A DuMond-type crystal spectrometer for synchrotron-based X-ray emission studies in the energy range of 15-26 keV.

The design and performance of a high-resolution transmission-type X-ray spectrometer for use in the 15-26 keV energy range at synchrotron light sources is reported. Monte Carlo X-ray-tracing simulations were performed to optimize the performance of the transmission-type spectrometer, based on the DuMond geometry, for use at the Super X-ray absorption beamline of the Swiss Light Source at the Paul Scherrer Institute. This spectrometer provides an instrumental energy resolution of 3.5 eV for X-ray emission lines around 16 keV and 12.5 eV for emission lines at 26 keV, which is comparable to the natural linewidths of the K and L X-ray transitions in the covered energy range. First experimental data are presented and compared with results of the Monte Carlo X-ray simulations.

Distribution of aluminum over different T-sites in ferrierite zeolites studied with aluminum valence to core X-ray emission spectroscopy.

The potential of valence to core Al X-ray emission spectroscopy to determine aluminum distribution in ferrierite zeolites was investigated. The recorded emission spectra of four samples prepared with different structure directing agents exhibit slight variations in the position of the main emission peak and the intensity of its low energy shoulder. Theoretical calculations indicate that an increased intensity of the Kßx shoulder in the Al emission spectra can be linked to a predominant occupation of the T3 site by a single aluminum atom. This study thus suggests that valence to core X-ray emission spectroscopy can be applied to help determine the occupation of aluminum at crystallographic T-sites in zeolites.

X-ray emission spectroscopy: highly sensitive techniques for time-resolved probing of cerium reactivity under catalytic conditions.

Oxygen storage materials such as ceria are used in many catalytic applications because they can reversibly bind and release oxygen. Tools are needed to observe and quantify this activity which involves a change in the cerium oxidation state and to understand the involvement of cerium in catalytic processes. To prove that cerium changes its oxidation state in the catalytic cycle the transient rates of Ce3+ formation and decay should be compared to the overall reaction rate. For such mechanistic studies the time resolution is essential as the quantification of the Ce3+ species should be faster than the reaction rate. However, it is challenging to follow the dynamic changes of the cerium oxidation state under reaction conditions, especially when the concentration of cerium atoms involved in the reaction cycle is low. In this paper, we evaluate the sensitivity of high-resolution X-ray emission-based methods for the in situ time-resolved quantification of small concentrations of Ce3+ in ceria-based materials. We demonstrate that resonant X-ray emission spectroscopy (RXES) at optimal excitation energy is more sensitive than high energy resolution off-resonant spectroscopy (HEROS) and non-resonant X-ray emission spectroscopy (non-resonant XES) and that it can track the reactivity of less than 0.3% of cerium atoms in a 1% Pt/CeO2 catalyst in a plug-flow reactor with sub-second time resolution. These results demonstrate that X-ray emission-based methods can be used as very sensitive tools and provide new insights into dynamic changes of the oxidation state in reducible oxides in a variety of applications.

Homogeneity and elemental distribution in self-assembled bimetallic Pd-Pt aerogels prepared by a spontaneous one-step gelation process.

Multi-metallic aerogels have recently emerged as a novel and promising class of unsupported electrocatalyst materials due to their high catalytic activity and improved durability for various electrochemical reactions. Aerogels can be prepared by a spontaneous one-step gelation process, where the chemical co-reduction of metal precursors and the prompt formation of nanochain-containing hydrogels, as a preliminary stage for the preparation of aerogels, take place. However, detailed knowledge about the homogeneity and chemical distribution of these three-dimensional Pd-Pt aerogels at the nano-scale as well as at the macro-scale is still unclear. Therefore, we used a combination of spectroscopic and microscopic techniques to obtain a better insight into the structure and elemental distribution of the various Pd-rich Pd-Pt aerogels prepared by the spontaneous one-step gelation process. Synchrotron-based extended X-ray absorption fine structure (EXAFS) spectroscopy and high-angle annular dark-field (HAADF) scanning transmission electron microscopy (STEM) in combination with energy-dispersive X-ray spectroscopy (EDX) were employed in this work to uncover the structural architecture and chemical composition of the various Pd-rich Pd-Pt aerogels over a broad length range. The Pd80Pt20, Pd60Pt40 and Pd50Pt50 aerogels showed heterogeneity in the chemical distribution of the Pt and Pd atoms inside the macroscopic nanochain-network. The features of mono-metallic clusters were not detected by EXAFS or STEM-EDX, indicating alloyed nanoparticles. However, the local chemical composition of the Pd-Pt alloys strongly varied along the nanochains and thus within a single aerogel. To determine the electrochemically active surface area (ECSA) of the Pd-Pt aerogels for application in electrocatalysis, we used the electrochemical CO stripping method. Due to their high porosity and extended network structure, the resulting values of the ECSA for the Pd-Pt aerogels were higher than that for a commercially available unsupported Pt black catalyst. We show that the Pd-Pt aerogels possess a high utilization of catalytically active centers for electrocatalytic applications based on the nanostructured bimetallic framework. Knowledge about the homogeneity and chemical distribution of the bimetallic aerogels can help to further optimize their preparation by the spontaneous one-step gelation process and to tune their electrocatalytic reactivity.

