. However, biomechanical studies of the human cervical spine have had little success in producing this clinically common and devastating injury in a flexion mode of loading. METHODS: The purpose of this manuscript is to review the clinical and engineering literature on the biomechanics of bilateral facet dislocations and to describe the mechanical reasons for the causal role of compression, and the limited role of head flexion, in producing bilateral facet dislocations. FINDINGS: Bilateral facet dislocations have only been produced in experiments where compression is the primary loading mode. To date, no biomechanical study has produced bilateral facet dislocations in a whole spine by bending. Yet the notion that it is primarily a hyper-flexion injury persists in the clinical literature. INTERPRETATION: Compression and compressive buckling are the primary causes of bilateral facet dislocations. It is important to stop using the hyper-flexion nomenclature to describe this class of cervical spines injuries because it may have a detrimental effect on designs for injury prevention.

Video Analysis of Reported Concussion Events in the National Football League During the 2015-2016 and 2016-2017 Seasons.

BACKGROUND: Concussions in American football remain a high priority of sports injury prevention programs. Detailed video review provides important information on causation, the outcomes of rule changes, and guidance on future injury prevention strategies. PURPOSE: Documentation of concussions sustained in National Football League games played during the 2015-2016 and 2016-2017 seasons, including consideration of video views unavailable to the public. STUDY DESIGN: Descriptive epidemiology study. METHODS: All reported concussions were reviewed with all available video footage. Standardized terminology and associated definitions were developed to describe and categorize the details of each concussion. RESULTS: Cornerbacks sustained the most concussions, followed by wide receivers, then linebackers and offensive linemen. Half (50%) of concussions occurred during a passing play, 28% during a rushing play, and 21% on a punt or kickoff. Tackling was found to be the most common activity of concussed players, with the side of the helmet the most common helmet impact location. The distribution of helmet impact source-the object that contacted the concussed player's helmet-differed from studies of earlier seasons, with a higher proportion of helmet-to-body impacts (particularly shoulder) and helmet-to-ground impacts and with a lower proportion of helmet-to-helmet impacts. Helmet-to-ground concussive impacts were notable for the high prevalence of impacts to the back of the helmet and their frequency during passing plays. CONCLUSION: Concussion causation scenarios in the National Football League have changed over time. CLINICAL RELEVANCE: The results of this study suggest the need for expanded evaluation of concussion countermeasures beyond solely helmet-to-helmet test systems, including consideration of impacts with the ground and with the body of the opposing player. It also suggests the possibility of position-specific countermeasures as part of an ongoing effort to improve safety.

The compressive stiffness of human pediatric heads.

Head injury is a persistent and costly problem for both children and adults. Globally, approximately 10 million people are hospitalized each year for head injuries. Knowing the structural properties of the head is important for modeling the response of the head in impact, and for providing insights into mechanisms of head injury. Hence, the goal of this study was to measure the sub-injurious structural stiffness of whole pediatric heads. 12 cadaveric pediatric (20-week-gestation to 16 years old) heads were tested in a battery of viscoelastic compression tests. The heads were compressed in both the lateral and anterior-posterior directions to 5% of gauge length at normalized deformation rates of 0.0005/s, 0.01/s, 0.1/s, and 0.3/s. Because of the non-linear nature of the response, linear regression models were used to calculate toe region (<2.5%) and elastic region (>2.5%) stiffness separately so that meaningful comparisons could be made across rate, age, and direction. The results showed that age was the dominant factor in predicting the structural stiffness of the human head. A large and statistically significant increase in the stiffness of both the toe region and the elastic region was observed with increasing age (p<0.0001), but no significant difference was seen across direction or normalized deformation rate. The stiffness of the elastic region increased from as low as 5 N/mm in the neonate to >4500 N/mm in the 16 year old. The changes in stiffness with age may be attributed to the disappearance of soft sutures and the thickening of skull bones with age.

The response of the adult and ATD heads to impacts onto a rigid surface.

