Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 5 de 5
Filter
1.
PLoS One ; 13(6): e0199638, 2018.
Article in English | MEDLINE | ID: mdl-29953491

ABSTRACT

INTRODUCTION: Although Sensititre Mycobacterium tuberculosis (MYCOTB) plate offers both drug susceptibility testing (DST) and minimum inhibitory concentration (MIC) results, it has not been evaluated against both Lowenstein Jensen (LJ) and Middlebrook 7H10 (MB7H10) DST methods at standard critical concentrations. MATERIALS AND METHODS: We analyzed 76 M. tuberculosis isolates consisting of 54 isolates from the Uganda National TB drug resistance survey done December 2009-February 2011 and 22 isolates from the World Health Organization External Quality Assessment panel for the year 2011. All isolates were tested for LJ, MB7H10 and MYCOTB plate based DSTs for streptomycin, isoniazid, rifampicin and ethambutol anti-tuberculosis drugs. The agreement of MB7H10 with LJ and accuracy of MYCOTB plate using either LJ-DST or MB7H10 as a reference standard were determined. RESULTS: The agreement (kappa) of MB7H10 with LJ was; 0.687 for rifampicin, 0.498 for isoniazid, 0.275 for streptomycin and 0.082 for ethambutol which as almost similar when compared with MYCOTB plate. The sensitivity (95% confidence interval; CI) of MYCOTB plate when LJ was used as a reference standard was higher for streptomycin 87.5% (81.6-98.4) followed by isoniazid 75.9% (65.1-95.6) and rifampicin 73.1% (52.2-88.4). When MB7H10 was used as reference standard, the sensitivity of MYCOTB plate improved significantly; isoniazid 96.2% (80.3-99.9), rifampicin 94.0 (83.4-98.7) and 93.8% (69.7-99.8). There was good agreement between MYCOTB plate and MB7H10; 1.00 for ethambutol, 0.959 for streptomycin, 0.915 for rifampicin and 0.778 for isoniazid. CONCLUSIONS: The performance of the two culture-based reference standards for phenotypic first-line drug susceptibility testing methods, LJ and MB7H10, varied much even with acceptable MYCOTB plate MICs. There was acceptable agreement and accuracy of MYCOTB plate for drug susceptibility testing when MB7H10 was used as reference standard than with LJ-DST. Results from MIC information makes the MYCOTB plate more suitable for guiding clinicians on the choice of the most appropriate TB treatment regimen as well as limits of detection for TB drug resistance.


Subject(s)
Antitubercular Agents/pharmacology , Microbial Sensitivity Tests/instrumentation , Mycobacterium tuberculosis/drug effects , Drug Resistance, Bacterial , Humans , Microbial Sensitivity Tests/methods , Microbial Sensitivity Tests/standards , Mycobacterium tuberculosis/isolation & purification , Reference Standards , Tuberculosis, Multidrug-Resistant/drug therapy , Tuberculosis, Multidrug-Resistant/microbiology
2.
Health Res Policy Syst ; 13: 4, 2015 Jan 15.
Article in English | MEDLINE | ID: mdl-25589057

