Impact of keratinized mucosa on implant-health related parameters: A 10-year prospective re-analysis study.

AIM: To investigate whether the lack of keratinized mucosa (KM) affects peri-implant health after 10 years of loading. MATERIALS AND METHODS: Data from 74 patients with 148 implants from two randomized controlled studies comparing different implant systems were included and analyzed. Clinical parameters including bleeding on probing (BOP), probing depth (PD), plaque index, marginal bone loss (MBL), and KM width (KMW) at buccal sites were collected at baseline (time of the final prosthesis insertion), 5-year and 10 years postloading. Multivariable logistic and linear regression models by means of a generalized estimated equation (GEE) were used to evaluate the influence of buccal KM on peri-implant clinical parameters; BOP, MBL, PD, and adjusted for implant type (one-piece or two-piece) and compliance. RESULTS: A total of 35 (24.8%) implants were healthy, 67 (47.5%) had mucositis and 39 (27.6%) were affected by peri-implantitis. In absence of buccal KM (KM = 0 mm), 75% of the implants exhibited mucositis, while in the presence of KM (KMW >0 mm) 41.2% exhibited mucositis. Regarding peri-implantitis, the corresponding percentages were 20% (KM = 0 mm) and 26.7% (KM >0 mm). Unadjusted logistic regression showed that the presence of buccal KM tended to reduce the odds of showing BOP at buccal sites (OR: 0.28 [95% CI, 0.07 to 1.09], p = 0.06). The adjusted logistic regression model revealed that having buccal KM (OR: 0.21 [95% CI, 0.05 to 0.85], p = 0.02) and using two-piece implants (OR: 0.34 [95% CI, 0.15 to 0.75], p = 0.008) significantly reduced the odds of showing BOP. Adjusted linear regression by means of GEE showed that KM and two-piece implants were associated with reduced MBL and MBL changes (p < 0.05). CONCLUSION: The lack of buccal KM appears to be linked with peri-implant parameters such as BOP and MBL, but the association is weak. The design of one-piece implants may account for their increased odds of exhibiting BOP.

Clinical Outcomes of Tooth- and Implant-Supported Restorations Performed in a University-based Undergraduate Program after 13-15 Years.

AIMS: To assess the clinical concept of patient treatment with fixed tooth- and implant-supported restorations in a university-based undergraduate program after 13 - 15 years. METHODS: Thirty patients (mean age 56 years) who had received multiple tooth- and implant-supported restorations were recalled after 13-15 years. The clinical assessment comprised of biological and technical parameters as well as patient satisfaction. Data were analyzed descriptively and the 13-15-year survival rates for tooth- and implant-supported single crowns and fixed dental prostheses were calculated. RESULTS: The survival rate of tooth-supported restorations amounted to 88.3% (single crowns) and 69.6% (fixed dental prostheses); in implants it reached 100% for all types of reconstructions. Overall, 92.4% of all reconstructions were free of technical complications. The most common technical complication was chipping of the veneering ceramic (tooth-supported restorations: 5.5%; implant-supported restorations: 13-15.9%) regardless of the material used. At teeth, increased probing depth ≥5mm was the most frequent biological complication (22.8%), followed by endodontic complications of root-canal treated teeth (14%) and loss of vitality at abutment teeth (8.2%). Peri-implantitis was diagnosed in 10.2% of implants. CONCLUSION: Results of this study indicate that the clinical concept implemented in the undergraduate program and performed by undergraduate students works well. The clinical outcomes are similar to those reported in the literature. In general, the majority of biological complications occurrs in reconstructed teeth, whereas implant-supported restorations are more prone to technical complications.

Alveolar ridge changes 1-year after early implant placement, with or without alveolar ridge preservation at single-implant sites in the aesthetic region: A secondary analysis of radiographic and profilometric outcomes from a randomized controlled trial.

