Exogenous GABA supplementation to facilitate Cr (III) tolerance and lipid biosynthesis in Chlorella sorokiniana.

Microalgae possess the prospective to be efficiently involved in bioremediation and biodiesel generation. However, conditions of stress often restrict their growth and diminish different metabolic processes. The current study evaluates the potential of GABA to improve the growth of the microalga Chlorella sorokiniana under Cr (III) stress through the exogenous administration of GABA. The research also investigates the concurrent impact of GABA and Cr (III) stress on various metabolic and biochemical pathways of the microalgae. In addition to the control, cultures treated with Cr (III), GABA, and both Cr (III) and GABA treated were assessed for accurately analysing the influence of GABA. The outcomes illustrated that GABA significantly promoted growth of the microalgae, resulting in higher biomass productivity (19.14 mg/L/day), lipid productivity (3.445 mg/L/day) and lipid content (18%) when compared with the cultures under Cr (III) treatment only. GABA also enhanced Chl a content (5.992 µg/ml) and percentage of protein (23.75%). FAMEs analysis by GC-MS and total lipid profile revealed that GABA treatment can boost the production of SFA and lower the level of PUFA, a distribution ideal for improving biodiesel quality. ICP-MS analysis revealed that GABA supplementation could extend Cr (III) mitigation level up to 97.7%, suggesting a potential strategy for bioremediation. This novel study demonstrates the merits of incorporating GABA in C. sorokiniana cultures under Cr (III) stress, in terms of its potential in bioremediation and biodiesel production without disrupting the pathways of photosynthesis and protein production.

Algae: A promising and sustainable protein-rich food ingredient for bakery and dairy products.

The consumer demand for protein rich foods urges the exploration for novel products of natural origin. Algae can be considered as a gold mine of different bioactive compounds, among which protein is distributed in significant amounts i.e., around 30% and can even reach to 55-60% in some cyanobacteria. Bakery and dairy products are extensively consumed worldwide due to product diversification and innovation. However, incorporation of algae biomass can lead to the development of green colour and fishy flavour that usually is not accepted in such products. Therefore, isolation and application of algae-derived proteins opens a new door for food industry. The present review provides a comprehensive understanding of incorporation of algae as a protein-rich ingredient in bakery and dairy products. The paper provides a deep insight for all the possible recent trends related to production and extraction of algae proteins accompanied by their incorporation in bakery and dairy foods.

Synergistic interaction between hydrocolloids and kinnow peel biowaste for the development of edible fillers using response surface methodology.

Rapidly rising societal awareness about the planet sustainability through developing environmentally friendly and biodegradable alternatives to current impact of plastics waste represents an emerging need for establishing a circular bioeconomy of cleaner, safer, greener, and sustainable future. Until now, no investigation has been done on edible tableware made from leftover fruit peels. Presently, Kinnow mandarin is the most commercially farmed citrus fruit commodity, with the highest production, productivity, and popularity among all horticulture crops worldwide, generating vast quantity of peels ending up as putrefying biowaste that impacts ecosystem health. Sustainable efforts are therefore required in the circular economy to develop a creative and comprehensive strategy to address aforementioned issues, raising profitability, enhancing processing efficiency, and exploring "taste over waste," which contributes to overall sustainability. Therefore, in the current study, we established an approach for transforming the citrus peels biowaste into food-related end products by creating edible fillers, which is a sustainable material in terms of its functional, physical, and microbiological qualities for holding of confectionery products. The optimum level of independent variables with maximum desirability were found to be 0.75% calcium chloride concentration, 1.01% agar concentration, and 10% moisture content. A significant (p < 0.05) effect of process parameters was found in all responses. Model validation revealed that the model developed was accurate, with a prediction error ranging from - 9.96 to 3.28%. The technology developed for biowaste-based biofillers is still in a nascent stage, and it is expected that significant advancements will be made in the bio-refinery industries that can make edible fillers a reality in the future and might be helpful in contributing towards sustainable development. This research also demonstrated an efficient and novel approach towards a "zero-waste."

Enhancing the bio-prospective of microalgae by different light systems and photoperiods.