ABSTRACT

BACKGROUND: Despite the recent innovations in tuberculosis (TB) and multi-drug resistant TB (MDR-TB) diagnosis, culture remains vital for difficult-to-diagnose patients, baseline and end-point determination for novel vaccines and drug trials. Herein, we share our experience of establishing a BSL-3 culture facility in Uganda as well as 3-years performance indicators and post-TB vaccine trials (pioneer) and funding experience of sustaining such a facility. METHODS: Between September 2008 and April 2009, the laboratory was set-up with financial support from external partners. After an initial procedure validation phase in parallel with the National TB Reference Laboratory (NTRL) and legal approvals, the laboratory registered for external quality assessment (EQA) from the NTRL, WHO, National Health Laboratories Services (NHLS), and the College of American Pathologists (CAP). The laboratory also instituted a functional quality management system (QMS). Pioneer funding ended in 2012 and the laboratory remained in self-sustainability mode. RESULTS: The laboratory achieved internationally acceptable standards in both structural and biosafety requirements. Of the 14 patient samples analyzed in the procedural validation phase, agreement for all tests with NTRL was 90% (P <0.01). It started full operations in October 2009 performing smear microscopy, culture, identification, and drug susceptibility testing (DST). The annual culture workload was 7,636, 10,242, and 2,712 inoculations for the years 2010, 2011, and 2012, respectively. Other performance indicators of TB culture laboratories were also monitored. Scores from EQA panels included smear microscopy >80% in all years from NTRL, CAP, and NHLS, and culture was 100% for CAP panels and above regional average scores for all years with NHLS. Quarterly DST scores from WHO-EQA ranged from 78% to 100% in 2010, 80% to 100% in 2011, and 90 to 100% in 2012. CONCLUSIONS: From our experience, it is feasible to set-up a BSL-3 TB culture laboratory with acceptable quality performance standards in resource-limited countries. With the demonstrated quality of work, the laboratory attracted more research groups and post-pioneer funding, which helped to ensure sustainability. The high skilled experts in this research laboratory also continue to provide an excellent resource for the needed national discussion of the laboratory and quality management systems.


Subject(s)
Clinical Laboratory Techniques/standards , Laboratories/economics , Laboratories/standards , Tuberculosis/diagnosis , Antitubercular Agents/pharmacology , Clinical Laboratory Techniques/economics , Developing Countries/economics , Feasibility Studies , Humans , Laboratories/organization & administration , Microbial Sensitivity Tests/standards , Quality Assurance, Health Care , Tuberculosis/drug therapy , Tuberculosis/epidemiology , Tuberculosis, Multidrug-Resistant/diagnosis , Tuberculosis, Multidrug-Resistant/drug therapy , Tuberculosis, Multidrug-Resistant/epidemiology , Uganda/epidemiology
3.
BMC Infect Dis ; 14: 481, 2014 Sep 04.
Article in English | MEDLINE | ID: mdl-25190040

ABSTRACT

BACKGROUND: Introduction of Xpert® MTB/RIF assay has revolutionalised the diagnosis of tuberculosis (TB) by simultaneously detecting the bacteria and resistance to rifampicin (rif), a surrogate marker for multi-drug resistant TB (MDR-TB) as well as one of the principal first-line anti-tuberculosis drugs. In general, rpoB mutations can be found in 96.1% of rif-resistant Mycobacterium tuberculosis (MTB) strains worldwide and these mutations usually are located in a region at the 507-533rd amino acid residuals (81 bp) in the MTB rpoB gene, which is referred to as Rifampicin-resistance-determining region (RRDR). In this study, we determined the frequency of MDR-TB in Kampala using Xpert® MTB/RIF in comparison with the agar proportion method using Middlebrook 7H11and further determined the frequency of probes for different rpoB gene mutations using Xpert® MTB/RIF assay in the 81 bp RRDR. METHODS: A total of 1501 specimens received at Mycobacteriology laboratory, Makerere University for Xpert testing between May 2011 and May 2014 were analysed by Xpert® MTB/RIF assay. Specimens that were positive for both MTB and rifampicin resistance were further subjected to a complete first line anti-mycobacterial drug susceptibility testing using Middlebrook 7H11 agar proportion method (APM). RESULTS: Xpert® MTB/RIF assay detected 313 MTB positive specimens and out of which 12 specimens had both MTB and rifampicin- resistance conferred by four different rpoB gene mutations in the 81 bp-RRDR of MTB, further one (1/12), specimen was found to be rifampicin mono-resistant on APM while the 11 were found to be MDR-TB. Probes associated with the observed rif- resistance were as follows: E (7/12), B (3/12), A (1/12), D (1/12) and no rif-resistance was associated with probe C. No specimen yielded rif-resistance associated with more than one probe failure (mutation combinations). Probe D was associated with rifampicin mono-resistant. CONCLUSIONS: MDR-TB was at 3.5% in the studied population. Mutations associated with Probe E (58%) also known as codons 531and 533 are the commonest rpoB gene mutation identified by Xpert® MTB/RIF assay in this setting and mutations identified by probe E of the assay, turned out to be MDR-TB strains by agar proportion method antimicrobial susceptibility testing. No mutation was detected in the codon 522.


