2D Transition Metal Carbides (MXenes) for Carbon Capture.

Global warming caused by burning of fossil fuels is indisputably one of mankind's greatest challenges in the 21st century. To reduce the ever-increasing CO2 emissions released into the atmosphere, dry solid adsorbents with large surface-to-volume ratio such as carbonaceous materials, zeolites, and metal-organic frameworks have emerged as promising material candidates for capturing CO2 . However, challenges remain because of limited CO2 /N2 selectivity and long-term stability. The effective adsorption of CO2 gas (≈12 mol kg-1 ) on individual sheets of 2D transition metal carbides (referred to as MXenes) is reported here. It is shown that exposure to N2 gas results in no adsorption, consistent with first-principles calculations. The adsorption efficiency combined with the CO2 /N2 selectivity, together with a chemical and thermal stability, identifies the archetype Ti3 C2 MXene as a new material for carbon capture (CC) applications.

Synthesis and properties of CS x F y thin films deposited by reactive magnetron sputtering in an Ar/SF6 discharge.

A theoretical and experimental study on the growth and properties of a ternary carbon-based material, CS x F y , synthesized from SF6 and C as primary precursors is reported. The synthetic growth concept was applied to model the possible species resulting from the fragmentation of SF6 molecules and the recombination of S-F fragments with atomic C. The possible species were further evaluated for their contribution to the film growth. Corresponding solid CS x F y thin films were deposited by reactive direct current magnetron sputtering from a C target in a mixed Ar/SF6 discharge with different SF6 partial pressures ([Formula: see text]). Properties of the films were determined by x-ray photoelectron spectroscopy, x-ray reflectivity, and nanoindentation. A reduced mass density in the CS x F y films is predicted due to incorporation of precursor species with a more pronounced steric effect, which also agrees with the low density values observed for the films. Increased [Formula: see text] leads to decreasing deposition rate and increasing density, as explained by enhanced fluorination and etching on the deposited surface by a larger concentration of F/F2 species during the growth, as supported by an increment of the F relative content in the films. Mechanical properties indicating superelasticity were obtained from the film with lowest F content, implying a fullerene-like structure in CS x F y compounds.

Transparent Conductive Two-Dimensional Titanium Carbide Epitaxial Thin Films.

Since the discovery of graphene, the quest for two-dimensional (2D) materials has intensified greatly. Recently, a new family of 2D transition metal carbides and carbonitrides (MXenes) was discovered that is both conducting and hydrophilic, an uncommon combination. To date MXenes have been produced as powders, flakes, and colloidal solutions. Herein, we report on the fabrication of ∼1 × 1 cm2 Ti3C2 films by selective etching of Al, from sputter-deposited epitaxial Ti3AlC2 films, in aqueous HF or NH4HF2. Films that were about 19 nm thick, etched with NH4HF2, transmit ∼90% of the light in the visible-to-infrared range and exhibit metallic conductivity down to ∼100 K. Below 100 K, the films' resistivity increases with decreasing temperature and they exhibit negative magnetoresistance-both observations consistent with a weak localization phenomenon characteristic of many 2D defective solids. This advance opens the door for the use of MXenes in electronic, photonic, and sensing applications.

Complementarity between high-energy photoelectron and L-edge spectroscopy for probing the electronic structure of 5d transition metal catalysts.

We demonstrate the successful use of hard X-ray photoelectron spectroscopy (HAXPES) for selectively probing the platinum partial d-density of states (DOS) in a Pt-Cu nanoparticle catalyst which shows activity superior to pure Pt towards the oxygen-reduction reaction (ORR). The information about occupied Pt d-band states was complemented by Pt L(2)-edge X-ray absorption near-edge spectroscopy (XANES), which probes unoccupied valence states. We found a significant electronic perturbation of the Pt projected d-DOS which was narrowed and shifted to higher binding energy compared to pure platinum. The effect of this electronic structure perturbation on the chemical properties of the nanoparticle surface is discussed in terms of the d-band model. We have thereby demonstrated that the combination of L-edge spectroscopy and HAXPES allows for an experimental derivation of the valence electronic structure in an element-specific way for 5d metal catalysts.

Peroxide-like intermediate observed at hydrogen rich condition on Pt(111) after interaction with oxygen.

Hydrogen peroxide has been found to form as a byproduct during fuel cell operation, which is linked to the degradation of the ion exchange membrane resulting in a shorter lifetime of the fuel cell. Using O 1s X-ray photoelectron spectroscopy and X-ray absorption spectroscopy we investigated the molecular oxygen adsorption on hydrogenated Pt(111) and found that adsorbed hydrogen promotes the formation of a hydrogen peroxide-like intermediate. Polarization dependent X-ray absorption spectroscopy reveals that the O-O molecular axis is close to parallel and the OH group is perpendicular to the surface.

The local structure of protonated water from x-ray absorption and density functional theory.

We present a combined x-ray absorption spectroscopy/computational study of water in hydrochloric acid (HCl) solutions of varying concentration to address the structure and bonding of excess protons and their effect on the hydrogen bonding network in liquid water. Intensity variations and energy shifts indicate changes in the hydrogen bonding structure in water as well as the local structure of the protonated complex as a function of the concentration of protons. In particular, in highly acidic solutions we find a dominance of the Eigen form, H(3)O(+), while the proton is less localized to a specific water under less acidic conditions.

Are recent water models obtained by fitting diffraction data consistent with infrared/Raman and x-ray absorption spectra?

X-ray absorption (XA) spectra have been computed based on water structures obtained from a recent fit to x-ray and neutron diffraction data using models ranging from symmetrical to asymmetrical local coordination of the water molecules [A. K. Soper, J. Phys.: Condens. Matter 17, S3273 (2005)]. It is found that both the obtained symmetric and asymmetric structural models of water give similar looking XA spectra, which do not match the experiment. The fitted models both contain unphysical structures that are allowed by the diffraction data, where, e.g., hydrogen-hydrogen interactions may occur. A modification to the asymmetric model, in which the non-hydrogen-bonded OH intramolecular distance is allowed to become shorter while the bonded OH distance becomes longer, improves the situation somewhat, but the overall agreement is still unsatisfactory. The electric field (E-field) distributions and infrared (IR) spectra are also calculated using two established theoretical approaches, which, however, show significant discrepancies in their predictions for the asymmetric structural models. Both approaches predict the Raman spectrum of the symmetric model fitted to the diffraction data to be significantly blueshifted compared to experiment. At the moment no water model exists that can equally well describe IR/Raman, x-ray absorption spectroscopy, and diffraction data.

X-ray absorption spectroscopy study of the hydrogen bond network in the bulk water of aqueous solutions.

We utilized X-ray absorption spectroscopy (XAS) and X-ray Raman scattering (XRS) in order to study the ion solvation effect on the bulk hydrogen bonding structure of water. The fine structures in the X-ray absorption spectra are sensitive to the local environment of the probed water molecule related to the hydrogen bond length and angles. By varying the concentration of ions, we can distinguish between contributions from water in the bulk and in the first solvation sphere. We show that the hydrogen bond network in bulk water, in terms of forming and breaking hydrogen bonds as detected by XAS/XRS, remains unchanged, and only the water molecules in the close vicinity to the ions are affected.