Microalgae are a source of highly valuable bioactive metabolites and a high-potential feedstock for environmentally friendly and sustainable biofuel production. Recent research has shown that microalgae benefit the environment using less water than conventional crops while increasing oxygen production and lowering CO2 emissions. Microalgae are an excellent source of value-added compounds, such as proteins, pigments, lipids, and polysaccharides, as well as a high-potential feedstock for environmentally friendly and sustainable biofuel production. Various factors, such as nutrient concentration, temperature, light, pH, and cultivation method, effect the biomass cultivation and accumulation of high-value-added compounds in microalgae. Among the aforementioned factors, light is a key and essential factor for microalgae growth. Since photoautotrophic microalgae rely on light to absorb energy and transform it into chemical energy, light has a significant impact on algal growth. During micro-algal culture, spectral quality may be tailored to improve biomass composition for use in downstream bio-refineries and boost production. The light regime, which includes changes in intensity and photoperiod, has an impact on the growth and metabolic composition of microalgae. In this review, we investigate the effects of red, blue, and UV light wavelengths, different photoperiod, and different lighting systems on micro-algal growth and their valuable compounds. It also focuses on different micro-algal growth, photosynthesis systems, cultivation methods, and current market shares.

Bio-oil and biochar production from Ageratum conyzoides using triple-stage hydrothermal liquefaction and utilization of biochar in removal of multiple heavy metals from water.

Production of low-cost biomass and its utilization for producing cost effective and eco-friendly bioenergy as well as for removing heavy metals from water can be explored as an approach to meet the sustainable development goals. In light of the above-mentioned study, hydrothermal liquefaction (HTL) of Billy goat weed (BGW; Ageratum conyzoides) was carried out to produce bio-oil. In addition, the residual biochar from the HTL process was activated to obtain Act-BC and was further modified to produce MnO2-loaded biochar (Act-BC@MnO2-25%). The HTL of BGW was done at three different temperatures, i.e., 250 °C, 350 °C and 450 °C in a high-pressure batch reactor to maximize the bio-oil yield. Also, two different HTL methods i.e., single-stage HTL and triple-stage HTL of BGW were compared and discussed in detail. The bio-oil obtained via the triple-stage HTL was rich in carbon, hydrogen, and nitrogen. It also showed a higher heating value (HHV) and bio-oil yield (46%) than the single-stage. The residual biochar obtained at 450 °C (Act-BC) and MnO2 modified (Act-BC@MnO2-25%) were then tested to adsorb multiple heavy metal (i.e., Pb(II), Cd(II), Cu(II), and Ni(II)) from water. The kinetics data obtained from the adsorption experiment with Act-BC@MnO2-25% were well fitted to PSO kinetics model. The isotherm data were well aligned with the Langmuir model; the adsorption capacity of Act-BC@MnO2-25% was estimated to be 198.70 ± 11.40 mg g-1, 93.70 ± 6.60 mg g-1, 78.90 ± 7.20 mg g-1 and 30.50 ± 2.10 mg g-1 for Pb(II), Cd(II), Cu(II), and Ni(II), respectively. Furthermore, Act-BC@MnO2-25% remained active for metal ions absorption even after six consecutive uses. The result obtained from this study clearly demonstrates that the triple-stage HTL of BGW is a promising technology to achieve both remediation of metal-contaminated water and production of bioenergy.

Heavy metal tolerance in microalgae: Detoxification mechanisms and applications.

The proficiency of microalgae to resist heavy metals has potential to be beneficial in resolving various environmental challenges. Global situations such as the need for cost-effective and ecological ways of remediation of contaminated water and for the development of bioenergy sources could employ microalgae. In a medium with the presence of heavy metals, microalgae utilize different mechanisms to uptake the metal and further detoxify it. Biosorption and the next process of bioaccumulation are two such major steps and they also include the assistance of different transporters at different stages of heavy metal tolerance. This capability has also proved to be efficient in eradicating many heavy metals like Chromium, Copper, Lead, Arsenic, Mercury, Nickel and Cadmium from the environment they are present in. This indicates the possibility of the application of microalgae as a biological way of remediating contaminated water. Heavy metal resistance quality also allows various microalgal species to contribute in the generation of biofuels like biodiesel and biohydrogen. Many research works have also explored the capacity of microalgae in nanotechnology for the formation of nanoparticles due to its relevant characteristics. Various studies have also revealed that biochar deduced from microalgae or a combination of biochar and microalgae can have wide applications specially in deprivation of heavy metals from an environment. This review focuses on the strategies adopted by microalgae, various transporters involved in the process of tolerating heavy metals and the applications where microalgae can participate owing to its ability to resist metals.