Given the high incidence of TBI, head injury has been studied extensively using both cadavers and anthropomorphic test devices (ATDs). However, few studies have benchmarked the response of ATD heads against human data. Hence, the objective of this study is to investigate the response of adult and ATD heads in impact, and to compare adult Hybrid III head responses to the adult head responses. In this study, six adult human heads and seven ATD heads were used to obtain impact properties. The heads were dropped from both 15cm and 30cm onto five impact locations: right and left parietal, forehead, occiput and vertex. One set of drops were performed on the human heads and up to four sets were carried out on the ATD heads. For each drop, the head was placed into a fine net and positioned to achieve the desired drop height and impact location. The head was then released to allow free fall without rotation onto a flat aluminum 34 -inch thick platen. The platen was attached to a three-axis piezoelectric load cell to measure the impact force. The peak resultant acceleration, head impact criterion (HIC) and impact stiffness were calculated using the force/time curve and drop mass. No statistical differences were found between the adult human heads and the adult Hybrid III head for 15cm and 30cm impacts (p>0.05). For the human heads, the mid-sagittal impact locations produced the highest HIC and peak acceleration values. The parietal impacts produced HICs and peak accelerations that were 26-48% lower than those from the mid-sagittal impacts. For the ATD heads, the acceleration and HIC values generally increased with represented age, except for the Q3, which produced HIC values up to higher than the other ATD heads. The impact responses of the adult Hybrid III onto different impact locations were found to adequately represent the impact stiffness of human adult head impacts from 30cm and below onto a rigid surface. The Q3 dummy consistently produced the highest HIC values of the ATD heads, and produced higher acceleration and HIC values than the adult human heads as well, which is contrary to neonatal data demonstrating that the head acceleration increases with age.

Pediatric head and neck dynamics in frontal impact: analysis of important mechanical factors and proposed neck performance corridors for 6- and 10-year-old ATDs.

OBJECTIVE: Traumatic injuries are the leading cause of death of children aged 1-19 in the United States and are principally caused by motor vehicle collisions, with the head being the primary region injured. The neck, though not commonly injured, governs head kinematics and thus influences head injury. Vehicle improvements necessary to reduce these injuries are evaluated using anthropomorphic testing devices (ATDs). Current pediatric ATD head and neck properties were established by scaling adult properties using the size differences between adults and children. Due to the limitations of pediatric biomechanical research, computational models are the only available methods that combine all existing data to produce injury-relevant biofidelity specifications for ATDs. The purpose of this study is to provide the first frontal impact biofidelity corridors for neck flexion response of 6- and 10-year-olds using validated computational models, which are compared to the Hybrid III (HIII) ATD neck responses and the Mertz flexion corridors. METHODS: Our virtual 6- and 10-year-old head and neck multibody models incorporate pediatric biomechanical properties obtained from pediatric cadaveric and radiological studies, include the effect of passive and active musculature, and are validated with data including pediatric volunteer 3 g dynamic frontal impact responses. We simulate ATD pendulum tests-used to calibrate HIII neck bending stiffness-to compare the pediatric model and HIII ATD neck bending stiffness and to compare the model flexion bending responses with the Mertz scaled neck flexion corridors. Additionally, pediatric response corridors for pendulum calibration tests and high-speed (15 g) frontal impacts are estimated through uncertainty analyses on primary model variables, with response corridors calculated from the average ± SD response over 650 simulations. RESULTS AND CONCLUSIONS: The models are less stiff in dynamic anterioposterior bending than the ATDs; the secant stiffness of the 6- and 10-year-old models is 53 and 67 percent less than that of the HIII ATDs. The ATDs exhibit nonlinear stiffening and the models demonstrate nonlinear softening. Consequently, the models do not remain within the Mertz scaled flexion bending corridors. The more compliant model necks suggest an increased potential for head impact via larger head excursions. The pediatric anterioposterior bending corridors developed in this study are extensible to any frontal loading condition through calculation and sensitivity analysis. The corridors presented in this study are the first based on pediatric cadaveric data and provide the basis for future, more biofidelic, designs of 6- and 10-year-old ATD necks.

Three-dimensional adult male head and skull contours.

