Monitoring of the Binding Between EGFR Protein and EGFR Aptamer Using In-Situ Total Internal Reflection Ellipsometry.

The epidermal growth factor receptor (EGFR) protein has received significant attention in medical biotechnology because it is an important component in cell growth and division. We report the results of a study on the binding between the EGFR protein and the associated aptamer, measured in real time. Aptamers can be used for clinical purposes including macromolecular medicine and basic research. In particular, EGFR aptamers are promising molecular agents for targeting cancer. The data were obtained in-situ with total internal reflection ellipsometry (TIRE), which combines the analytic capability of spectroscopic ellipsometry with the high surface sensitivity of surface plasmon resonance measurements. Our results show that TIRE can be used to determine adsorption of nanoscale biomolecules. Our results are supported by additional data obtained by liquid atomic-force-microscopy.

Manual, In situ, Real-Time Nanofabrication using Cracking through Indentation.

Nanofabrication has seen an increasing demand for applications in many fields of science and technology, but its production still requires relatively difficult, time-consuming, and expensive processes. Here we report a simple but very effective one dimensional (1D) nano-patterning technology that suggests a new nanofabrication method. This new technique involves the control of naturally propagating cracks initiated through simple, manually generated indentation, obviating the necessity of complicated equipment and elaborate experimental environments such as those that employ clean rooms, high vacuums, and the fastidious maintenance of processing temperatures. The channel fabricated with this technique can be as narrow as 10 nm with unlimited length and very high cross-sectional aspect ratio, an accomplishment difficult even for a state-of-the-art technology such as e-beam lithography. More interestingly, the fabrication speed can be controlled and achieved to as little as several hundred micrometers per second. Along with the simplicity and real-time fabrication capability of the technique, this tunable fabrication speed makes the method introduced here the authentic nanofabrication for in situ experiments.

Patterning by controlled cracking.

Crack formation drives material failure and is often regarded as a process to be avoided. However, closer examination of cracking phenomena has revealed exquisitely intricate patterns such as spirals, oscillating and branched fracture paths and fractal geometries. Here we demonstrate the controlled initiation, propagation and termination of a variety of channelled crack patterns in a film/substrate system comprising a silicon nitride thin film deposited on a silicon substrate using low-pressure chemical vapour deposition. Micro-notches etched into the silicon substrate concentrated stress for crack initiation, which occurred spontaneously during deposition of the silicon nitride layer. We reproducibly created three distinct crack morphologies--straight, oscillatory and orderly bifurcated (stitchlike)--through careful selection of processing conditions and parameters. We induced direction changes by changing the system parameters, and we terminated propagation at pre-formed multi-step crack stops. We believe that our patterning technique presents new opportunities in nanofabrication and offers a starting point for atomic-scale pattern formation, which would be difficult even with current state-of-the-art nanofabrication methodologies.

Highly stretchable and highly conductive metal electrode by very long metal nanowire percolation network.

A highly stretchable metal electrode is developed via the solution-processing of very long (>100 µm) metallic nanowires and subsequent percolation network formation via low-temperature nanowelding. The stretchable metal electrode from very long metal nanowires demonstrated high electrical conductivity (~9 ohm sq(-1) ) and mechanical compliance (strain > 460%) at the same time. This method is expected to overcome the performance limitation of the current stretchable electronics such as graphene, carbon nanotubes, and buckled nanoribbons.

Hierarchical weeping willow nano-tree growth and effect of branching on dye-sensitized solar cell efficiency.

In this paper we have demonstrated the simple, low cost, low temperature, hydrothermal growth of weeping willow ZnO nano-trees with very long branches to realize high efficiency dye-sensitized solar cells (DSSCs). We also discuss the effects of branching on solar cell efficiency. By introducing branched growth on the backbone ZnO nanowires (NWs), the short circuit current density and the overall light conversion efficiency of the branched ZnO NW DSSCs increased to almost four times that for vertically grown ZnO NWs. The efficiency increase is attributed to the increase in surface area for higher dye loading and light harvesting and also to reduced charge recombination through direct conduction along the crystalline ZnO branches. As the length of the branches increased, the branches became flaccid and the increase in solar cell efficiency slowed down because the effective surface area increase was hindered by branch bundling during the drying process and subsequent decrease in the dye loading.

Digital selective growth of ZnO nanowire arrays from inkjet-printed nanoparticle seeds on a flexible substrate.

In this article, we introduce fully digital selective ZnO nanowire array growth on inkjet-printed seed patterning. Through proper natural convection suppression during hydrothermal growth, successful ZnO nanowire local growth can be achieved. Without any need for photolithographic processing or stamp preparation, the nanowire growth location can be easily modified when the inkjet printing process is integrated with a CAD (computer-aided design) system to allow a high degree of freedom when the design needs to be changed. The current proposed process is very fast, low-cost, environmentally benign, and low-temperature. Therefore, it can be applied to a flexible plastic substrate and scaled up for larger substrates for mass production or roll-to-roll processing.

Nanoforest of hydrothermally grown hierarchical ZnO nanowires for a high efficiency dye-sensitized solar cell.

In this paper, in order to increase the power conversion efficiency we demonstrated the selective growth of "nanoforest" composed of high density, long branched "treelike" multigeneration hierarchical ZnO nanowire photoanodes. The overall light-conversion efficiency of the branched ZnO nanowire DSSCs was almost 5 times higher than the efficiency of DSSCs constructed by upstanding ZnO nanowires. The efficiency increase is due to greatly enhanced surface area for higher dye loading and light harvesting, and also due to reduced charge recombination by providing direct conduction pathways along the crystalline ZnO "nanotree" multi generation branches. We performed a parametric study to determine optimum hierarchical ZnO nanowire photoanodes through the combination of both length-wise growth and branched growth processes. The novel selective hierarchical growth approach represents a low cost, all solution processed hydrothermal method that yields complex hierarchical ZnO nanowire photoanodes by utilizing a simple engineering of seed particles and capping polymer.