OBJECTIVES: To assess both the radiographic and profilometric outcomes of early implant placement with or without alveolar ridge preservation (ARP) (using two different ARP techniques) after 1 year of loading. MATERIALS AND METHODS: Seventy-five patients with a failing single tooth in the anterior maxilla were randomly allocated to three groups (1:1:1): (a) ARP using demineralized bovine bone mineral containing 10% collagen (DBBM-C) covered by a collagen matrix (CM), (b) ARP using DBBM-C covered with a palatal graft (PG), and (c) unassisted socket healing (control). Eight weeks after tooth extraction, early implant placement was performed in all patients. Cone-beam computed tomography (CBCT) and impressions were taken 8 weeks after tooth extraction (ARP/unassisted healing) prior to implant placement and 1-year post-loading. Radiographic and profilometric outcomes were evaluated. RESULTS: Out of the 70 patients available for re-examination at 1-year post-loading, 55 datasets could be assessed (ARP-CM 19; ARP-PG 17; Control 19). The need for additional guided bone regeneration (GBR) at implant placement amounted to 31.6% (ARP-CM), 29.4% (ARP-PG), and 68.4% (unassisted healing). Adjusted models revealed that residual buccal bone height and additional GBR at implant placement significantly influenced the magnitude of the alveolar changes at 1 year (p < 0.05). In patients with ARP (group ARP-CM or ARP-PG) without additional GBR, the presence of bone convexity amounted to 36.0% (9/25) at 1-year post-loading. For patients that received ARP and additional GBR at implant placement, the frequency of bone convexity increased to 72.7% (8/11) (p = 0.042). Regarding profilometric measurements, a tendency toward agreement with radiographic outcomes was observed. CONCLUSIONS: Early implant placement with ARP can attenuate alveolar ridge changes at 1-year post loading by minimizing both radiographic and profilometric alterations. However, early implant placement with simultaneous GBR consistently yields superior radiographic and profilometric outcomes, regardless of whether ARP is performed.

Survival and complication rates of two dental implant systems supporting fixed restorations: 10-year data of a randomized controlled clinical study.

OBJECTIVES: To compare clinical, radiographic, biological and technical long-term outcomes of two types of dental implants over a period of 10 years. MATERIALS AND METHODS: Ninety-eight implants were placed in 64 patients, randomly allocated to one of two manufacturers (AST and STM). All implants were loaded with fixed restorations. Outcome measures were assessed at implant insertion (Ti), at baseline examination (TL), at 1, 3, 5, 8 and 10 (T10) years. Data analysis included survival, bone level changes, complications and clinical measures. RESULTS: Re-examination was performed in 43 patients (23 AST and 20 STM) at 10 years. The implant level analysis was based on 37 (AST) and 32 (STM) implants. Survival rates of 100% were obtained for both groups. The median changes of the marginal bone levels between baseline and T10 (the primary endpoint) amounted to a loss of 0.07 mm for group AST and a gain of 0.37 mm for group STM (intergroup p = 0.008). Technical complications occurred in 27.0% of the implants in group AST and in 15.6% in group STM. The prevalence of peri-implant mucositis was 29.7% (AST) and 50.1% (STM). The prevalence of peri-implantitis amounted to 0% (AST) and 6.3% (STM). CONCLUSIONS: Irrespective of the implant system used, the survival rates after 10 years were high. Minimal bone level changes were observed, statistically significant but clinically negligible in favor of STM. Technical complications were more frequently encountered in group AST, while group STM had a higher prevalence of peri-implant mucositis.

The L-shape technique in guided bone regeneration with simultaneous implant placement in the esthetic zone: A step-by-step protocol and a 2-14 year retrospective study.

OBJECTIVES: To describe the methodology of the "L-shape" technique in guided bone regeneration (GBR) with simultaneous implant placement and report on the clinical, esthetic, and patient satisfaction outcomes up to 14 years of follow-up. MATERIAL AND METHODS: Fourteen patients treated with the "L-shape" technique were included in this retrospective study. The L-shape technique was performed by trimming and placing a soft-type bone block made of deproteinized bovine bone mineral with 10% collagen at the buccal-occlusal aspect of the dental implant. The remaining gaps were filled with deproteinized bovine bone mineral granules and the augmented area was covered with a collagen membrane. The following parameters were recorded:  probing depth (PD), bleeding on probing (BOP), plaque index (PI), keratinized tissue width (KT) and marginal bone level (MBL). Esthetic outcomes were assessed according to the pink esthetic score (PES) and the white esthetic score (WES). Patient satisfaction was evaluated by means of a numerical rating scale (0-10). The stability of each augmented site was assessed by measuring the volumetric changes between baseline (crown delivery) and the respective follow-up. RESULTS: A total of 13 maxillary incisors and one maxillary canine in 14 patients were included. The mean follow-up period was 7.7 ± 3.8 years. PES values amounted to 10.7 ± 3.3 and WES to 8.8 ± 1.4. Patient satisfaction reached 9.4 ± 0.8. Mean PD at implant sites were 2.7 ± 0.7 mm while BOP amounted to 15.0 ± 0.2% and Pl to 5.0 ± 0.0%. Volumetric analyses revealed minimal changes at the augmented sites irrespective of the region of interest. Radiographic MBL remained relatively stable. CONCLUSIONS: Within the limitation of the present study the L-shape augmentation procedure seems to be a reliable technique when performing GBR with simultaneous implant placement in the esthetic zone. Outcomes encompassed stable clinical and esthetic results accompanied by high levels of patient satisfaction. Future randomized controlled trials are warranted to confirm possible benefits of the L-shape technique over traditional approaches. CLINICAL SIGNIFICANCE: The L-shape appears to be a simple yet promising technique in GBR with simultaneous implant placement that can easily be translated into clinical practice.