OBJECTIVE: Traumatic brain injury (TBI) is a major public health issue, affecting millions of people annually. Anthropomorphic test devices (ATDs) and finite element models (FEMs) provide a means of understanding factors leading to TBI, potentially reducing the occurrence. Thus, there is a need to ensure that these tools accurately model humans. For example, the Hybrid III was not based on 3-dimensional human head shape data. The objective of this study is to produce average head and skull contours for an average U.S. male that can be used for ATDs and FEMs. METHODS: Computed tomography (CT) scans of adult male heads were obtained from a database provided by the University of Virginia Center for Applied Biomechanics. An orthographic viewer was used to extract head and skull contours from the CT scans. Landmarks were measured graphically using HyperMesh (Altair, HyperWorks). To determine the head occipital condyle (OC) centroid, surface meshes of the OCs were made and the centroid of the surfaces was calculated. The Hybrid III contour was obtained using a MicroScribe Digitizer (Solution Technologies, Inc., Oella, MD). Comparisons of the average male and ATD contours were performed using 2 methods: (1) the midsagittal and midcoronal ATD contours relative to the OC centroid were compared to the corresponding 1 SD range of the average male contours; (2) the ATD sagittal contour was translated relative to the average male sagittal contour to minimize the area between the 2 contours. RESULTS: Average male head and skull contours were created. Landmark measurements were made for the dorsum sellae, nasion skin, nasion bone, infraorbital foramen, and external auditory meatus, all relative to the OC centroid. The Hybrid III midsagittal contour was outside the 1 SD range for 15.2 percent of the average male head contour but only by a maximum distance of 1.5 mm, whereas the Hybrid III midcoronal head contour was outside the 1 SD range for 12.2 percent of the average male head contour by a maximum distance of 2 mm. Minimization of the area between the midsagittal contours resulted in only 2.3 mm of translation, corroborating the good correlation between the contours established by initial comparison. CONCLUSIONS: Three-dimensional average male head and skull contours were created and measurements of landmark locations were made. It was found that the 50th percentile male Hybrid III corresponds well to the average male head contour and validated its 3D shape. Average adult head and skull contours and landmark data are available for public research use at http://biomechanics.pratt.duke.edu/data .

Importance of muscle activations for biofidelic pediatric neck response in computational models.

OBJECTIVE: During dynamic injury scenarios, such as motor vehicle crashes, neck biomechanics contribute to head excursion and acceleration, influencing head injuries. One important tool in understanding head and neck dynamics is computational modeling. However, realistic and stable muscle activations for major muscles are required to realize meaningful kinematic responses. The objective was to determine cervical muscle activation states for 6-year-old, 10-year-old, and adult 50th percentile male computational head and neck models. Currently, pediatric models including muscle activations are unable to maintain the head in an equilibrium position, forcing models to begin from nonphysiologic conditions. Recent work has realized a stationary initial geometry and cervical muscle activations by first optimizing responses against gravity. Accordingly, our goal was to apply these methods to Duke University's head-neck model validated using living muscle response and pediatric cadaveric data. METHODS: Activation schemes maintaining an upright, stable head for 22 muscle pairs were found using LS-OPT. Two optimization problems were investigated: a relaxed state, which minimized muscle fatigue, and a tensed activation state, which maximized total muscle force. The model's biofidelity was evaluated by the kinematic response to gravitational and frontal impact loading conditions. Model sensitivity and uncertainty analyses were performed to assess important parameters for pediatric muscle response. Sensitivity analysis was conducted using multiple activation time histories. These included constant activations and an optimal muscle activation time history, which varied the activation level of flexor and extensor groups, and activation initiation and termination times. RESULTS: Relaxed muscle activations decreased with increasing age, maintaining upright posture primarily through extensor activation. Tensed musculature maintained upright posture through coactivation of flexors and extensors, producing up to 32 times the force of the relaxed state. Without muscle activation, the models fell into flexion due to gravitational loading. Relaxed musculature produced 28.6-35.8 N of force to the head, whereas tensed musculature produced 450-1023 N. Pediatric model stiffnesses were most sensitive to muscle physiological cross-sectional area. CONCLUSIONS: Though muscular loads were not large enough to cause vertebral compressive failure, they would provide a prestressed state that could protect the vertebrae during tensile loading but might exacerbate risk during compressive loading. For example, in the 10-year-old, a load of 602 N was produced, though estimated compressive failure tolerance is only 2.8 kN. Including muscles and time-variant activation schemes is vital for producing biofidelic models because both vary by age. The pediatric activations developed represent physiologically appropriate sets of initial conditions and are based on validated adult cadaveric data.

Attenuation of blast pressure behind ballistic protective vests.