Subject(s)
Bacterial Proteins/genetics , Drug Resistance, Bacterial , Mycobacterium tuberculosis/drug effects , Mycobacterium tuberculosis/isolation & purification , Rifampin/pharmacology , Tuberculosis, Multidrug-Resistant/microbiology , DNA-Directed RNA Polymerases , Humans , Mutation , Mycobacterium tuberculosis/genetics , Reagent Kits, Diagnostic , Retrospective Studies , Tuberculosis, Multidrug-Resistant/diagnosis , Tuberculosis, Multidrug-Resistant/epidemiology , Uganda/epidemiology
4.
Antimicrob Agents Chemother ; 58(1): 11-8, 2014.
Article in English | MEDLINE | ID: mdl-24100497

ABSTRACT

For Mycobacterium tuberculosis, phenotypic methods for drug susceptibility testing of second-line drugs are poorly standardized and technically challenging. The Sensititre MYCOTB MIC plate (MYCOTB) is a microtiter plate containing lyophilized antibiotics and configured for determination of MICs to first- and second-line antituberculosis drugs. To evaluate the performance of MYCOTB for M. tuberculosis drug susceptibility testing using the Middlebrook 7H10 agar proportion method (APM) as the comparator, we conducted a two-site study using archived M. tuberculosis isolates from Uganda and the Republic of Korea. Thawed isolates were subcultured, and dilutions were inoculated into MYCOTB wells and onto 7H10 agar. MYCOTB results were read at days 7, 10, 14, and 21; APM results were read at 21 days. A total of 222 isolates provided results on both platforms. By APM, 106/222 (47.7%) of isolates were resistant to at least isoniazid and rifampin. Agreement between MYCOTB and APM with respect to susceptibility or resistance was ≥92% for 7 of 12 drugs when a strict definition was used and ≥96% for 10 of 12 drugs when agreement was defined by allowing a ± one-well range of dilutions around the APM critical concentration. For ethambutol, agreement was 80% to 81%. For moxifloxacin, agreement was 83% to 85%; incorporating existing DNA sequencing information for discrepant analysis raised agreement to 91% to 96%. For MYCOTB, the median time to plate interpretation was 10 days and interreader agreement was ≥95% for all drugs. MYCOTB provided reliable results for M. tuberculosis susceptibility testing of first- and second-line drugs except ethambutol, and results were available sooner than those determined by APM.


Subject(s)
Antitubercular Agents/pharmacology , Mycobacterium tuberculosis/drug effects , Ethambutol/pharmacology , Fluoroquinolones/pharmacology , Isoniazid/pharmacology , Microbial Sensitivity Tests , Moxifloxacin , Rifampin/pharmacology
5.
Tuberc Res Treat ; 2012: 970203, 2012.
Article in English | MEDLINE | ID: mdl-23304491

ABSTRACT

The World Health Organization (WHO) recommends collection of two sputum samples for tuberculosis (TB) diagnosis, with at least one being an early morning (EM) using smear microscopy. It remains unclear whether this is necessary even when sputum culture is employed. Here, we determined the diagnostic yield from spot and the incremental yield from the EM sputum sample cultures among TB-suspected adolescents from rural Uganda. Sputum samples (both spot and early-morning) from 1862 adolescents were cultured by the Lowenstein-Jensen (LJ) and Mycobacterium Growth Indicator Tube (MGIT) methods. For spot samples, the diagnostic yields for TB were 19.0% and 57.1% with LJ and MGIT, respectively, whereas the incremental yields (not totals) of the early-morning sample were 9.5% and 42.9% (P < 0.001) with LJ and MGIT, respectively. Among TB-suspected adolescents in rural Uganda, the EM sputum culture has a high incremental diagnostic yield. Therefore, EM sputum in addition to spot sample culture is necessary for improved TB case detection.

SELECTION OF CITATIONS
SEARCH DETAIL
...