Risk Characteristics of Peri-Implant Infections: A Retrospective Evaluation in a University Consultation Setting.

Peri-implantitis is a common biological complication in dentistry. The aim of the present study was to retrospectively analyze risk characteristics in a group of patients referred to a university-based consultation for peri-implantitis. In all, 190 initial cases from 2010 to 2019 were evaluated and descriptively summarized. The evaluation included various parameters such as periodontitis, smoking and oral hygiene status, implant position, type of prosthetic restoration and retention, mucosal quality, and further anamnestic and clinical findings related to the potential risk of developing peri-implantitis. Peri-implantitis was diagnosed in 83% of the cases, with peri-implant mucositis alone in 16% of cases; furthermore, 38% of the patients were diagnosed with active/instable periodontitis, while 14% had stable periodontitis. Residual cement was considered as a potential co-factor of peri-implant inflammation in 43% of cases. Suboptimal implant positioning was found in 19% of patients. Peri-implantitis or peri-implant mucositis was present in about one-third of patients in the absence of smoking and periodontitis factors. Of note, 6% showed no identifiable risk factors. Factors related to an increased risk of peri-implantitis should be taken into consideration when planning implant treatment. Adequate prosthetic implant position, restoration, and cleanability remain important for long-term success.

[Influencing Hard and Soft Tissue Changes Following Tooth Extraction]. / Regeneration von verlorenem Knochen und verlorenem Zahnfleisch.

Influencing Hard and Soft Tissue Changes Following Tooth Extraction Abstract. Influencing Hard and Soft Tissue Changes Following Tooth Extraction The loss of a tooth leads to the initiation of resorption processes and thus to the remodeling of the tissues of the alveolar process. At the hard tissue level, this resorption mainly affects the bundle bone at the buccal side of the extracted tooth and occurs most rapidly in the first weeks and months after extraction. Tissue changes occur not only at the level of the hard tissue (bone), but also at the level of the soft tissue. These changes lead to a significant loss of volume, especially at the buccal area of the alveolar ridge. They are responsible for a volume loss of the alveolar ridge contour of up to 50 %.

Early implant placement with or without alveolar ridge preservation in single tooth gaps renders similar esthetic, clinical and patient-reported outcome measures: One-year results of a randomized clinical trial.

OBJECTIVES: To test whether early implant placement with alveolar ridge preservation (ARP) results in different esthetic, clinical and patient-reported outcome measures (PROMs) compared with early implant placement without ARP. MATERIAL AND METHODS: Seventy-five patients requiring single tooth extraction in the anterior maxilla were recruited. Following tooth extraction, the patients were randomly allocated to three groups: (a) ARP using demineralized bovine bone mineral containing 10% collagen (DBBM-C) covered by a collagen matrix (CM) (n = 25), (b) ARP using DBBM-C covered with a palatal graft (PG) (n = 25) and (c) spontaneous healing (control) (n = 25). Eight weeks after tooth extraction, a CBCT was taken and early implant placement was performed in all patients. Esthetic, clinical and PROMs were evaluated one year post-loading. RESULTS: A total of 70 patients were available for re-examination at one year post-loading. The median mid-facial mucosal margin change amounted to -0.02 mm (IQR -0.27-0.46) in the CM group, -0.13 mm (IQR -0.44-0.25) in the PG group and -0.14 mm (IQR -0.29-0.07) in the control group, with no significant differences between the groups. Mean PES scores amounted to 7.0 ± 1.4 in the CM group, 7.1 ± 1.5 in the PG group and 7.3 ± 1.7 in the control group without significant differences between the groups. Plaque, bleeding on probing and probing depth did not differ between treatment groups. PROMs in general revealed no significant differences between the groups. CONCLUSION: Early implant placement with ARP using either a collagen matrix or a palatal graft rendered similar esthetic, clinical and PROMs to early implant placement without ARP. When a failing tooth can be replaced with an implant within 2 months after tooth extraction, the added value of ARP might be clinically negligible.

