Simultaneous Post and Cone Fractures of a Polyethylene Insert in a Mobile-Bearing Posterior-Stabilized Total Knee Arthroplasty.

We report a novel case of the simultaneous post and cone fractures of a polyethylene (PE) insert in a mobile-bearing posterior-stabilized total knee arthroplasty. Twelve years after the primary total knee arthroplasty, the 72-year-old male patient presented with a recurring right knee instability and was diagnosed with the wear of the PE insert based on physical and radiological examinations. Revision surgery was performed. The post and cone of the PE insert had fractured simultaneously. Moreover, the femoral and tibial components were in direct contact with each other. One year post-revision, knee function had improved. To diagnose a PE breakage, such as a post or cone fracture, surgeons should consider the possibility of PE breakage even in the absence of pain since patients might complain of subjective instability only.

Improvement of rotational arc during deep flexion range of a novel designed polyethylene insert for posterior-stabilised total knee arthroplasty.

BACKGROUND: One of the remaining issues in total knee arthroplasty (TKA) is achieving sufficient rotational arc during deep flexion range of the knee for specific postures such as the 'seiza' or cross-legged sitting. This study aimed to evaluate whether there was a change in the actual in vivo rotational arc during deep flexion range before and after a design change of polyethylene (PE) inserts. METHODS: In 50 posterior-stabilised TKA cases, knee kinematics, including rotational movement, were measured intraoperatively using an image-free navigation system to compare a newly designed PE insert with reduced the posterior lip with a conventional PE insert. Femoral-tibial rotational angles at 30°, 45°, 60°, 90°, 120°, and 130° knee flexion were evaluated. Varus/valgus instability, knee range of motion, and femoral rollback were also measured. Obtained parameters were compared between new and conventional PE inserts. The independent factors associated with rotational arc during deep flexion range (120° and 130° knee flexion) were analysed using multivariate analysis. RESULTS: The newly designed PE insert demonstrated a significant increase in the rotational arc at 120° (22.9 ± 8.7° vs. 30.1 ± 11.9°, P < 0.001) and 130° (24.3 ± 9.5° vs. 32.5 ± 12.4°, P < 0.001) knee flexion compared with that with the conventionally designed posterior-stabilised insert. Multivariate analysis demonstrated that using the newly designed PE insert was an independent predictor of improved rotational arc during deep flexion range: regression coefficient was 11.2 (95% confidence interval 7.1-15.3, P < 0.001). CONCLUSION: The design change, which reduced the posterior lip of the PE insert, contributed to improved rotational arc in 120° and 130° deep flexion ranges.

Long-term clinical results of alumina ceramic medial pivot total knee arthroplasty: a 10-year follow-up study.

BACKGROUND: The newly-designed alumina ceramic medial pivot total knee prosthesis was introduced to reduce polyethylene wear and better fit the anatomical morphology of the Asian population. This study aimed to clarify the long-term clinical results of alumina medial pivot total knee arthroplasty over a minimum follow-up period of 10 years. METHODS: The data of 135 consecutive patients who underwent primary alumina medial pivot total knee arthroplasty were analyzed in this retrospective cohort study. Patients were examined over a minimum 10-year follow-up period. The knee range of motion, Knee Society Score (KSS) knee score, Knee Society Score function score, and radiological parameters were assessed. The survival rate was also evaluated by using reoperation and revision as endpoints. RESULTS: The mean follow-up period lasted 11.8 ± 1.4 years. Patients who were not followed accounted for 7.4% of the total cohort. Knee and function scores of KSS improved significantly following total knee arthroplasty (P < 0.001). In 27 individuals (28.1%), a radiolucent line was observed. Aseptic loosening occurred in three cases (3.1%). The survival rates for reoperation and revision were 94.8% and 95.8% 10 years after the operation, respectively. CONCLUSIONS: During a minimum 10-year follow-up period, the present model of alumina medial pivot total knee arthroplasty showed good clinical outcomes and survival rates.

Clinical usefulness and safety in the early phase after a newly designed rotating-platform total knee arthroplasty: A prospective multicentre cohort study with a 2-year follow up.

