Assessment of industrial effluents for heavy metals concentration and evaluation of grass (Phalaris minor) as a pollution indicator.

This study was conducted to investigate the impact of industrial activities on heavy metals status in wastewater, sludge and flora on the bank of selected main drains of the Hayatabad Industrial estate, Peshawar. Plants, sludge and wastewater samples of selected sites were collected and analyzed for heavy metals distribution; cadmium (Cd), chromium (Cr), lead (Pb) and zinc (Zn) levels. Bioconcentration factor (BCF) values were calculated for plants (Phalaris minor) grass species found naturally at all sites. The results showed that the levels of metals in wastewater were lower than permissible limits except Cd and the concentration of metals in plants and sludge were within permissible limits when compared to their respective standards. Metal distribution was in the following order; sludge > plants > wastewater and the concentration of metals varied according to the distance from the source with no specific pattern. Sludge samples for all sites showed a high concentration of metals as compared to plants and wastewater samples. In grass samples, Zn was highest and Cd was low for all sites. Metals accumulation in plants was in order of; roots > shoot. Pearson's coefficient correlation showed that Cr in plant roots and Zn in shoots showed significantly high correlation with Cd in sludge while Pb in roots showed significant negative correlation with Zn in sludge. BCF values for Cr, Pb and Zn were >1, showing the phytoremediation potential of plants.

Impacts of pyrolysis temperatures on physicochemical and structural properties of green waste derived biochars for adsorption of potentially toxic elements.

This study comparatively investigated the influence of changes in pyrolysis temperature on the physicochemical, structural, and adsorptive properties of biochars derived from a green waste (Cynodon dactylon L.). For this purpose, the biophysically dried green wastes were pyrolyzed at 400 °C, 600 °C, and 800 °C under the same pyrolysis conditions. The results revealed that the physicochemical and structural properties were varied, depending upon the pyrolysis temperatures. With the increase of pyrolysis temperature, the surface functional groups were escaped, the structure became more porous (pore volume of 0.089 ± 0.001), the metal oxides were remained consistent, and the biochars turned into more alkaline nature (pH of 11.9 ± 0.2). Furthermore, as referring to the adsorptive performance for potentially toxic elements, with experimental adsorption capacity of up to 33.7 mg g-1 and removal rate up to 96% for a multi-metals containing solution, the biochars pyrolyzed at high temperature (800 °C) was significantly (p < 0.05) higher than those pyrolyzed at low temperature (400 °C). According to the physicochemical and structural properties, and the adsorptive performances of the biochars, the optimal pyrolysis temperature was herein recommended to be 800 °C.

Assessment of industrial wastewater for potentially toxic elements, human health (dermal) risks, and pollution sources: A case study of Gadoon Amazai industrial estate, Swabi, Pakistan.

In this study, industrial wastewater and groundwater were comparatively investigated for their physicochemical properties, concentrations of potentially toxic elements (PTEs), human health risks and pollution source(s). Every month, 34 wastewater samples and 26 groundwater samples were collected, for a duration of one year. The results showed that the physicochemical parameters and concentrations of PTEs in the industrial wastewater exceeded the maximum permissible limits of Pakistan Environmental Protection Agency (2000). Specifically, it was found that total dissolved solids (5%), total suspended solids (190%), chemical oxygen demand (107%), five-days biochemical oxygen demand (5.7 times), grease/oil (27.1 times), Fe (67%), Zn (29%), Mn (32%), Cu (27%), Ni (16%), Cr (8%), Pb (106%), and Cd (80%) were higher than the permissible limits. The carcinogenic and non-carcinogenic dermal health risks for wastewater irrigation group were significantly higher than the groundwater irrigation group. The hazard index of irrigation with industrial wastewater was 180 times higher than the groundwater. The principal component analysis indicated that industry was the main polluting source. The cluster analysis results of all PTEs (except Fe) were found in the same clade in the dendrogram, which showed a strong similarity within the monthly data set of the whole year. The study recommends using adjacent groundwater instead of industrial wastewater for irrigation purposes.

Effects of different biochars on physicochemical properties and immobilization of potentially toxic elements in soil - A geostatistical approach.