Implants sites with concomitant bone regeneration using a resorbable or non-resorbable membrane result in stable marginal bone levels and similar profilometric outcomes over 5 years.

OBJECTIVES: To assess clinical and radiographic outcomes as well as the profilometric contour alterations of peri-implant hard and soft tissues around single implants treated with simultaneous guided bone regeneration (GBR) at 5 years. MATERIALS AND METHODS: Twenty-seven patients presenting with a single tooth gap in the esthetic zone received a two-piece implant. GBR was randomly performed using a resorbable (RES) or a non-resorbable membrane (N-RES) combined with a bone substitute material. Follow-up examinations were performed at baseline (BL = crown insertion), 1 year (FU-1), 3 years (FU-3), and at 5 years (FU-5) including clinical and radiographic parameters as well as profilometric changes. Statistics were performed by means of parametric and nonparametric tests. RESULTS: At 5 years, 20 out of 27 patients (9 RES, 11 N-RES) were re-examined. Median values for probing depth changed insignificantly between BL and FU-5 in both groups. The median marginal bone levels were located 0.23 mm (0.06; 0.46; RES) and 0.17 mm (0.13;0.28; N-RES) below the implant shoulder at FU-5 (changes over time p < .05). The calculated median profilometric change between BL and FU-5 was -0.28 mm (-0.53;-0.20; RES; p = .016) and -0.24 mm (-0.43;0.08; N-RES; p = .102; intergroup p = .380). The horizontal bone thickness decreased significantly between re-entry and FU-5 for group RES at all measured levels (p < .05) measuring 0.87 mm (0.0; 2.05) at the implant shoulder, whereas the decrease for group N-RES was insignificant (p = .031) with 0 mm (0; 0.84) at the implant shoulder at 5 years. CONCLUSIONS: Implants sites with concomitant GBR using a resorbable or non-resorbable membrane revealed stable marginal bone levels and clinical outcomes. Profilometric changes were clinically negligible over 5 years. The observed change in hard tissue thickness was partially compensated by an increase in soft tissue thickness.

Augmentation of soft tissue volume at pontic sites: a comparison between a cross-linked and a non-cross-linked collagen matrix.

AIM: To assess histopathological and histomorphometric outcomes of soft tissue volume augmentation procedures at pontic sites using a volume-stable cross-linked collagen matrix (VCMX) and a non-cross-linked collagen matrix (XCM). MATERIALS AND METHODS: In twelve adult beagle dogs, the mandibular premolars and first molar were hemisected and the mesial root extracted. Soft tissue augmentation was randomly performed using VCMX, XCM, or a sham-operated control. Sacrifice was performed after 4, 8, and 26 weeks. Non-decalcified sections were analyzed for histopathologic and histomorphometric measurements at four different levels below the crest (1.5, 2.5, 3.5, and 5.5 mm). RESULTS: Group VCMX presented a greater overall amount of soft tissue at all healing time points, more pronounced fibroblast ingrowth, vascularization, and a substantial new collagen deposition. Over time, group XCM demonstrated faster signs of degradation compared with group VCMX. Four weeks after augmentation, group VCMX yielded a higher mean ridge width compared with groups XCM (2.22 mm VCMX, 0.89 mm XCM (at 2.5 mm); 2.05 mm VCMX, 0.80 mm XCM (at 3.5 mm) p < 0.05) and sham (0.59 mm sham (at 1.5 mm); 0.48 mm (at 2.5 mm); 0.44 mm (at 3.5 mm) p < 0.05). After healing periods of 8 and 26 weeks, measurements in group VCMX remained significantly higher compared with group sham both at 8 weeks (levels of 1.5 mm, 2.5 mm and 5.5 mm) and at 26 weeks (levels of 1.5 mm, 3.5 mm and 5.5 mm) (p < 0.05). CONCLUSION: The use of a cross-linked collagen matrix resulted in a greater and more stable ridge width over time compared with control groups. CLINICAL RELEVANCE: Soft tissue volume augmentation at pontic sites is more effective when using a cross-linked compared with a non-cross-linked collagen matrix.

