Metamaterial Enhancement of Metal-Halide Perovskite Luminescence.

Metal-halide perovskites are rapidly emerging as solution-processable optical materials for light-emitting applications. Here, we adopt a plasmonic metamaterial approach to enhance photoluminescence emission and extraction of methylammonium lead iodide (MAPbI3) thin films based on the Purcell effect. We show that hybridization of the active metal-halide film with resonant nanoscale sized slits carved into a gold film can yield more than 1 order of magnitude enhancement of luminescence intensity and nearly 3-fold reduction of luminescence lifetime corresponding to a Purcell enhancement factor of more than 300. These results show the effectiveness of resonant nanostructures in controlling metal-halide perovskite light emission properties over a tunable spectral range, a viable approach toward highly efficient perovskite light-emitting devices and single-photon emitters.

Ultrafast Coherent Absorption in Diamond Metamaterials.

Diamond is introduced as a material platform for visible/near-infrared photonic metamaterials, with a nanostructured polycrystalline diamond metasurface only 170 nm thick providing an experimental demonstration of coherent light-by-light modulation at few-optical-cycle (6 fs) pulse durations. "Coherent control" of absorption in planar (subwavelength-thickness) materials has emerged recently as a mechanism for high-contrast all-optical gating, with a speed of response that is limited only by the spectral width of the absorption line. It is shown here that a free-standing diamond membrane structured by focused ion beam milling can provide strong, spectrally near-flat absorption over a visible to near-infrared wavelength range that is wide enough (wider than is characteristically achievable in plasmonic metal metasurfaces) to facilitate coherent modulation of ultrashort optical pulses comprising only a few oscillations of electromagnetic field.

Fibre-optic metadevice for all-optical signal modulation based on coherent absorption.

Recently, coherent control of the optical response of thin films in standing waves has attracted considerable attention, ranging from applications in excitation-selective spectroscopy and nonlinear optics to all-optical image processing. Here, we show that integration of metamaterial and optical fibre technologies allows the use of coherently controlled absorption in a fully fiberized and packaged switching metadevice. With this metadevice, which controls light with light in a nanoscale plasmonic metamaterial film on an optical fibre tip, we provide proof-of-principle demonstrations of logical functions XOR, NOT and AND that are performed within a coherent fibre network at wavelengths between 1530 and 1565 nm. The metadevice has been tested at up to 40 gigabits per second and sub-milliwatt power levels. Since coherent absorption can operate at the single-photon level and with 100 THz bandwidth, we argue that the demonstrated all-optical switch concept has potential applications in coherent and quantum information networks.

11-fs dark pulses generated via coherent absorption in plasmonic metamaterial.

We demonstrate generation of the shortest reported 11fs dark pulses using the coherent absorption process on a plasmonic absorber with a gating pulse. The dark pulses appear as a power dip on the envelope of a long carrier pulse and are characterized using the cross-correlation technique. The principal difference and advantage of our approach in comparison with previously developed laser sources of dark pulses is that, in principle, it allows transferring arbitrary pattern of bright pulses into a pattern of dark pulses in another optical signal channel.

Multi-Photon Absorption in Metal-Organic Frameworks.

Multi-photon absorption (MPA) is among the most prominent nonlinear optical (NLO) effects and has applications, for example in telecommunications, defense, photonics, and bio-medicines. Established MPA materials include dyes, quantum dots, organometallics and conjugated polymers, most often dispersed in solution. We demonstrate how metal-organic frameworks (MOFs), a novel NLO solid-state materials class, can be designed for exceptionally strong MPA behavior. MOFs consisting of zirconium- and hafnium-oxo-clusters and featuring a chromophore linker based on the tetraphenylethene (TPE) molecule exhibit record high two-photon absorption (2PA) cross-section values, up to 3600 GM. The unique modular building-block principle of MOFs allows enhancing and optimizing their MPA properties in a theory-guided approach by combining tailored charge polarization, conformational strain, three-dimensional arrangement, and alignment of the chromophore linkers in the crystal.

Solution-Grown CsPbBr3 /Cs4 PbBr6 Perovskite Nanocomposites: Toward Temperature-Insensitive Optical Gain.