Sustainable algal biorefineries: capitalizing on many benefits of GABA.

We provide physiological and metabolic insights into the complex role of γ-aminobutyric acid (GABA) in fine-tuning algal metabolism to improve productivity. Genetic engineering strategies to improve algal GABA biosynthesis are also discussed. Our aim is to provide an understanding of how GABA can be used for cost-competitive algae-based biofuels and bioproducts.

Impact of pyrene (polycyclic aromatic hydrocarbons) pollutant on metabolites and lipid induction in microalgae Chlorella sorokiniana (UUIND6) to produce renewable biodiesel.

Pyrene (polycyclic aromatic hydrocarbon), an anthropogenic organic pollutant prevalent in various ecological units, receives more attention for bioremediation and energy transformation using microalgae. In this study, we have used pyrene pollutant (50-500 ppm) to evaluate the half-maximal inhibitory concentrations (IC50) of Chlorella sorokiniana and the impact on metabolites as well as the induction of lipid biosynthesis to produce renewable biodiesel. Pyrene concentration at 230 ppm (IC50) caused half-maximum inhibition for the 96 h incubation. The harvest in the stationary stage (day 16) for C. sorokiniana revealed a biomass generation of 449 ± 7 mg L-1 and 444 ± 8 mg L-1 dcw in the control medium and pyrene IC50 medium, respectively. An insignificant decline in biomass generation (1.2%) was observed due to the stress effect of the pyrene IC50 medium on metabolic biosynthesis. Although contrary to biomass generation, IC50 of pyrene assisted to induce lipid biosynthesis in C. sorokiniana. The improvement in lipid biosynthesis was observed as ~24% higher in pyrene IC50 compared to the control medium. The chemical composition of the microalgae biomass, metabolites, and lipids was examined using FTIR spectra. The extracted lipid was transesterified to produce biodiesel via methanolic-H2SO4 catalysis. The renewable biodiesel obtained was evaluated using FTIR and 1H NMR spectra. The transformation efficiency of the lipid of C. sorokiniana in biodiesel was calculated as ~81%. This research offers the incentive in lipid biosynthesis in microalgae cells using pyrene for the production of renewable and sustainable ecological biofuels along with bioremediation of pyrene.

The potential of nuclear magnetic resonance (NMR) in metabolomics and lipidomics of microalgae- a review.

Microalgae biotechnology has made it possible to derive secondary bioactive metabolites from microalgae strains that have opened up their entire potential to uncover a wide range of novel metabolic capabilities and turn these into bio-products for the development of sustainable bio-refineries. Nuclear Magnetic Resonance Technology (NMR) has been one of the most successful and functional research technology over the past two decades to analyse the composition, structure and functionality of distinct metabolites in the different microalgae strains. This technology offers qualitative as well as quantitative knowledge about the endogenous metabolites and lipids of low molecular mass to offer a good picture of the physiological state of biological samples in metabolomics and lipidomics studies. Henceforth, this review is aimed at introducing the metabolomics and lipidomics studies into the field of NMR technology and also highlights the protocols for the isolation and metabolic measurements of metabolites from microalgae that should be redirected to resource recovery and value-added products with a systematic and holistic approach for scalability or sustainability.

Graphitic bio-char and bio-oil synthesis via hydrothermal carbonization-co-liquefaction of microalgae biomass (oiled/de-oiled) and multiple heavy metals remediations.