Soft tissue contour and radiographic evaluation of ridge preservation in early implant placement: A randomized controlled clinical trial.

OBJECTIVES: To compare two ridge preservation techniques and spontaneous healing in terms of hard and soft tissue changes 2 months after tooth extraction. MATERIAL AND METHODS: The study was designed as a randomized controlled trial and included 75 patients. After single tooth extraction in the maxillary incisor/premolar area, patients were randomly allocated to one of the following groups: (a) ridge preservation with a xenogeneic bone substitute covered with a collagen matrix (CM-group), (b) ridge preservation with a xenogeneic bone substitute covered with a free palatal graft (PG-group) or (c) spontaneous healing (control). Eight weeks after tooth extraction, implants were placed and clinical, profilometric and radiographic evaluations were performed. In addition, the need for further guided bone regeneration (GBR) at implant placement was assessed. The differences between the treatment groups were compared with the One-way ANOVA or Kruskal-Wallis test with the corresponding post hoc analysis. The proportions of the categorical parameters were compared with the Fisher´s exact test. RESULTS: Seventy-five patients underwent early implant placement 8 weeks after tooth extraction and were evaluated. CM-group (-0.9 SD 0.6 mm) and PG-group (-1.0 SD 0.8 mm) showed less horizontal bone resorption compared to the control group (-3.2 SD 2.1 mm) (p < .001). Moreover, the necessity of GBR at implant placement was significantly less in CM-group (32%) and PG-group (24%) when compared to control group (72%) (p = .001). Patients in CM-group experienced less pain than PG-group, one week after tooth extraction (p = .042). No significant differences were found regarding graft evaluation, post-operative complications, and soft tissue contour. CONCLUSIONS: Ridge preservation using a xenogeneic bone substitute covered with a collagen matrix or a palatal graft, results in less bone resorption and fewer GBR procedures at early implant placement compared to spontaneous healing.

Effect of crown-to-implant ratio on the marginal bone level changes and implant survival - A systematic review and meta-analysis.

The purpose of the systematic review and meta-analysis was to analyze the existing evidence regarding the effect of crown-to-implant ratio (CIR) on the peri-implant crestal bone level change and implant survival. Randomized controlled clinical trials, prospective as well as retrospective studies with a minimum follow-up period of 12 months and 10 patients per group were included for this systematic review. Statistical analysis was performed to determine CIR effects on the peri-implant marginal bone level changes and implant survival. A total of 28 articles (14 prospective studies and 14 retrospective studies) from a database of 201 articles, with 2097 patients and 4350 implants, were included. A mean CIR ranging from 0.6 to 2.44 was presented by the study groups. A weighted mean implant loss of 0.19% per year and peri-implant marginal bone level change of 0.63 mm ± 0.55 over 46.8 ± 5.2 months was calculated from the included studies. The peri-implant marginal bone level change (p = 0.155) and the rate of implant loss (p = 0.245) showed a statistically insignificant difference between implant restorations of a high (>1.5:1) and low (<1.5:1) CIR. Within its limitations, this review concludes that a high (>1.5:1) or a low (<1.5:1) CIR does not significantly affect the peri-implant marginal bone level change and implant survival rate. However, until further evidence becomes available, extrapolation to long term clinical success cannot be ascertained.

Local tissue effects of various barrier membranes in a rat subcutaneous model.