The impact of different biochars (BCs) on the physicochemical properties and immobilization of potentially toxic elements (PTEs) in contaminated soil irrigated with industrial wastewater for the last three decades was studied. Furthermore, the efficacy of applied BCs in reducing geostatistical risks was also evaluated. For this purpose, BCs were prepared from green waste (Cynodon dactylon L.) for the first time at different pyrolysis temperature (400 °C, 600 °C and 800 °C), and amended the contaminated soil in pots with two different ratios of 2% and 5% (w/w) under controlled conditions. The BCs amended soil samples were analyzed after five months (equivalent to the life span of a wheat crop). The physicochemical impacts of applied BCs on the soil showed that the acidic soil was changed to basic. A tremendous increase in water holding capacity, cation exchange capacity, dissolved organic carbon, carbon, phosphorus and potassium contents was observed. The PTEs concentrations and geostatistical risks were significantly (p ≤ 0.05) decreased by all the BCs. Among them, BC prepared at 800 °C and applied at a ratio of 5% was showed the best effects by reducing the bioavailable concentrations of Cd, Pb, Cr, Ni, Cu, Mn, Fe, As, Co and Zn in 88%, 87%, 78%, 76%, 69%, 65%, 64%, 63%, 46% and 21%, respectively. Similarly, significant (p ≤ 0.05) reductions in geoaccumulation index, enrichment factor, contamination factor, and ecological risk were recorded. Therefore, BC prepared at 800 °C and applied at a ratio of 5% is recommended for soil remediation.

Treatment of industrial wastewater with gamma irradiation for removal of organic load in terms of biological and chemical oxygen demand.

Water scarcity is a known and major issue throughout the world. To tackle water scarcity, there is an urgent need for water re-use and recycling through wastewater treatment. This study is an attempt to re-used industrial effluent after treatment with gamma irradiation. The main drain of the industrial estate was sampled and analyzed for Physico-chemical parameters. For treatment, irradiation dose 13 Kilo Gray (kGy) cobalt (Co60) was applied. The treated water was re-analyzed for comparison with pre-analysis and compliance with the National environmental quality standard (NEQS). A decrease was observed in TSS, BOD5, and COD with 79%, 81%, and 85% respectively. The results achieved are within the permissible limits of NEQS. It was concluded that gamma radiation is an instant method for industrial effluent and is herein recommended.

Assessment of Drinking Water Sources for Water Quality, Human Health Risks, and Pollution Sources: A Case Study of the District Bajaur, Pakistan.

The focus of the present study was to assess the quality of different drinking water sources, impacts of poor water quality on human health, and to apportion pollution source(s) of the district Bajaur, Pakistan. Drinking water samples (n = 331) were randomly collected from springs, hand pumps, open wells, and tube wells and analyzed for physicochemical parameters including toxic elements, and bacteriological contamination (i.e., Escherichia coli). Furthermore, a questionnaire survey was conducted to record the cases of waterborne diseases in the study area. The results showed that total suspended solids and bacteriological contamination exceeded the permissible limits of the WHO in all four of the water sources. Among the potentially toxic elements, Cd, Pb, and Mn were above the permissible limits of the WHO in some samples. The hazard index for spring water was found to exceed the toxicity level (i.e., HI > 1) set by US EPA for both adults and children, while the sources from hand pumps, open wells, and tube wells were within the safe limit. The order for the overall safety level for water quality in the study area was tube wells > open wells > hand pumps > springs. The pollution source apportionment statistics revealed that both geogenic and anthropogenic activities are the sources of drinking water contamination. The results of the questionnaire survey indicated that reports of waterborne diseases were highest in respondents who took their drinking water from springs, whereas reports of diseases were moderate in respondents taking their water from open wells and hand pumps and lowest in respondents taking their water from tube wells. Based on the findings of the study, the tube well source of water is recommended for drinking water purposes.

Effect of biochars on bioaccumulation and human health risks of potentially toxic elements in wheat (Triticum aestivum L.) cultivated on industrially contaminated soil.

In the present study, biochars (BCs) derived from naturally grown green waste (Cynodon dactylon L.) were investigated regarding their impacts on bioaccumulation of potentially toxic elements (PTEs), agronomic properties and human health risks of wheat crop cultivated on long-term industrially contaminated soil. Typically, three types of BCs were pyrolyzed at different highest temperature of treatment (HTT), i.e. 400 °C, 600 °C and 800 °C, in a horizontal reactor and applied to the contaminated soil with 2% and 5% (w/w) ratio. The characterization results of the BCs showed that significant positive changes in fundamental characteristics such as porosity, surface area, cation exchange capacity, dissolved organic carbon, phosphorus and potassium have occurred with increased HTT. The analytical results of wheat crop indicated that the BCs applications significantly (p ≤ 0.05) reduced concentration of PTEs in roots (48-95%), shoots (38-91%), leaves (30-91%) and grains (38-93%) of wheat plants. After the BCs application, the agronomic properties were enhanced up to 6-18%, 18-38%, 17-46%, 13-45%, 15-42%, 22-55% and 34-57% for germination rate, shoot length, shoot biomass, spike length, spike biomass, grain biomass and root biomass respectively. The human health risks of PTEs were significantly (p ≤ 0.05) decreased (31-93%) from toxicity level to safe level (except for Mn and Cu), after the BCs application. Based on the current study, the BCs (especially 800BC5) were recommended for reducing bioaccumulation of PTEs in different parts of the wheat plant, increasing growth and yield of wheat crop and decreasing human health risks via consumption of wheat grains.

