Volatile organic compound sensing in breath using conducting polymer coated chemi-resistive filter paper sensors.

In this work, a disposable sensor array was designed based on the chemi-resistive behavior of the conducting polymers to detect three volatile organic compounds (VOCs), i.e., acetone, ethanol, and methanol in air and breath. Four disposable resistive sensors were designed by coating polypyrrole and polyaniline (in their doped and de-doped forms) on filter paper substrates and tested against VOCs in air. Change in conductivity of the polymer resulting from exposure to various VOC concentration was measured as percentage resistance change using a standard multimeter. The lowest concentration detected for acetone, ethanol, and methanol vapors was 400 ppb, 150 ppb, and 300 ppb, respectively within 2 min. These VOC-responsive sensors, housed in an indigenous inert chamber, showed good stability, repeatability, and reversibility while sensing, thus making it suitable for environmental pollutant detection at room temperature. Furthermore, the non-specific nature of these easy to fabricate sensors towards all VOCs is considered favorable and upon classifying with principal component analysis (PCA), the gases were qualitatively distinguished in separate clusters. These developed sensors were also tested and analyzed using VOC spiked real breath samples as proof of concept.

Analytical tools for monitoring changes in physical and chemical properties of chromatography resin upon reuse.

Protein A resins are often reused for multiple cycles to improve process economy during mAb purification. Significant reduction in binding capacity and product recovery are typically observed due to the presence of unwanted materials (foulants) deposited on the resin upon reuse. In this paper, we have used a wide spectrum of qualitative and quantitative analytical tools (particle size analysis, HPLC, fluorescence, SEM, MS, and FTIR) to compare the strengths and shortcomings of different analytical tools in terms of their capability to detect the fouling of the resin and relate it to chromatographic cycle performance. While each tool offers an insight into this complex phenomena, fluorescence is the only one that can be used for real-time monitoring of resin fouling. A correlation could be established between fluorescence intensity and the process performance attributes (like yield or binding capacity) impacted upon resin reuse. This demonstration of the application of fluorescence for real-time monitoring correlated empirically with process performance attributes and the results support its use as a PAT tool as part of a process control strategy. While the focus of this paper is on fouling of protein A chromatography resin, the approach and strategy are pertinent to other modes of chromatography as well.