PURPOSE: The purpose of this study was to examine the local tissue reactions associated with 3 different poly(lactic-co-glycolic acid) (PLGA) prototype membranes and to compare them to the reactions associated with commercially available resorbable membranes in rats. METHODS: Seven different membranes-3 synthetic PLGA prototypes (T1, T2, and T3) and 4 commercially available membranes (a PLGA membrane, a poly[lactic acid] membrane, a native collagen membrane, and a cross-linked collagen membrane)-were randomly inserted into 6 unconnected subcutaneous pouches in the backs of 42 rats. The animals were sacrificed at 4, 13, and 26 weeks. Descriptive histologic and histomorphometric assessments were performed to evaluate membrane degradation, visibility, tissue integration, tissue ingrowth, neovascularization, encapsulation, and inflammation. Means and standard deviations were calculated. RESULTS: The histological analysis revealed complete integration and tissue ingrowth of PLGA prototype T1 at 26 weeks. In contrast, the T2 and T3 prototypes displayed slight to moderate integration and tissue ingrowth regardless of time point. The degradation patterns of the 3 synthetic prototypes were similar at 4 and 13 weeks, but differed at 26 weeks. T1 showed marked degradation at 26 weeks, whereas T2 and T3 displayed moderate degradation. Inflammatory cells were present in all 3 prototype membranes at all time points, and these membranes did not meaningfully differ from commercially available membranes with regard to the extent of inflammatory cell infiltration. CONCLUSIONS: The 3 PLGA prototypes, particularly T1, induced favorable tissue integration, exhibited a similar degradation rate to native collagen membranes, and elicited a similar inflammatory response to commercially available non-cross-linked resorbable membranes. The intensity of inflammation associated with degradable dental membranes appears to relate to their degradation kinetics, irrespective of their material composition.

Resin-Bonded Fixed Dental Prostheses with Zirconia Ceramic Single Retainers Show High Survival Rates and Minimal Tissue Changes After a Mean of 10 Years of Service.

PURPOSE: To assess the clinical outcomes of single-retainer resin-bonded fixed dental prostheses (RBFDPs) and the profilometric changes of pontic sites after a mean of 10 years in function. MATERIALS AND METHODS: Ten patients (mean age 32.4 years) who had received an RBFDP replacing a single anterior tooth were recalled after 10 years. Five patients had received a subepithelial connective tissue graft (SCTG) at the pontic site. The clinical assessment comprised the following parameters: probing depth, bleeding on probing, modified plaque control record, gingival recession, measurement of the width of keratinized mucosa, and intraoral photographs and radiographs. The modified criteria of the United States Public Health Services evaluation system were applied. Additionally, patient satisfaction was recorded. Data were analyzed descriptively, and the 10-year RBFDP survival rates were calculated using Kaplan-Meier analysis. RESULTS: The RBFDP survival rate after a mean follow-up of 10.0 years (range 7.4 to 13.3 years) was 100%. Neither technical failures nor biologic complications were observed. All abutment teeth remained vital, and no secondary caries were detected. Between baseline and follow-up examinations, the profilometric changes at the pontic sites were minimal, exhibiting a loss of -0.03 ± 0.10 mm (no SCTG) and 0.00 ± 0.37 mm (SCTG). CONCLUSION: The present study exhibited high survival rates and low complication rates of the restorations, as well as excellent profilometric stability of the pontic sites over 10 years. The use of an RBFDP is a viable long-term treatment option for replacing a single anterior tooth.

The positive effect of tenting screws for primary horizontal guided bone regeneration: A retrospective study based on cone-beam computed tomography data.

OBJECTIVES: To radiographically evaluate the effect of the adjunctive use of tenting screws (TS) for primary horizontal guided bone regeneration (GBR). MATERIALS & METHODS: Twenty-eight patients in need of staged bone augmentation were consecutively treated in a private practice. A xenogenic particulate bone substitute material (DBBM) and a resorbable collagen membrane were used in all patients. Subjects were divided into two groups: control (conventional GBR; n = 22) and test (tenting screws in conjunction with GBR - TS; n = 22). CBCT images were obtained before augmentation and after 6-8 months. CBCTs were superimposed, and linear horizontal measurements were performed. Alveolar ridge width (RW) and ridge width change (RWchange) were assessed at 1, 3, 5, and 7 mm below the bone crest. RESULTS: Forty-four sites in 28 patients were evaluated. No differences between the groups were detected for RW at baseline (TS: 5.87 ± 2.41; control: 5.36 ± 1.65). Regarding RWchange, TS promoted an additional effect at 1 and 3 mm below the crest compared to control (p < .05; RWchange-1 TS: 3.72 ± 2.46; control: 1.25 ± 3.05; RWchange-3 TS: 3.98 ± 2.53; control: 2.50 ± 2.02). The final RW was greater in group TS compared to the control group at the 1, 3, and 5 mm level (p < .05). CONCLUSIONS: The use of tenting screws exerted a positive effect on staged GBR with a greater final RW at the 3 mm level. In addition, GBR in conjunction with TS was able to provide consistent bone augmentation at lingual/palatal sites.