BACKGROUND: This study aimed to assess the clinical results and safety of a newly designed rotating-platform posterior-stabilised total knee arthroplasty (TKA) in the early postoperative phase, within 2 years of follow up. METHODS: This prospective, multicentre cohort study included 100 consecutive patients who underwent rotating-platform posterior-stabilised (PS) TKA (Vanguard PSRP). After excluding dropouts, 93 patients were analysed. The objective Knee Society Score (KSS)-2011, subjective KSS-2011, knee range of motion, EuroQol 5 Dimension index, complications, and survival rates were assessed before TKA and at 6 months, 1 year, and 2 years postoperatively. The scores at each time-point were compared, and the survival rate was assessed with revision as the endpoint. To demonstrate non-inferiority, the clinical outcomes of patients who underwent rotating-platform PS TKA were compared with those collected retrospectively from 50 patients who underwent fixed-PS TKA (Vanguard PS), defined as the control group. RESULTS: All clinical outcomes at the final follow up significantly improved compared with their preoperative values (P < 0.001). The objective KSS-2011 was 90.0 ± 8.2 points, subjective KSS-2011 satisfaction was 30.7 ± 8.6 points, expectation was 10.4 ± 2.1 points, and functional activity was 74.0 ± 18.5 points at 2 years postoperatively. Complications included knee dislocation in one patient and surgical site infection in one patient. The survival rate was 99% at 2 years postoperatively. Clinical outcomes, complications, and survival rates of newly designed TKA were not statistically different compared with the control group. CONCLUSION: The newly designed rotating-platform PS TKA showed good clinical results and suitable safety during the early postoperative phase in this prospective multicentre cohort study.

Association of a Wider Medial Gap (Medial Laxity) in Flexion with Self-Reported Knee Instability After Medial-Pivot Total Knee Arthroplasty.

BACKGROUND: Medial-pivot total knee arthroplasty (TKA) is designed with high articular conformity in the medial compartment in order to achieve stability. The subjective outcome of patients has been reported to be good postoperatively; however, the association between the objective and subjective knee stability and the influence of subjective stability on the overall outcomes of TKA remained unknown. Our hypothesis was that postoperative flexion joint-gap imbalance could affect subjective knee instability following TKA in medial-pivot prostheses. The purpose of this study was to analyze the association between the joint gap in flexion and subjective knee instability and between subjective knee instability and outcomes following medial-pivot TKA. METHODS: A total of 769 patients who underwent primary TKA with use of medial-pivot prostheses were enrolled. Clinical outcomes included knee range of motion, Knee Society Score-2011 (KSS-2011), Forgotten Joint Score-12 (FJS-12), patient-reported subjective knee instability, and axial knee radiography to assess flexion joint-gap balance measured at the final follow-up. Clinical outcomes were compared between patients with and without subjective knee instability. Moreover, associated factors were analyzed for postoperative subjective knee instability. RESULTS: Overall, 177 patients (23%) reported experiencing postoperative subjective knee instability. Knee flexion (p = 0.04); KSS-2011 symptom (p<0.001), satisfaction (p<0.001), expectation (p=0.008), and activity (p<0.001) subscales; and FJS-12 (p < 0.001) were significantly worse in patients with subjective knee instability. The KSS-2011 subjective score differences were greater than the minimal clinically important difference. Older age at the time of surgery (odds ratio, 1.04; p = 0.04) and a wider postoperative joint gap in flexion on the medial side (odds ratio, 1.21; p = 0.001) were significant risk factors for subjective knee instability. A gap angle of -2.9° (i.e., medial laxity) was the threshold to predict postoperative knee instability (sensitivity, 0.29; specificity, 0.91). CONCLUSIONS: Postoperative flexion joint-gap laxity on the medial side following medial-pivot TKA affected the patient-reported subjective knee instability scores. Postoperative KSS-2011 subjective scores following medial-pivot TKA were poorer in patients with subjective knee instability. LEVEL OF EVIDENCE: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Joint Gap in Mid-Flexion Is Not a Predictor of Postoperative Flexion Angle After Total Knee Arthroplasty.