BACKGROUND: Clinical studies increasingly report brain injury and not pulmonary injury following blast exposures, despite the increased frequency of exposure to explosive devices. The goal of this study was to determine the effect of personal body armour use on the potential for primary blast injury and to determine the risk of brain and pulmonary injury following a blast and its impact on the clinical care of patients with a history of blast exposure. METHODS: A shock tube was used to generate blast overpressures on soft ballistic protective vests (NIJ Level-2) and hard protective vests (NIJ Level-4) while overpressure was recorded behind the vest. RESULTS: Both types of vest were found to significantly decrease pulmonary injury risk following a blast for a wide range of conditions. At the highest tested blast overpressure, the soft vest decreased the behind armour overpressure by a factor of 14.2, and the hard vest decreased behind armour overpressure by a factor of 56.8. Addition of body armour increased the 50th percentile pulmonary death tolerance of both vests to higher levels than the 50th percentile for brain injury. CONCLUSIONS: These results suggest that ballistic protective body armour vests, especially hard body armour plates, provide substantial chest protection in primary blasts and explain the increased frequency of head injuries, without the presence of pulmonary injuries, in protected subjects reporting a history of blast exposure. These results suggest increased clinical suspicion for mild to severe brain injury is warranted in persons wearing body armour exposed to a blast with or without pulmonary injury.

Mesh considerations for finite element blast modelling in biomechanics.

Finite element (FE) modelling is a popular tool for studying human body response to blast exposure. However, blast modelling is a complex problem owing to more numerous fluid-structure interactions (FSIs) and the high-frequency loading that accompanies blast exposures. This study investigates FE mesh design for blast modelling using a sphere in a closed-ended shock tube meshed with varying element sizes using both tetrahedral and hexahedral elements. FSI was consistent for sphere-to-fluid element ratios between 0.25 and 4, and acceleration response was similar for both element types (R(2) = 0.997). Tetrahedral elements were found to become increasingly volatile following shock loading, causing higher pressures and stresses than predicted with the hexahedral elements. Deviatoric stress response was dependent on the sphere mesh size (p < 0.001), while the pressure response was dependent on the shock tube mesh size (p < 0.001). The results of this study highlight the necessity for mesh sensitivity analysis in blast models.

Tensile failure properties of the perinatal, neonatal, and pediatric cadaveric cervical spine.

STUDY DESIGN: Biomechanical tensile testing of perinatal, neonatal, and pediatric cadaveric cervical spines to failure. OBJECTIVE: To assess the tensile failure properties of the cervical spine from birth to adulthood. SUMMARY OF BACKGROUND DATA: Pediatric cervical spine biomechanical studies have been few due to the limited availability of pediatric cadavers. Therefore, scaled data based on human adult and juvenile animal studies have been used to augment the limited pediatric cadaver data. Despite these efforts, substantial uncertainty remains in our understanding of pediatric cervical spine biomechanics. METHODS: A total of 24 cadaveric osteoligamentous head-neck complexes, 20 weeks gestation to 18 years, were sectioned into segments (occiput-C2 [O-C2], C4-C5, and C6-C7) and tested in tension to determine axial stiffness, displacement at failure, and load-to-failure. RESULTS: Tensile stiffness-to-failure (N/mm) increased by age (O-C2: 23-fold, neonate: 22 ± 7, 18 yr: 504; C4-C5: 7-fold, neonate: 71 ± 14, 18 yr: 509; C6-C7: 7-fold, neonate: 64 ± 17, 18 yr: 456). Load-to-failure (N) increased by age (O-C2: 13-fold, neonate: 228 ± 40, 18 yr: 2888; C4-C5: 9-fold, neonate: 207 ± 63, 18 yr: 1831; C6-C7: 10-fold, neonate: 174 ± 41, 18 yr: 1720). Normalized displacement at failure (mm/mm) decreased by age (O-C2: 6-fold, neonate: 0.34 ± 0.076, 18 yr: 0.059; C4-C5: 3-fold, neonate: 0.092 ± 0.015, 18 yr: 0.035; C6-C7: 2-fold, neonate: 0.088 ± 0.019, 18 yr: 0.037). CONCLUSION: Cervical spine tensile stiffness-to-failure and load-to-failure increased nonlinearly, whereas normalized displacement at failure decreased nonlinearly, from birth to adulthood. Pronounced ligamentous laxity observed at younger ages in the O-C2 segment quantitatively supports the prevalence of spinal cord injury without radiographic abnormality in the pediatric population. This study provides important and previously unavailable data for validating pediatric cervical spine models, for evaluating current scaling techniques and animal surrogate models, and for the development of more biofidelic pediatric crash test dummies.

The mechanical and morphological properties of 6 year-old cranial bone.