Changes of radiopacity around implants of different lengths: Five-year follow-up data of a randomized clinical trial.

OBJECTIVE: To follow-up the radiographic changes in peri-implant bone of short (6 mm, test group) and long (10 mm, control group) single-unit implants five years after loading. MATERIALS AND METHODS: Forty-three implants of the test and 44 implants of the control group could be reassessed from 96 originally included implants. Standardized areas of interest (AOI) were defined in the peri-implant bone at pre-defined locations at mid-length on both sides of the implants, and at the apex. An arbitrary mean grey scale value (GSV) was calculated for the AOI after brightness calibration of the radiographs. Changes for GSV were calculated and tested for possible inter- and intra-group differences using the Mann-Whitney and Wilcoxon tests. RESULTS: The calculated intra-group differences between baseline and 5 years in the test group accounted for 2.4 ± 19.6 (i.e. slight brightening) and -6.2 ± 20.2 for the control group (i.e. slight shading), which resulted in a statistically significant difference in GSV change (p < .05). Crown-to-implant ratio was the only parameter showing an effect on GSV change (p = .001). CONCLUSIONS: Assessing conventional radiographs, longer implants showed a slightly stronger change of radiopacity of the peri-implant bone (slight loss of density) than short ones (slightly enhanced density) after five years of loading.

A Randomized Controlled Clinical Trial Comparing Conventional And Computer-Assisted Implant Planning and Placement in Partially Edentulous Patients. Part 2: Patient Related Outcome Measures.

The objective of this study was to compare patient-related outcomes of conventional protocols with computer-assisted implant planning and template-guided implant placement (CAIPP) protocols. Partially edentulous patients (N = 73) were assigned to either surgical planning based on two-dimensional radiographs and freehand implant placement (control; n = 26) or using three-dimensional computer-tomography data and implant placement using a tooth-supported surgical guide (test groups T1 [n = 24] and T2 [n = 23]). The two test groups differed from each other in digital data acquisition, software functionality, and the guide-manufacturing process. All surgeries were performed as open-flap procedures. Patient-related outcome measures were evaluated using questionnaires. Statistical tests were performed to investigate differences between treatment groups. Before treatment, 53% of patients in the control group and 83% of patients in the test groups (T1: 88%, T2: 78%) were satisfied with their group allocation. In the control group, 37% of patients favored CAIPP technology, while only 11% in the test groups would have preferred a conventional procedure. After treatment, 50% of patients in the control and 86% in the test groups (T1: 76%, T2: 94%) were satisfied with their allocation. Twenty-one percent of control-group patients favored the CAIPP treatment, while 6% of the test-group patients would have preferred a conventional treatment. The quality-of-life parameters during and after surgery did not show significant differences between groups. More postoperative discomfort was reported after longer and more-complex surgeries including guided bone regeneration and surgeries with two surgical sites. Generally, patients preferred computer-based technologies. No differences in the intra- or postoperative discomfort were observed compared to control protocols. More-extensive surgical procedures negatively affected the intra-and postoperative quality of life, irrespective of the treatment group allocation.

Regeneration of alveolar ridge defects. Consensus report of group 4 of the 15th European Workshop on Periodontology on Bone Regeneration.

BACKGROUND AND AIMS: Bone augmentation procedures to enable dental implant placement are frequently performed. The remit of this working group was to evaluate the current evidence on the efficacy of regenerative measures for the reconstruction of alveolar ridge defects. MATERIAL AND METHODS: The discussions were based on four systematic reviews focusing on lateral bone augmentation with implant placement at a later stage, vertical bone augmentation, reconstructive treatment of peri-implantitis associated defects, and long-term results of lateral window sinus augmentation procedures. RESULTS: A substantial body of evidence supports lateral bone augmentation prior to implant placement as a predictable procedure in order to gain sufficient ridge width for implant placement. Also, vertical ridge augmentation procedures were in many studies shown to be effective in treating deficient alveolar ridges to allow for dental implant placement. However, for both procedures the rate of associated complications was high. The adjunctive benefit of reconstructive measures for the treatment of peri-implantitis-related bone defects has only been assessed in a few RCTs. Meta-analyses demonstrated a benefit with regard to radiographic bone gain but not for clinical outcomes. Lateral window sinus floor augmentation was shown to be a reliable procedure in the long term for the partially and fully edentulous maxilla. CONCLUSIONS: The evaluated bone augmentation procedures were proven to be effective for the reconstruction of alveolar ridge defects. However, some procedures are demanding and bear a higher risk for post-operative complications.

