ABSTRACT
The membrane filtration process is the most widely used purification process in various industries due to its high separation efficiency, process simplicity, and low cost. Although there is a wide range of membrane products with diverse materials and pore sizes on the market, there is a technological gap between microfiltration and ultrafiltration membranes. Here we developed highly porous polyvinylidene fluoride (PVDF) membranes with a selective skin layer with a pore size range of 20 to 80 nm by using a thermal-vapor assisted phase separation method. Porous and bi-continuous sublayers were generated from spinodal decomposition induced by cooling. The overall membrane structure and pore size changed with the dope composition, while the pore size and thickness of the selective skin layer were effectively controlled by water vapor exposure. The excellent nanoparticle removal efficiencies of the prepared PVDF membranes were confirmed, indicating their potential application in high-level purification processes to remove small trace organic or inorganic impurities from various industrial fluids.
ABSTRACT
This study demonstrates a simple and novel preparation method to prepare ceramic nanofiltration membranes with a precise and tunable molecular weight cut-off (MWCO) by packing variously sized nanoparticles into existing membrane pores. As a result, ceramic membranes with a MWCO from 1000 Da to 10,000 Da were successfully prepared with the narrow distribution of the pore size after the filtration-coating process. In addition, the effective porosity of the ceramic membranes was calculated from the results of the membrane properties by the Hagen-Poiseuille equation which fit within the range of the sphere packing theory from 17.3% to 41.8%. Furthermore, the results of nonlinear curve fitting between the MWCO and the nanoparticle size show a high accuracy, which implies that the MWCO of the ceramic membranes can be predicted using the curve fitting model with variously sized nanoparticles in the filtration-coating process. In conclusion, the novel filtration-coating method enables precise pore control and provides a tunable MWCO to ceramic membranes by preparing various sizes of nanoparticles.
ABSTRACT
Carbon molecular sieve (CMS) membranes have been developed to replace or support energy-intensive cryogenic distillation for olefin/paraffin separation. Olefin and paraffin have similar molecular properties, but can be separated effectively by a CMS membrane with a rigid, slit-like pore structure. A variety of polymer precursors can give rise to different outcomes in terms of the structure and performance of CMS membranes. Herein, for olefin/paraffin separation, the CMS membranes derived from a number of polymer precursors (such as polyimides, phenolic resin, and polymers of intrinsic microporosity, PIM) are introduced, and olefin/paraffin separation properties of those membranes are summarized. The effects from incorporation of inorganic materials into polymer precursors and from a pyrolysis process on the properties of CMS membranes are also reviewed. Finally, the prospects and future directions of CMS membranes for olefin/paraffin separation and aging issues are discussed.
ABSTRACT
With the emergence of the coronavirus disease (COVID-19), it is essential that face masks demonstrating significant anti-droplet and hydrophobic characteristics are developed and distributed. In this study, a commercial compressed-polyurethane (C-PU) mask was modified by applying a hydrophobic and anti-droplet coating using a silica sol, which was formed by the hydrolysis of tetraethoxysilane (TEOS) under alkaline conditions and hydrolyzed hexadecyltrimethoxysilane (HDTMS) to achieve hydrophobization. The modified mask (C-PU/Si/HDTMS) demonstrated good water repellency resulting in high water contact angle (132°) and low sliding angle (17°). Unmodified and modified masks were characterized using attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). A drainage test confirmed the strong interaction between the mask surface and coating. Moreover, the coating had negligible effect on the average pore size of the C-PU mask, which retained its high breathability after modification. The application of this coating is a facile approach to impart anti-droplet, hydrophobic, and self-cleaning characteristics to C-PU masks.
ABSTRACT
Organic solvent nanofiltration (OSN) has made significant advances recently, and it is now possible to fabricate thin film composite (TFC) membranes with a selective layer thickness below 10 nm that gives ultrafast solvent permeance. However, such high permeance is inadvertently limited by the support membrane beneath the selective layer, and thus there is an urgent need to develop a suitable support to maximize TFC performance. In this work, we employed a commercially available polyethylene (PE) battery separator as a porous support to fabricate high performance TFC OSN membranes. To deposit a uniform polyamide selective layer onto the porous support via interfacial polymerization, the PE support was hydrophilized with O2 plasma and the reaction efficiency was optimized using a surfactant. Owing to the high surface porosity of the PE support and the high permselectivity of the PA layer, the PE-supported TFC membrane outperformed the previously reported OSN membranes and its performance exceeded the current performance upper bound. A solvent activation step dramatically improved the solvent permeance by 5-fold while maintaining nanoseparation properties. In addition to the superior OSN performance, the commercial availability of the PE support and simplified TFC fabrication protocol would make the PE-supported OSN membranes commercially attractive.
ABSTRACT
Recently, feed spacer research for improving the performance of a membrane module has adopted three-dimensional (3D) printing technology. This study aims to improve the performance of membrane feed spacers by using various materials and incorporating 3D printing. The samples were fabricated after modeling with 3D computer-aided design (CAD) software to investigate the mechanical strength, water flux, reverse solute flux, and fouling performances. This research was performed using acrylonitrile butadiene styrene (ABS), polypropylene (PP), and natural polylactic acid (PLA) as printing material, and the spacer model was produced using a diamond-shaped feed spacer, with a commercially available product as a reference. The 3D printed samples were initially compared in terms of size and precision with the 3D CAD model, and deviations were observed between the products and the CAD model. Then, the spacers were tested in terms of mechanical strength, water flux, reverse solute flux, and fouling (alginate-based waste water was used as a model foulant). Although there was not much difference among the samples regarding the water flux, better performances than the commercial product were obtained for reverse solute flux and fouling resistance. When comparing the prominent performance of natural PLA with the commercial product, PLA was found to have approximately 10% less fouling (based on foulant volume per unit area and root mean square roughness values), although it showed similar water flux. Thus, another approach has been introduced for using bio-degradable materials for membrane spacers.