BACKGROUND: Postoperative knee flexion angle is one of the most important outcomes of total knee arthroplasty (TKA). Intraoperative ligament balancing may affect the postoperative range of motion of the knee. However, the relationship between intraoperative ligament balancing and postoperative flexion angle was still controversial. The purpose of this study was to determine whether intraoperative joint gap affects postoperative knee flexion angle or not. METHODS: Prospective multicenter study of 246 knees with varus osteoarthritis undergoing a posterior-stabilized, mobile-bearing TKA was performed. The joint gap before implantation and after implantation was measured. The joint gap after implantation was measured using a specially designed tensor device with the same shape of a total knee prosthesis at 0°, 30°, 60°, 90°, 120°, and 145° of flexion with the reduction of the patellofemoral joint. Stepwise multiple regression analysis was conducted to determine the predictors of the flexion angle of the knee after the operation. RESULTS: Predictors were identified in the following 3 categories: (1) preoperative flexion angle, (2) intraoperative flexion angle, and (3) joint gap looseness at 120° of flexion (joint gap after implantation at 120° of flexion - joint gap after implantation at 0° of flexion) (R = 0.472, P < .01). CONCLUSION: Flexion angle after TKA was not affected by the flexion joint gap looseness before implantation and the joint gap looseness after implantation from 30° to 90° of flexion. Surgeons should notice that joint gap looseness in mid-flexion range did not increase the postoperative knee flexion angle.

Clinical results of alumina medial pivot total knee arthroplasty at a minimum follow-up of 10years.

BACKGROUND: The medial pivot total knee prosthesis with alumina ceramic femoral components was introduced to reproduce physiological knee kinematics and reduce polyethylene wear. The five-year clinical outcomes of alumina medial pivot total knee arthroplasties (TKA) have previously been reported. The purpose of this study was to provide the longer-term clinical results at a minimum follow-up of 10years. METHODS: The clinical results of 70 alumina medial pivot TKA in 51 consecutive patients, with a minimum follow-up period of 10years, were evaluated. RESULTS: Mean follow-up was 11.8years (range 10 to 13). Alumina medial pivot TKAs improved the patients' Knee Society knee scores, function scores, and postoperative ranges of motion compared with their pre-operative statuses (P<0.05 for each). Revision surgery was required in one knee due to a postoperative fracture of the tibial plateau after a fall that occurred two years postoperatively. Osteolysis and femoral component loosening was identified in one case after the initial five-year time point of analysis. The survival rate was 99.1% at 10years. CONCLUSIONS: This study demonstrated excellent clinical results for patients receiving the alumina medial pivot prosthesis at a minimum follow-up period of 10years.

The effect of tourniquets on patellofemoral joint congruity during total knee arthroplasty.

BACKGROUND: Incongruity of the patellofemoral joint after total knee arthroplasty (TKA) causes anterior knee pain. Intraoperative congruity tests are necessary to avoid unnecessary lateral retinacular release, and the usage of tourniquets may influence these results. The purpose of this study was to examine the effect of tourniquets on patellofemoral joint congruity during TKA. MATERIALS AND METHODS: Two hundreds and seventeen knees were examined after TKA. Skyline radiographs at 60° and 90° flexion were taken immediately after wound closure before and after tourniquet deflation to compare changes in patellar tilt angle. RESULTS: In the patellar tilt angle at 60° flexion, lateral tilt was observed in 18 knees. Tourniquet deflation changed the patellar tilt angle by a mean -0.7° ± 1.2° (p = 0.030). Medial tilt was observed in 10 knees. Tourniquet deflation changed the patellar tilt angle by 0.9° ± 0.7° (p = 0.004). Tourniquet deflation improved the degree of lateral and medial patellar tilt. In the patellar tilt angle at 90° flexion, lateral tilt was observed in 118 knees. Tourniquet deflation changed the patellar tilt angle by a mean -1.1° ± 1.2° (p < 0.001). Medial tilt was observed in 71 knees. Tourniquet deflation changed the patellar tilt angle by 0.5° ± 1.0° (p < 0.001). Tourniquet deflation improved the degree of lateral and medial patellar tilt. CONCLUSIONS: Tourniquet deflation improved patellofemoral congruity in a statistically significant way, but only to a small extent, indicating low clinical significance. Therefore, intraoperative congruity tests performed with tourniquets in place are reliable.