Traumatic Brain Injury (TBI) is a leading cause of mortality and morbidity for children in the United States. The unavailability of pediatric cadavers makes it difficult to study and characterize the mechanical behavior of the pediatric skull. Computer based finite element modeling could provide valuable insights, but the utility of these models depends upon the accuracy of cranial material property inputs. In this study, 47 samples from one six year-old human cranium were tested to failure via four point bending to study the effects of strain rate and the structure of skull bone on modulus of elasticity and failure properties for both cranial bone and suture. The results show that strain rate does not have a statistically meaningful effect on the mechanical properties of the six year-old skull over the range of strain rates studied (average low rate of 0.045 s(-1), average medium rate of 0.44 s(-1), and an average high rate of 2.2 s(-1)), but that these properties do depend on the growth patterns and morphology of the skull. The thickness of the bone was found to vary with structure. The bending stiffness (per unit width) for tri-layer bone (12.32±5.18 Nm(2)/m) was significantly higher than that of cortical bone and sutures (5.58±1.46 Nm(2)/m and 3.70±1.88 Nm(2)/m respectively). The modulus of elasticity was 9.87±1.24 GPa for cranial cortical bone and 1.10±0.53 GPa for sutures. The effective elastic modulus of tri-layer bone was 3.69±0.92 GPa. Accurate models of the pediatric skull should account for the differences amongst these three distinct tissues in the six year-old skull.

Development of a finite element model for blast brain injury and the effects of CSF cavitation.

Blast-related traumatic brain injury is the most prevalent injury for combat personnel seen in the current conflicts in Iraq and Afghanistan, yet as a research community,we still do not fully understand the detailed etiology and pathology of this injury. Finite element (FE) modeling is well suited for studying the mechanical response of the head and brain to blast loading. This paper details the development of a FE head and brain model for blast simulation by examining both the dilatational and deviatoric response of the brain as potential injury mechanisms. The levels of blast exposure simulated ranged from 50 to 1000 kPa peak incident overpressure and 1­8 ms in positive-phase duration, and were comparable to real-world blast events. The frontal portion of the brain had the highest pressures corresponding to the location of initial impact, and peak pressure attenuated by 40­60% as the wave propagated from the frontal to the occipital lobe. Predicted brain pressures were primarily dependent on the peak overpressure of the impinging blast wave, and the highest predicted brain pressures were 30%less than the reflected pressure at the surface of blast impact. Predicted shear strain was highest at the interface between the brain and the CSF. Strain magnitude was largely dependent on the impulse of the blast, and primarily caused by the radial coupling between the brain and deforming skull.The largest predicted strains were generally less than 10%,and occurred after the shock wave passed through the head.For blasts with high impulses, CSF cavitation had a large role in increasing strain levels in the cerebral cortex and periventricular tissues by decoupling the brain from the skull. Relating the results of this study with recent experimental blast testing suggest that a rate-dependent strain-based tissue injury mechanism is the source primary blast TBI.

Evaluation of pediatric skull fracture imaging techniques.

Radiologic imaging is crucial in the diagnosis of skull fracture, but there is some doubt as to whether different imaging modalities can accurately identify fractures present on a human skull. While studies have been performed to evaluate the efficacy of radiologic imaging at other anatomical locations, there have been no systematic studies comparing various CT techniques, including high resolution imaging with and without 3D reconstructions to conventional radiologic imaging in children, we investigated which imaging modalities: high-resolution CT scan with 3D projections, clinical-resolution CT scans or X-rays, best showed fracture occurrence in a pediatric human cadaver skull by having an expert pediatric radiologist examine radiologic images from fractured skulls. The skulls used were taken from pediatric cadavers ranging in age from 5 months to 16 years. We evaluated the sensitivity and specificity for the imaging modalities using dissection findings as the gold standard. We found that high-resolution CT scans with 3D projections and conventional CT provided the most accurate fracture diagnosis (single-fracture sensitivity of 71%) followed by X-rays (single-fracture sensitivity of 63%). Linear fractures outsider the region of the sutures were more identifiable than diastatic fractures, though the incidence of false positives was greater for linear fractures. In the two cases where multiple fractures were present on the same anatomical skull location, the radiologist was less likely to identify the presence of additional fractures than a single fracture. Overall, the high-resolution and clinical-resolution CT scans had the similar accuracy for detecting skull fractures while the use of the X-ray was both less accurate and had a lower specificity.