Influence of wound closure on volume stability with the application of different GBR materials: an in vitro cone-beam computed tomographic study.

PURPOSE: To assess the influence of using different combinations of guided bone regeneration (GBR) materials on volume changes after wound closure at peri-implant dehiscence defects. METHODS: In 5 pig mandibles, standardized bone defects were created and implants were centrally placed. The defects were augmented using different combinations of GBR materials: xenogeneic granulate and collagen membrane (group 1, n=10), xenogeneic granulate and alloplastic membrane (group 2, n=10), alloplastic granulates and alloplastic membrane (group 3, n=10). The horizontal thickness was assessed using cone-beam computed tomography before and after suturing. Measurements were performed at the implant shoulder (HT0) and at 1 mm (HT1) and 2 mm (HT2) below. The data were statistically analysed using the Wilcoxon signed-rank test to evaluate within-group differences. Bonferroni correction was applied when calculating statistical significance between the groups. RESULTS: The mean horizontal thickness before suturing was 2.55±0.53 mm (group 1), 1.94±0.56 mm (group 2), and 2.49±0.73 mm (group 3). Post-suturing, the values were 1.47±0.31 mm (group 1), 1.77±0.27 mm (group 2), and 2.00±0.48 mm (group 3). All groups demonstrated a loss of horizontal dimension. Intragroup changes exhibited significant differences in group 1 (P<0.001) and group 3 (P<0.01). Intergroup comparisons revealed statistically significant differences of the relative changes between groups 1 and 2 (P=0.033) and groups 1 and 3 (P=0.015). CONCLUSIONS: Volume change after wound closure was minimized by using an alloplastic membrane. The stability of the augmented horizontal thickness was most ensured by using this type of membrane irrespective of the bone substitute material used for membrane support.

Histologic analyses of flapless ridge preservation in sockets with buccal dehiscence defects using two alloplastic bone graft substitutes.

OBJECTIVES: To investigate whether one of two synthetic bone substitute materials used for ridge preservation in the extraction sockets with buccal dehiscence defects was superior regarding new bone formation and ridge preservation and to compare it to sites left for spontaneous healing. MATERIALS AND METHODS: In sixteen dogs, P3 and P4 were hemi-sectioned and the respective distal roots were extracted. Following the preparation of a mucoperiosteal flap without vertical releasing incisions, 50% of the buccal bone was carefully removed. The extraction sites were randomly assigned either to a ridge preservation procedure (alloplastic bone substitute material (two test groups)) or to spontaneous healing (control group). Descriptive histology and histomorphometric analyses were performed at healing times of 4, 8, and 16 weeks. In case of homogeneous variances, the results were analyzed by one-way ANOVA, followed by Tukey's post-hoc test. If inhomogeneous, the data was analyzed using Welch-type ANOVA, followed by the Games-Howell post-hoc test. RESULTS: The use of bone substitute material led to significantly greater horizontal dimensions amounting to 3.3 mm (SD = 0.67; test 1) and 3.5 mm (SD = 0.72; test 2) compared to spontaneous healing (1.7 mm, SD = 0.23) at 16 weeks of healing (p < 0.0001). A significant difference was observed between spontaneous healing and the test groups in terms of newly formed bone tissue at 4, 8, and 16 weeks (p = 0.001), with values reaching 7.9, 21.8, and 36.8% (test 1), 5.0, 10.4, and 29% (test 2), and 26.2, 43.5, and 56.4% (control), but there were no significant differences between the test groups (p > 0.05). The final ridge profile was more favorable after ridge preservation (p < 0.001) as demonstrated by a loss of 28.8% (spontaneous healing) and an increase in both test groups at 16 weeks (test 1 = 60.5% and test 2 = 31.2%). CONCLUSIONS: The use of alloplastic materials rendered greater horizontal dimensions and a more favorable maintenance of the ridge profile. CLINICAL RELEVANCE: Alloplastic bone substitute materials can successfully be used for ridge preservation procedures.