With regards to developing miniaturized coherent light sources, the temperature-insensitivity in gain spectrum and threshold is highly desirable. Quantum dots (QDs) are predicted to possess a temperature-insensitive threshold by virtue of the separated electronic states; however, it is never observed in colloidal QDs due to the poor thermal stability. Besides, for the classical II-VI QDs, the gain profile generally redshifts with increasing temperature, plaguing the device chromaticity. Herein, this paper addresses the above two issues simultaneously by embedding ligands-free CsPbBr3 nanocrystals in a wider band gap Cs4 PbBr6 matrix by solution-phase synthesis. The unique electronic structures of CsPbBr3 nanocrystals enable temperature-insensitive gain spectrum while the lack of ligands and protection from Cs4 PbBr6 matrix ensure the thermal stability and high temperature operation. Specifically, a color drift-free stimulated emission irrespective of temperature change (20-150 °C) upon two-photon pumping is presented and the characteristic temperature is determined to be as high as ≈260 K. The superior gain properties of the CsPbBr3 /Cs4 PbBr6 perovskite nanocomposites are directly validated by a vertical cavity surface emitting laser operating at temperature as high as 100 °C. The results shed light on manipulating optical gain from the advantageous CsPbBr3 nanocrystals and represent a significant step toward the temperature-insensitive frequency-upconverted lasers.

A New Class of Lasing Materials: Intrinsic Stimulated Emission from Nonlinear Optically Active Metal-Organic Frameworks.

Blue-color stimulated emission with low threshold power is observed from In- and Zn-MOFs, which feature a highly fluorescent chromophore densely packed and rigidly linked to the metal-ion centers in the solid state. The density-of-states and transition dipole moments are calculated and the stimulated emission phenomenon is correlated with these properties.

Origin of Photocarrier Losses in Iron Pyrite (FeS2) Nanocubes.

Iron pyrite has received significant attention due to its high optical absorption. However, the loss of open circuit voltage (Voc) prevents its further application in photovoltaics. Herein, we have studied the photophysics of pyrite by ultrafast laser spectroscopy to understand fundamental limitation of low Voc by quantifying photocarrier losses in high quality, stoichiometric, and phase pure {100} faceted pyrite nanocubes. We found that fast carrier localization of photoexcited carriers to indirect band edge and shallow trap states is responsible for major carrier loss. Slow relaxation component reflects high density of defects within the band gap which is consistent with the observed Mott-variable range hopping (VRH) conduction from transport measurements. Magnetic measurements strikingly show the magnetic ordering associated with phase inhomogeneity, such as FeS2-δ (0 ≤ δ ≤ 1). This implies that improvement of iron pyrite solar cell performance lies in mitigating the intrinsic defects (such as sulfur vacancies) by blocking the fast carrier localization process. Photocarrier generation and relaxation model is presented by comprehensive analysis. Our results provide insight into possible defects that induce midgap states and facilitate rapid carrier relaxation before collection.

Second harmonic generation from the 'centrosymmetric' crystals.

Second harmonic generation (SHG) is a well known non-linear optical phenomena which can be observed only in non-centrosymmetric crystals due to non-zero hyperpolarizability. In the current work we observed SHG from a Zn(II) complex which was originally thought to have crystallized in the centrosymmetric space group C2/c. This has been attributed to the unequal antiparallel packing of the metal complexes in the non-symmetric space group Cc or residual non-centrosymmetry in C2/c giving rise to polarizability leading to strong SHG. The enhancement of SHG by UV light has been attributed to the increase in non-centrosymmetry and hence polarity of packing due to strain induced in the crystals. The SHG signals measured from these crystals were as large as potassium dihydrogen phosphate crystals, KH2PO4 (KDP), and showed temperature dependence. The highest SHG efficiency was observed at 50 K. The SHG phenomenon was observed at broad wavelengths ranging from visible to below-red in these crystals.

Blue liquid lasers from solution of CdZnS/ZnS ternary alloy quantum dots with quasi-continuous pumping.

A blue (ca. 440 nm) liquid laser with an ultra-low threshold through which quasi-continuous wave pumping is accessible is achieved by engineering unconventional ternary CdZnS/ZnS alloyed-core/shell QDs. Such an achievement is enabled by exploiting the novel gain media with minimal defects, suppressed Auger recombination, and large gain cross-section in combination with high-quality-factor whispering gallery mode resonators.

Linear and Nonlinear Optical Properties of Photoresponsive [60]Fullerene Hybrid Triads and Tetrads with Dual NIR Two-Photon Absorption Characteristics.