Thermochemical transformation of microalgae biomass into graphitic bio-chars entices as proficient bio-adsorbents for heavy metal contaminants. This study explores the synergistic impact of Chlorella sorokiniana on biomass generation and wastewater remediation in high rate algae pond (HRAP). Biomass produced was applied for hydrothermal carbonization-co-liquefaction (HTCL). The structural and morphological characteristics of HTCL products (i.e. bio-chars and bio-oils) have been systematically studied by XRD, Raman, FTIR, elemental analyzer, SEM, BET, and 1H NMR spectroscopy. The crystallite size of the graphite 2H indexing planes was to be 4.65 nm and 14.07 nm in the bio-chars of oiled biomass (MB-OB) and de-oiled biomass (MB-DOB), respectively. The increase in the ID/IG ratio of MB-DOB indicated the highly disordered graphitic structure due to the appearance of carbonyl, hydroxyl, and epoxy functionalities in the line of high C/N and low C/H ratio. Also, the multiple heavy metals remediation of MB-DOB revealed better efficiency as ~100% in 720 min. The kinetics analysis shows the correlation coefficient of pseudo-second-order is well fitted compared to the pseudo-first-order. The Langmuir adsorption model signifies the adsorption of heavy metal ions in a monolayer adsorption manner. The study proposes the microalgae bio-char potential for multiple heavy metals remediation alongside bio-oils.

Small-scale phyco-mitigation of raw urban wastewater integrated with biodiesel production and its utilization for aquaculture.

A low-cost small-scale high-rate algal pond (HRAP) was constructed to investigate the synergistic potential of a novel oleaginous microalga, Chlorella sorokiniana for phyco-mitigation, and biodiesel production using raw urban wastewater. An enhanced nutrient removal (97%), total organic carbon (74%), alkalinity (70%) and hardness (75%) from the wastewater was obtained. The microalga dominated in the HRAP as ~90% increase in the dissolved oxygen with high biomass (1.13 g/L) was noted. The microalga biomass showed sufficient lipid content (~31% of dry cell weight) as compared to control (Bold's Basal media). The total lipid profiling of the microalga cultivated in wastewater showed augmentation in the levels of both storage and neutral lipids with good quality fatty acids composition. Moreover, the sucker fishes grew healthy in the treated wastewater with an increase in body weight.

Low-temperature catalyst based Hydrothermal liquefaction of harmful Macroalgal blooms, and aqueous phase nutrient recycling by microalgae.

The present study investigates the hydrothermal liquefaction (HTL) of harmful green macroalgal blooms at a temperature of 270 °C with, and without a catalyst with a holding time of 45 min. The effect of different catalysts on the HTL product yield was also studied. Two separation methods were used for recovering the biocrude oil yield from the solid phase. On comparision with other catalyst, Na2CO3 was found to produce higher yiled of bio-oil. The total bio-oil yield was 20.10% with Na2CO3, 18.74% with TiO2, 17.37% with CaO, and 14.6% without a catalyst. The aqueous phase was analyzed for TOC, COD, TN, and TP to determine the nutrient enrichment of water phase for microalgae cultivation. Growth of four microalgae strains viz., Chlorella Minutissima, Chlorella sorokiniana UUIND6, Chlorella singularis UUIND5 and Scenedesmus abundans in the aqueous phase were studied, and compared with a standard growth medium. The results indicate that harmful macroalgal blooms are a suitable feedstock for HTL, and its aqueous phase offers a promising nutrient source for microalgae.

Evaluation, comparison of different solvent extraction, cell disruption methods and hydrothermal liquefaction of Oedogonium macroalgae for biofuel production.

Cell disruption and lipid extraction methods for macroalgae are not well reported. Therefore, we compared various lipid extraction methods and extraction efficiency of various solvents to improve lipid yields from Oedogonium fresh water macroalgae. Lipid extraction was done by 2 methods viz., modified Bligh and Dyer method and soxhlet extraction using either single solvents or mixtures. In soxhlet extraction method five solvents were used (1) Hexane commonly used solvent for lipid extractions, (2) chloroform: methanol (2:1), (3) Chloroform: hexane (1:1), (4) Chloroform: hexane (1:2), (5) Dichloromethane + methanol (2:1). To improve lipid extraction yields, various cell disruption methods were also compared during the present study. Impurities of chlorophyll and protein were also detected in the extracted lipids. Hydrothermal liquefaction of algal biomass with TiO2 was also conducted at 300 °C. HTL was more effective by which 23.3 wt% of bio-crude oil was obtained.

Multimetal tolerance mechanisms in bacteria: The resistance strategies acquired by bacteria that can be exploited to 'clean-up' heavy metal contaminants from water.