Decreased extension gap and valgus alignment after implantation of total knee prosthesis in primary varus knees.

PURPOSE: It was hypothesised that implantation of a total knee prosthesis may change the size and shape of the joint gap. To test this hypothesis, a tensor device was used which was specifically designed to reproduce the conditions before and after implantation, including attachment of the polyethylene insert trial. This study aimed to compare the joint gaps before and after implantation of a total knee prosthesis using this new tensor device. METHODS: A total of 259 primary varus knees were included in this study. Knees were exposed using a medial parapatellar approach, and the anterior and posterior cruciate ligaments were resected. After the trial reduction, the intraoperative joint gap kinematics was measured using the tensor device. RESULTS: Implantation of a total knee prosthesis decreased the size of the extension joint gap and made it valgus, but did not influence the size or shape of the flexion joint gap. CONCLUSIONS: The present findings suggest that the classical gap technique, which creates equal and rectangular extension and flexion joint gaps in the bone cutting surface, results in an imbalance between the extension and flexion joint gaps after implantation. To achieve equal and rectangular extension and flexion joint gaps after implantation, the prepared extension joint gap should be about 2 mm larger than the flexion joint gap and slightly varus before implantation in primary varus knees. LEVEL OF EVIDENCE: Therapeutic study, Level II.

Midflexion Laxity After Implantation Was Influenced by the Joint Gap Balance Before Implantation in TKA.

The relationship between the joint gap before and after implantation in 259 knees during the total knee arthroplasty was investigated using a tensor device which can attach the polyethylene insert trial. Patients were divided into following 3 groups according to the joint gap balance before implantation (flexion joint gap--extension joint gap); group 1: >1mm; group 2: -1 to 1mm, and group 3: <-1mm. Joint gap after implantation was loose at 30°, 60°, 90°, and 120° of flexion in group 1 and 2, but loose only at 30° of flexion in group 3 (p<0.01). This study showed that loose flexion joint gap before implantation increased the risk of joint gap laxity after implantation especially at midflexion ranges.

Dry-film polymer waveguide for silicon photonics chip packaging.

Polymer waveguide made by dry film process is demonstrated for silicon photonics chip packaging. With 8 µm × 11.5 µm core waveguide, little penalty is observed up to 25 Gbps before or after the light propagate through a 10-km long single-mode fiber (SMF). Coupling loss to SMF is 0.24 dB and 1.31 dB at the polymer waveguide input and output ends, respectively. Alignment tolerance for 0.5 dB loss increase is +/- 1.0 µm along both vertical and horizontal directions for the coupling from the polymer waveguide to SMF. The dry-film polymer waveguide demonstrates promising performance for silicon photonics chip packaging used in next generation optical multi-chip module.

Intraoperative assessment of midflexion laxity in total knee prosthesis.

BACKGROUND: Soft-tissue balancing of the knee is fundamental to the success of a total knee arthroplasty (TKA). In posterior-stabilized TKA, there is no stabilizer of the anterior-posterior translation in the midflexion range in which the cam-post mechanism does not engage yet. Therefore, instability in the midflexion range is suspected to occur in posterior-stabilized TKA. The purpose of this study was to measure the joint gap throughout a full range of motion and to analyze the joint gap laxity in the midflexion range after implantation of a mobile-bearing posterior-stabilized total knee prosthesis. METHODS: Joint gap kinematics in 259 knees with varus osteoarthritis were measured during TKAs using a tensor device with the same shape of a total knee prosthesis of the same design was used. After the implantation of a mobile-bearing posterior-stabilized prosthesis and the reduction of the patellofemoral joint, the joint gap was measured at 0°, 30°, 60°, 90°, 120°, and 145° of flexion. RESULTS: The center size of the joint gap was tight in extension and deep flexion and loose at midflexion ranges, especially at 30° of flexion (p<0.001). The symmetry of the joint gap was varus at 0° and 145° of flexion (p<0.001). CONCLUSIONS: Our results showed the joint gap laxity in the midflexion range after the implantation of a mobile-bearing posterior-stabilized prosthesis. Our new tensor device, which can attach the polyethylene insert trial, will provide the important information about the joint gap kinematics after implantation of total knee prostheses. LEVEL OF EVIDENCE: IV.

