[Derivation of Conversion Formula of Image Quality Figure (IQFinv) Values by Old and New Analysis Software for Mammographic Contrast-detail Phantom].

PURPOSE: This study deals with the conversion of the image quality figure (IQFinv) values with CDMAM Analyser ver. 1 (old analysis software) used to analyse the images of CDMAM 3.4 phantom into the IQFinv values with a new analysis software, that is, CDMAM Analyser (ver. 2 and ver. 2.3), which is a software improved to be closer to human visual evaluation. METHODS: The IQFinv values were calculated using four mammography units and three analysis software. The IQFinv values using the old and new software were compared. RESULTS: The IQFinv values had no difference according to mammography units and beam quality. The conversion formula of IQFinv from CDMAM Analyser ver. 1 to CDMAM Analyser ver. 2 was derived. Furthermore, the conversion formula of IQFinv from CDMAM Analyser ver. 1 to CDMAM Analysis ver. 2.3 was also derived. CONCLUSION: Using each conversion formula, the IQFinv values using the old software can be converted to those using the new software. There was a slight difference between the IQFinv values using the new software.

[Comparison of Contrast to Noise Ratio and Signal Difference to Noise Ratio Based on QA and QC Guidelines in CR Mammography].

The measurement methods of contrast to noise ratio (CNR) and signal difference to noise ratio (SDNR) in digital mammography are different among several quality assurance (QA) guidelines, that is, the type of pixel value (PV), phantom shape, location of aluminum plate, and the size of region of interest (ROI) principally differ in data acquisition. We compared CNR (SDNR) obtained from three QA guidelines. They are the European Reference Organisation for Quality Assured Breast Screening and Diagnostic Services (EUREF), the International Electrotechnical Commission (IEC), and the International Atomic Energy Agency (IAEA). In EUREF and IEC, CNR was calculated using linearized pixel value (LPV). In IAEA, because the type of pixel value to use in SDNR was not specified, SDNR was calculated using PV and LPV, and CNR was calculated using LPV. Target/filter combinations are molybdenum/molybdenum (Mo/Mo) and molybdenum/rhodium (Mo/Rh). Applied various tube voltages are 25, 30, and 35 kV, and various phantom thicknesses are 20, 45, and 70 mm of polymethyl methacrylate (PMMA). The PV-SDNR of IAEA showed the largest value among the three methods, following LPV-CNR of IEC, LPV-CNR of EUREF at 20 mm PMMA thickness. In IAEA, SDNR changed by the kind of pixel value (PV or LPV). When CNR is calculated, every researcher should describe the type of guidelines, the kind of pixel value, and formula for calculation.

[Examination of axial zygomatic arch radiographs using the bisector method].

An axial radiograph of the zygomatic arch is taken in cases of patients with facial traumatic injury. Maintaining the patient's head in the retroflex position to take such axial radiographs is sometimes difficult because of medical conditions. In addition, since different positioning techniques for retroflexion are used by radiological technologists, the visibility of the zygomatic arch was poorly in reproduced. We contrived a novel technique for use in taking a zygomatic arch radiograph. We call it the "bisector method," and it does not require the retroflex position. We can take a zygomatic arch radiograph equal in quality to conventional axial radiographs (retroflex position) by exposing X-rays perpendicularly to the bisector of the angle between the casette and the zygomatic arch. This bisector method is relatively easy in that it does not require either the retroflex position or the expertise of a radiological technologist.