Heavy metal pollution is one of the major environmental concerns worldwide. Toxic heavy metals when untreated get accumulated in environment and can pose severe threats to living organisms. It is well known that metals play a major role either directly or indirectly in different metabolic processes of bacteria. This allows bacterial cells to grow even in the presence of some toxic heavy metals. Microbial biotechnology has thus emerged as an effective and eco friendly solution in recent years for bioremediation of heavy metals. Therefore, this review is focused on summarising bacterial adaptation mechanisms for various heavy metals. It also shares some applications of have metal tolerant bacteria in bioremediation. Bacteria have evolved a number of processes for heavy metal tolerance viz., transportation across cell membrane, accumulation on cell wall, intra as well as extracellular entrapment, formation of complexes and redox reactions which form the basis of different bioremediation strategies. The genetic determinants for most of these resistances are located on plasmids however some may be chromosomal as well. Bacterial cells can uptake heavy by both ATP dependent and ATP independent processes. Bacterial cell wall also plays a very important role in accumulating heavy metals by bacterial cells. Gram-positive bacteria accumulate much higher concentrations of heavy metals on their cell walls than that of metals gram -ve bacteria. The role of bacterial metallothioneins (MTs) in heavy metal has also been reported. Thus, heavy metal tolerant bacteria are important for bioremediation of heavy metal pollutants from areas containing high concentrations of particular heavy metals.

Detoxification mechanism of organophosphorus pesticide via carboxylestrase pathway that triggers de novo TAG biosynthesis in oleaginous microalgae.

Organophosphorus compounds exhibit a wide range of toxicity to mammals. In this study the effect of malathion on the growth and biochemical parameters of microalgae was evaluated. Three microalgae (Micractinium pusillum UUIND2, Chlorella singulari UUIND5 and Chlorella sorokiniana UUIND6) were used in this study. Among the three algal strains tested, Chlorella sorokiniana UUIND6 was able to tolerate 100 ppm of malathion. The photosynthetic pigments, the protein, carbohydrate and lipid contents of microalgal cells were also analyzed. About 90% degradation was recorded in 25 ppm, 50 ppm and 70% was recorded in 100 ppm of malathion by Chlorella sorokiniana. A mechanism of degradation of malathion by Chlorella sorokiniana is proposed in this study. Activity of carboxylesterase was increased in algal cells cultivated in malathion containing medium which confirmed that malathion degraded into phosphate. Increased amount of Malondialdehye (MDA) indicate the development of free radicals under the stress of malathion which substantialy increase de novo TAG biosynthesis, while increased level of superoxide dismutase (SOD), ascorbate peroxidase (APX) and catalase (CAT) suggested their association in scavenging of free radical.

Pretreated animal and human waste as a substantial nutrient source for cultivation of microalgae for biodiesel production.

The use of human and animal wastes for fertilization of aquaculture ponds has been practiced for thousands of years. In the present work, we have used the excreta (human urine, poultry waste, cow dung, and urine) as a nutrient source for the cultivation of Chlorella singularis, Micractinium pusillum, and Chlorella sorokiniana strains of microalgae. Different solid wastes were treated with 60 mM H2SO4 for the extraction of nutrients. After treatment, the supernatant of different solid wastes and liquid waste were diluted 5, 10, 15, and 20% to be used as a media for the cultivation of microalgae. Chlorella sorokiniana was able to grow in all concentration of excreta media. The maximum growth rate 140 ± 3.1 mg/L/day and lipid production (45.5 ± 2.3 mg/L/day) was obtained in 20% poultry. Among the different excreta media used for cultivation of microalgae, poultry media displayed the best results and thus, should be used for large scale cultivation of microalgae.

Application of agar liquid-gel transition in cultivation and harvesting of microalgae for biodiesel production.

In order to increase microalgal biomass productivity efficient cultivation and harvesting methods are needed against the available traditional methods. The present study focuses on the same by harvesting microalgae using agar gel. Agar medium containing bold's basal medium (BBM) undergoes a thermoreversible gel transition. As compared to the traditional protocols, this gel is used to cultivate microalgae without even affecting the total productivity. To develop the gel for microalgae cultivation, agar was boiled in BBM. Then the agar was cooled to 35°C and microalgae culture was added to it. After seeding the microalgae the temperature of the agar was further decreased by 10°C to induce gelation. Instead of isolated cells microalgae were grown in clusters within the agar gel. Microalgal clusters gravimetrically settle at the bottom within 2h. In this method agar can be reused.