Tracking the Temporal Dynamics of Intracellular Lead Speciation in a Green Alga.

Organisms have developed metal regulatory mechanisms in response to changes in the bioavailability of trace metals. Just as metal bioavailability dictates cellular uptake, intracellular metal speciation determines the availability of metals to exert biological effects. However, the missing link in understanding the relationship between metal uptake and biological responses is the ability to accurately measure intracellular metal speciation. We conducted Pb exposure studies on the well-characterized model green alga Chlamydomonas reinhardtii and identified temporal changes in intracellular Pb speciation under conditions relevant for fresh water ecosystems using resonant X-ray emission spectroscopy (RXES), which possesses enhanced sensitivity to functional group chemistry relative to X-ray absorption spectroscopy (XAS). Analysis of RXES maps show that only a small fraction of total intracellular Pb was complexed by thiol groups. Initial sequestration of Pb in oxides and inorganic phosphate was followed by binding of Pb to organic phosphate, suggesting potential interference in vital cellular functions. These results contrast proposed detoxification responses involving complexation by thiol groups from peptides.

High energy resolution off-resonant spectroscopy for x-ray absorption spectra free of self-absorption effects.

X-ray emission spectra recorded in the off-resonant regime carry information on the density of unoccupied states. It is known that by employing the Kramers-Heisenberg formalism, the high energy resolution off-resonant spectroscopy (HEROS) is equivalent to the x-ray absorption spectroscopy (XAS) technique and provides the same electronic state information. Moreover, in the present Letter we demonstrate that the shape of HEROS spectra is not modified by self-absorption effects. Therefore, in contrast to the fluorescence-based XAS techniques, the recorded shape of the spectra is independent of the sample concentration or thickness. The HEROS may thus be used as an experimental technique when precise information about specific absorption features and their strengths is crucial for chemical speciation or theoretical evaluation.

Communication: The electronic structure of matter probed with a single femtosecond hard x-ray pulse.

Physical, biological, and chemical transformations are initiated by changes in the electronic configuration of the species involved. These electronic changes occur on the timescales of attoseconds (10(-18) s) to femtoseconds (10(-15) s) and drive all subsequent electronic reorganization as the system moves to a new equilibrium or quasi-equilibrium state. The ability to detect the dynamics of these electronic changes is crucial for understanding the potential energy surfaces upon which chemical and biological reactions take place. Here, we report on the determination of the electronic structure of matter using a single self-seeded femtosecond x-ray pulse from the Linac Coherent Light Source hard x-ray free electron laser. By measuring the high energy resolution off-resonant spectrum (HEROS), we were able to obtain information about the electronic density of states with a single femtosecond x-ray pulse. We show that the unoccupied electronic states of the scattering atom may be determined on a shot-to-shot basis and that the measured spectral shape is independent of the large intensity fluctuations of the incoming x-ray beam. Moreover, we demonstrate the chemical sensitivity and single-shot capability and limitations of HEROS, which enables the technique to track the electronic structural dynamics in matter on femtosecond time scales, making it an ideal probe technique for time-resolved X-ray experiments.

A von Hamos x-ray spectrometer based on a segmented-type diffraction crystal for single-shot x-ray emission spectroscopy and time-resolved resonant inelastic x-ray scattering studies.

We report on the design and performance of a wavelength-dispersive type spectrometer based on the von Hamos geometry. The spectrometer is equipped with a segmented-type crystal for x-ray diffraction and provides an energy resolution in the order of 0.25 eV and 1 eV over an energy range of 8000 eV-9600 eV. The use of a segmented crystal results in a simple and straightforward crystal preparation that allows to preserve the spectrometer resolution and spectrometer efficiency. Application of the spectrometer for time-resolved resonant inelastic x-ray scattering and single-shot x-ray emission spectroscopy is demonstrated.

Design of a continuous-flow reactor for in situ x-ray absorption spectroscopy of solids in supercritical fluids.

This paper presents the design and performance of a novel high-temperature and high-pressure continuous-flow reactor, which allows for x-ray absorption spectroscopy or diffraction in supercritical water and other fluids under high pressure and temperature. The in situ cell consists of a tube of sintered, polycrystalline aluminum nitride, which is tolerant to corrosive chemical media, and was designed to be stable at temperatures up to 500 °C and pressures up to 30 MPa. The performance of the reactor is demonstrated by the measurement of extended x-ray absorption fine structure spectra of a carbon-supported ruthenium catalyst during the continuous hydrothermal gasification of ethanol in supercritical water at 400 °C and 24 MPa.