Feedback tolerance of DFB laser for silicon photonics packaging.

Silicon photonics packaging without optical isolator is of significant importance to realize low fabrication cost and small device size. In this report, impact of external feedback on DFB laser performance is investigated both theoretically and experimentally. Dynamic transfer matrix method and rate equation model are coupled to describe the dynamic interaction between optical field and carriers in a DFB structure under the feedback by external reflection. The calculation model exhibits laser spectrum splits and output intensity fluctuates with increase of the degree of external feedback, in good agreement with experimental results. The theoretical analysis is performed under various feedback parameters, and the optimum packaging condition for DFB laser chip in silicon photonics is guided.

Joint gap measurement in total knee arthroplasty using a tensor device with the same articulating surface as the prosthesis.

BACKGROUND: We developed a new tensor to measure the joint gap throughout knee flexion during total knee arthroplasty (TKA). This tensor has the same articular shape as that of the tibial liner, including the post structure and the curvature of femorotibial articular surface, to measure the gap intraoperatively under the same conditions as after TKA. The present study aimed to examine the precision of the new tensor for gap measurement after implantation. METHODS: We performed TKA using the modified gap technique in four cadaveric knees and measured the gaps using the new tensor. The intra-observer and inter-observer error of the tensor was analyzed using 168 measurements of the gaps as determined at least twice by two surgeons. In addition, the gaps in rotating-platform posterior-stabilized TKA were measured at seven positions with the knee bending from extension to full flexion. RESULTS: The inter-observer and intra-observer errors were 0.8 and 0.3 mm, respectively, indicating precise and reproducible gap measurement. The gaps before implantation in reduced patellar position were 12.1 mm at extension and 12.5 mm at 90° flexion. The gaps after implantation were 9.1, 12.9, 13.1, 13.5, 13.8, 13.3, and 10.1 mm at 0°, 30°, 45°, 60°, 90°, 120°, and full flexion, respectively. CONCLUSIONS: The new tensor provides precise and reproducible measurements. Although the joint gap before implantation was parallel and equal at extension and 90° flexion, the joint gap after implantation was variable throughout knee flexion. This feature of the gap should be considered during the operation.

Movement of the posterior cruciate ligament during knee flexion--MRI analysis.

The movement of the posterior cruciate ligament (PCL) during flexion of the living knee is unknown. The purpose of the present study was to analyze the movement of the PCL using magnetic resonance imaging (MRI). The posterior cruciate ligaments in 20 normal knees were visualized using MRI from extension to deep flexion. Sagittal inclination relative to the longitudinal axis of the tibia was measured and analyzed with reference to the patellar tendon (PT) and the anterior cruciate ligament (ACL). Although the PCL was slack in extension, it straightened with anterior inclination (24.1+/-5.1 degrees ) at 90 degrees flexion. At active maximum flexion (129.2+/-8.1 degrees ), the ligament was almost parallel (3.9+/-7.4 degrees inclination) to the longitudinal axis of the tibia. At passive maximum flexion (158.8+/-5.8 degrees ), the inclination was reversed anteroposteriorly, measuring -23.0+/-6.7 degrees . The PCL and PT moved in a corresponding manner within 20 degrees of discrepancy. The results of this in vivo study of the PCL have clinical relevance to conservative therapy for PCL knee injuries. The results of this study could also be useful in PCL reconstruction surgery to determine the optimum graft position to allow maximum postoperative motion.