Influence of aeration rate and reactor shape on the composting of poultry manure and sawdust.

To achieve successful composting, all the biological, chemical, and physical characteristics need to be considered. The investigation of our study was based on various physicochemical properties, i.e., temperature, ammonia concentration, carbon dioxide concentration, pH, electrical conductivity (EC), carbon/nitrogen (C/N) ratio, organic matter (OM) content, moisture content, bacterial population, and seed germination index (GI), during the composting of poultry manure and sawdust for different aeration rates and reactor shapes. Three cylindrical-shaped and three rectangular-shaped pilot-scale 60-L composting reactors were used in this study, with aeration rates of 0.3 (low), 0.6 (medium), and 0.9 (high) L min-1 kg-1 DM (dry matter). All parameters were monitored over 21 days of composting. Results showed that the low aeration rate (0.3 L min-1 kg-1 DM) corresponded to a higher and longer thermophilic phase than did the high aeration rate (0.9 L min-1 kg-1 DM). Ammonia and carbon dioxide volatilization were directly related to the temperature profile of the substrate, with significant differences between the low and high aeration rates during weeks 2 and 3 of composting but no significant difference observed during week 1. At the end of our study, the final values of pH, EC, moisture content, C/N ratio, and organic matter in all compost reactors were lower than those at the start. The growth rates of mesophilic and thermophilic bacteria were directly correlated with mesophilic and thermophilic conditions of the compost. The final GI of the cylindrical reactor with an airflow rate of 0.3 L min-1 kg-1 DM was 82.3%, whereas the GIs of the other compost reactors were below 80%. In this study, compost of a cylindrical reactor with a low aeration rate (0.3 L min-1 kg-1 DM) was more stable and mature than the other reactors. Implications: The poultry industry is growing in South Korea, but there are problems associated with the management of poultry manure, and composting is one solution that could be valuable for crops and forage if managed properly. For high-quality composting, the aeration rate in different reactor shapes must be considered. The objective of this study was to investigate various physicochemical properties with different aeration rates and rector shapes. Results showed that aeration rate of 0.3 L min-1 kg-1 DM in a cylindrical reactor provides better condition for maturation of compost.

Pollution and energy reduction strategy in soft drink industries.

The present study was conducted on soft drink industry with the objective to reduce wastewater pollution through end-of-pipe treatment and controlling energy loss through steam pipeline insulation approach. For this purpose, the main operation and manufacturing steps were examined. Wastewater was analyzed for 10 physicochemical parameters. Among these parameters, total dissolved solids (TDS), total suspended solids (TSS) and chemical oxygen demand (COD) were above their permissible level of Pakistan national environmental quality standards (Pak NEQS). For wastewater treatment, sedimentation, flocculation, coagulation and adsorption were tested. The active study reduces the pollution load up to 48%. After treatment, all the parameters were below the Pak NEQS level. To reduce the energy loss and economic benefits, the steam pipeline system was galvanized using glass wool, sheet and paper. Through galvanizing, 91.4% of energy was recovered and reduced an extra cost of 91.5%. The net saving of energy and cost are 312 GJ and114098 Rs/year, respectively. The study recommends end off pipe treatment and insulation of bare pipeline system for soft drink industries.

Effects of water shortage in Kabul River network on the plain areas of Khyber Pakhtunkhwa, Pakistan.

Kabul River is a shared resource of Pakistan and Afghanistan and is a major source of economy for both countries. It is used for irrigation, power generation, fishery, hunting, and recreation. This study explored human-induced impact on Kabul River and its associated wetlands. For an in-depth study, the area situated between the two tributaries of Kabul River, i.e., Shalam and Naguman Rivers, was selected. The focus of the study was to find out reduction in the wetland areas, its causes, and associated impacts. For this purpose, a survey was conducted in 10 villages selected randomly in 10 union councils. The study revealed that anthropogenic activities, such as wetland farming, grazing residential encroachment, and industrial development, have caused severe alteration in the wetland of the study areas. The results revealed that before the 1990s, 33.55% area of the study area was wetland. Due to regular decrease in the flow of the Kabul River System and human encroachment, it has engulfed 68.40% of the total wetland leaving behind only 10.60% wetland. This can be termed as a big ecological disturbance. In the long run, this will have negative effects on both the countries. It is therefore recommended to give proper attention to this important wetland, positioning between Shalam and Naguman Rivers and to conserve it. One of the solutions is to regulate the natural flow of Kabul River.