Determination of triazine herbicides in aqueous samples by dispersive liquid-liquid microextraction with gas chromatography-ion trap mass spectrometry.

A simple and rapid new dispersive liquid-liquid microextraction technique (DLLME) coupled with gas chromatography-ion trap mass spectrometric detection (GC-MS) was developed for the extraction and analysis of triazine herbicides from water samples. In this method, a mixture of 12.0 microL chlorobenzene (extraction solvent) and 1.00 mL acetone (disperser solvent) is rapidly injected by syringe into the 5.00 mL water sample containing 4% (w/v) sodium chloride. In this process, triazines in the water sample are extracted into the fine droplets of chlorobenzene. After centrifuging for 5 min at 6000 rpm, the fine droplets of chlorobenzene are sedimented in the bottom of the conical test tube (8.0+/-0.3 microL). The settled phase (2.0 microL) is collected and injected into the GC-MS for separation and determination of triazines. Some important parameters, viz, type of extraction solvent, identity and volume of disperser solvent, extraction time, and salt effect, which affect on DLLME were studied. Under optimum conditions the enrichment factors and extraction recoveries were high and ranged between 151-722 and 24.2-115.6%, respectively. The linear range was wide (0.2-200 microg L(-1)) and the limits of detection were between 0.021 and 0.12 microg L(-1) for most of the analytes. The relative standard deviations (RSDs) for 5.00 microg L(-1) of triazines in water were in the range of 1.36-8.67%. The performance of the method was checked by analysis of river and tap water samples, and the relative recoveries of triazines from river and tap water at a spiking level of 5.0 microg L(-1) were 85.2-114.5% and 87.8-119.4%, respectively. This method was also compared with solid-phase microextraction (SPME) and hollow fiber protected liquid-phase microextraction (HFP-LPME) methods. DLLME is a very simple and rapid method, requiring less than 3 min. It also has high enrichment factors and recoveries for the extraction of triazines from water.

Development and validation of a reversed-phase HPLC method for monitoring of synthetic reactions during the manufacture of a key intermediate of an anti-hypertensive drug.

A reversed-phase high-performance liquid-chromatographic method for monitoring of reactions involved in process development of a key intermediate of antihypertensive drugs, e.g, doxazosin mesylate, prazosin, alfuzosin, terazosin, etc., has been developed and validated. The HPLC profiles of impurities of 4-amino-2-chloro-6,7-dimethoxyquinazoline were used as fingerprints to follow the synthetic procedures in the manufacturing unit. The separation was accomplished on an Inertsil ODS-3 column with isocratic elution using acetonitrile-ammonium acetate (10 mM; pH 4.0; 50:50 v/v) as mobile phase and a photodiode array detector set at 240 nm at ambient temperature. The method was validated with respect to accuracy, precision, linearity, and limits of detection and quantification. The method could detect the impurities at a level of 0.01 to 0.20 microg/mL and it was found to be suitable not only for monitoring of reactions but also for quality assurance of 4-amino-2-chloro-6,7-dimethoxyquinazoline.