Two C60-(antenna)x analogous compounds having branched hybrid triad C60(>DPAF-C18)(>CPAF-C2M) and tetrad C60(>DPAF-C18)(>CPAF-C2M)2 nanostructures were synthesized and characterized. The structural design was intended to facilitate the ultrafast fs intramolecular energy-transfer from photoexcited C60[>1(DPAF)*-C18](>CPAF-C2M)1or2 or C60(>DPAF-C18)[>1(CPAF)*-C2M]1or2 to the C60> cage moiety upon two-photon pumping at either 780 or 980 nm, respectively. The latter nanostructure showed approximately equal extinction coefficients of optical absorption over 400-550 nm that corresponds to near-IR two-photon based excitation wavelengths at 780-1100 nm for broadband nonlinear optical (NLO) applications. Aside from their enhanced two-photon absorption (2PA) activity at 780 nm, we also demonstrated ultrafast photo-responses at 980 nm showing 2PA cross-section (σ2) values of 995-1100 GM for the hybrid tetrad. These σ2 values were correlated to the observed good efficiency in reducing fs light-transmittance down to 35% at the light intensity of 110 GW/cm2. Accordingly, 2PA characteristics of these nanostructures at multiple NIR wavelengths provided support for their suitability in uses as broadband NLO nanomaterials at 600-1100 nm that includes the 2PA ability of two antenna, DPAF (700-850 nm) and CPAF (850-1100 nm), and the fullerene cage at shorter wavelengths (600-700 nm).

High-performance broadband photodetector using solution-processible PbSe-TiO(2)-graphene hybrids.

Highly sensitive, multicomponent broadband photodetector devices are made from PbSe/graphene/TiO(2). TiO(2) and PbSe nanoparticles act as light harvesting photoactive materials from the UV to IR regions of the electromagnetic spectrum, while the graphene acts as a charge collector for both photogenerated holes and electrons under an applied electric field.

Large Femtosecond Two-Photon Absorption Cross-Sections of Fullerosome Vesicle Nanostructures Derived from Highly Photoresponsive Amphiphilic C(60)-Light-Harvesting Fluorene Dyad.

We demonstrated ultrafast femtosecond nonlinear optical (NLO) absorption characteristics of bilayered fullerosome vesicle nanostructures derived from molecular self-assembly of amphiphilic oligo(ethylene glycolated) C(60)-(light-harvesting diphenylaminofluorene antenna). Fullerene conjugates were designed to enhance photoresponse in a femtosecond time scale by applying an isomerizable periconjugation linker between the C(60) cage and diphenylaminofluorene antenna subunit in an intramolecular contact distance of only < 3.0 Å. Morphology of C(60)(>DPAF-EG(12)C(1))-based fullerosome nanovesicles in H(2)O was characterized to consist of a bilayered shell with a sphere diameter of 20-70 nm and a chromophore shell-width of 9.0-10 nm, fitting well with a head-to-head packing configuration of the molecular length. At the estimated effective nanovesicle concentration as low as 5.5 × 10(-8) MV (molecular molar concentration of 5.0 × 10(-4) M) in H(2)O, two-photon absorption (2PA) phenomena were found to be the dominating photophysical events showing a large molar concentration-insensitive 2PA cross-section value equivalent to 8500 GM in a form of nanovesicles, on average. The observed NLO characteristics led to a sharp trend of efficient light-transmittance intensity reduction at the input laser intensity above 100 GW/cm(2).

Laser patterning of epitaxial graphene for Schottky junction photodetectors.

Large-area patterning of epitaxial graphene for Schottky junction photodetectors has been demonstrated with a simple laser irradiation method. In this method, semimetal-semiconductor Schottky junctions are created in a controllable pattern between epitaxial graphene (EG) and laser-modified epitaxial graphene (LEG). The zero-biased EG-LEG-EG photodetector exhibits a nanosecond and wavelength-independent photoresponse in a broad-band spectrum from ultraviolet (200 nm) through visible to infrared light (1064 nm), distinctively different from conventional photon detectors. An efficient external photoresponsivity (or efficiency) of ∼0.1 A·W(-1) is achieved with a biased interdigitated EG-LEG-EG photodetector. The fabrication method presented here opens a viable route to carbon optoelectronics for a fast and highly efficient photoconductive detector.

Transient photoconductivity and femtosecond nonlinear optical properties of a conjugated polymer-graphene oxide composite.

A water soluble conjugated thiophene polymer, sodium salt of poly[2-(3-thienyl)ethoxy-4-butylsulfonate] (TPP), and graphene oxide (GO) composite film (GO-TPP) device was prepared. Transient photoconductivity measurements were carried out on the GO-TPP composite film using 150 ns laser pulses of 527 nm wavelength. Highly efficient photocurrent generation was observed from the GO-TPP film. The relationships of the film photoconductivity, photocurrent decay time and electron decay times with the incident light intensity were investigated. The photoconductive gain of the film was determined to be greater than 40% and to be independent of the light intensity. Furthermore, the femtosecond nonlinear optical properties of the GO-TPP film were measured using 800 nm femtosecond laser pulses and the composite film exhibited high nonlinear absorption and nonlinear refraction coefficients.