ABSTRACT
This study explored the impact of sodium hydroxide and benzoylation treatment on the production of cellulose nanocrystals from Semantan bamboo (Gigantochloa scortechinii). Bamboo cellulose nanocrystals (BCNs) were obtained via acid hydrolysis, with the effectiveness of an isolation method and chemical treatments demonstrated in removing non-cellulosic constituents. X-ray diffraction analysis revealed a crystalline cellulose II structure for benzoylated BCN (B) and a crystalline cellulose I structure for NaOH-treated BCN (S), with BCN (S) exhibiting a higher crystallinity index (80.55 %) compared to BCN (B) (67.87 %). The yield of BCN (B) (23.68 ± 1.10 %) was higher than BCN (S) (20.65 ± 2.21 %). Transmission electron microscopy images showed a mean diameter of 7.95 ± 2.79 nm for BCN (S) and 9.22 ± 3.38 nm for BCN (B). Thermogravimetric analysis indicated lower thermal stability for BCN (B) compared to BCN (S), with charcoal residues at 600 °C of 31.06 % and 22 %, respectively. Zeta potential values were -41.60 ± 1.97 mV for BCN (S) and -21.80 ± 2.54 mV for BCN (B). Gigantochloa scortechinii holds significant potential for sustainable and eco-friendly applications in the construction, furniture, and renewable energy industries. These findings highlight the versatility and potential of BCNs derived from Gigantochloa scortechinii for various applications.
Subject(s)
Cellulose , Nanoparticles , Cellulose/chemistry , Nanoparticles/chemistry , Poaceae/chemistry , Hydrolysis , X-Ray DiffractionABSTRACT
Application of synthetic fibres in composites has been raising environmental issues due to carbon emissions from the production site and reliability on non-renewable resources upon production. Hence, this research sets as a preliminary study to select suitable natural fibres to be hybridized with glass fibres for the development of sustainable and high-performance hybrid composites as potential alternative to conventional pultruded fibreglass composites in structural profile applications. In this study, analytical hierarchy process (AHP) was conducted to select the ideal natural fibre as reinforcement in the hybrid pultruded FRP composites suitable for structural applications. Hence, 13 natural fibre candidates were selected as alternatives and six criteria were chosen and analysed to select the best candidate for pultruded hybrid FRP. Criteria such as tensile strength, tensile modulus, density, cellulose content, elongation, and availability of fibres were assigned as the standard of selecting natural fibres for the application intended in this study. Among the 13 alternatives, kenaf was found to be the most suitable reinforcement for the application as it yielded the highest priority vector at 0.1. The results were then validated by carrying out sensitivity analysis to ensure kenaf is the most suitable material for the research.
ABSTRACT
The low-velocity impact behaviour of pineapple leaf fiber, PALF reinforce epoxy composite (P), PALF hybrid (GPG), and four-layer woven glass fiber (GGGG) composite was investigated. As for post-impact analysis, the damage evaluation was assessed through photographic images and X-ray computed tomography, using CT scan techniques. The key findings from this study are that a positive hybrid effect of PALF as a reinforcement was seen where the GPG shows the delayed time taken for damage initiation and propagation through the whole sample compared to GGGG. This clearly shows that the addition of fibers does have comparable composite properties with a fully synthetic composite. Through the visual inspection captured by photographic image, the presence of woven fiber glass mat in GPG presents a different damage mode compared to P. Moreover, CT scan results show extended internal damage at the cross-section of all impacted composite.
