Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 141
Filter
1.
Angle Orthod ; 93(5): 566-571, 2023 09 01.
Article in English | MEDLINE | ID: mdl-37079796

ABSTRACT

OBJECTIVES: To clarify the effect of attachment types on bodily movement of the maxillary canine in aligner orthodontics. MATERIALS AND METHODS: Using an aligner, the canine was moved bodily by 0.1 mm distally as a target position. Orthodontic tooth movement was simulated using the finite element method (FEM). The alveolar socket was displaced in the same manner as the initial movement caused by elastic deformation of the periodontal ligament. First, the initial movement was calculated, and then the alveolar socket was displaced in the same direction and with the same magnitude as the initial movement. These calculations were repeated to move the teeth after placement of the aligner. The teeth and the alveolar bone were assumed to be rigid bodies. A FEM model of the aligner was made based on the crown surfaces. The thickness of the aligner was 0.45 mm, and its Young's modulus was 2 GPa. Three types of attachments-semicircular couple, vertical rectangular, and horizontal rectangular-were placed on the canine crown. RESULTS: Regardless of the type of attachment, upon placement of the aligner on the dentition the crown of the canine moved to the target position, while the apex hardly moved. That is, the canine tipped and rotated. After repeating the calculation, the canine became upright and moved bodily regardless of the attachment type. In the aligner without an attachment, the canine did not become upright. CONCLUSIONS: There was almost no difference among attachment types in terms of achieving bodily movement of the canine.


Subject(s)
Orthodontics , Orthodontics/methods , Finite Element Analysis , Periodontal Ligament , Cuspid , Tooth Crown , Tooth Movement Techniques/methods
2.
Orthod Craniofac Res ; 26(3): 371-377, 2023 Aug.
Article in English | MEDLINE | ID: mdl-36305223

ABSTRACT

OBJECTIVE: This retrospective two-centre study aimed to evaluate the occlusal outcomes in patients undergoing orthognathic surgery with clear aligners. METHODS: A retrospective chart review and occlusal outcomes for 15 patients (10 females and five males) with different types of dentofacial deformities in the anteroposterior, vertical and transverse dimensions, who underwent orthognathic surgery in conjunction with clear aligners were evaluated. Weighed Peer Assessment Rating (PAR) index scores of the pre-treatment and post-treatment digital models were used to assess initial complexity, final occlusal outcomes and degree of improvement with surgery and clear aligners. RESULTS: The mean post-treatment PAR score was 3.5 ± 2.54, which was a statistically significant improvement from the pre-treatment PAR score of 27.63 ± 12.09, an 87% improvement was achieved. All subcategories of the PAR index showed statistically significant improvement except for midline assessment component. CONCLUSIONS: Occlusal outcomes with aligners showed great improvement as indicated with the PAR index scores. Orthognathic surgical cases can be treated efficiently with aligners and future studies should compare occlusal outcomes between orthognathic surgical patients treated with clear aligners and those treated with fixed appliances.


Subject(s)
Malocclusion , Orthodontic Appliances, Removable , Orthognathic Surgery , Male , Female , Humans , Malocclusion/surgery , Retrospective Studies , Treatment Outcome
5.
Am J Orthod Dentofacial Orthop ; 161(5): 687-697.e3, 2022 May.
Article in English | MEDLINE | ID: mdl-35012806

ABSTRACT

INTRODUCTION: Vitamin E is a popular antioxidant suggested to affect bone turnover. However, the effects of a vitamin E enriched diet on the rate of tooth movement are unknown. Therefore, this study aimed to evaluate tooth movement in rats receiving a vitamin E enriched diet. In addition, we examined bone remodeling in experimental and control rats. METHODS: Thirty-two 6-week-old male rats were divided into 4 groups: (1) group 1 (n = 8): orthodontic tooth movement (OTM) for 4 days + regular diet; (2) group 2 (n = 8): OTM for 14 days + regular diet; (3) group 3 (n = 8): OTM for 4 days + vitamin E diet; and (4) group 4 (n = 8) - OTM for 14 days + vitamin E diet. Maxillary alveolar bones and femurs of rats were analyzed by microcomputed tomography and histology. RESULTS: Rats fed a vitamin E diet presented an increased OTM rate at days 4 and 14. We found an increased number of osteoclasts and decreased bone volume in the vitamin E diet group at day 14 of OTM. In addition, there was increased expression of the microphthalmia-associated transcription factor in the alveolar bone of the vitamin E diet group. In contrast, there was no difference in bone remodeling in femurs or alveolar bone at the control side. CONCLUSIONS: We found that an enriched vitamin E diet increases the rate of OTM in rats, suggesting that vitamin E may be useful as an avenue to accelerate OTM.


Subject(s)
Tooth Movement Techniques , Vitamin E , Animals , Bone Remodeling , Diet , Humans , Male , Maxilla , Osteoclasts , Rats , Vitamin E/pharmacology , X-Ray Microtomography
6.
Orthod Craniofac Res ; 25(2): 192-198, 2022 May.
Article in English | MEDLINE | ID: mdl-34344059

ABSTRACT

BACKGROUND: Direct and 3D-assisted methods are an available alternative when inserting temporary anchorage devices (TADs) in the anterior palate for orthodontic anchorage. This study aimed to evaluate the differences between a planned insertion versus a direct method on digital models. SETTINGS AND SAMPLE POPULATION: Seventy TADs were inserted by the direct insertion method in 35 patients who needed palatal TADs for orthodontic anchorage. For each patient, placement was independently planned by the superimposition of lateral cephalograms and corresponding plaster models. After mini-implant placement, impressions were taken with scanbodies. For the measurement of both linear and angle deviations, virtual planning models and postoperative oral scans were compared using 3D software for automatic surface registration and calculations. RESULTS: Comparing TADs positioned by the direct method and the digitally planned method, a mean linear distance was found of 2.54 ± 1.51 mm in the occlusal view and 2.41 ± 1.33 mm in the sagittal view. No significant difference has been found between TADs positioned in the right and left palatal sides. A mean distance of 7.65 ± 2.16 mm was found between the tip of the digitally planned TAD and the central incisors root apex. CONCLUSIONS: Both direct and 3D-assisted TAD insertion methods are safe and accurate in the anterior palate. However, the use of insertion guides facilitates TAD insertion, allowing less-experienced clinicians to use palatal implants.


Subject(s)
Orthodontic Anchorage Procedures , Cone-Beam Computed Tomography , Humans , Imaging, Three-Dimensional/methods , Orthodontic Anchorage Procedures/methods , Palate/diagnostic imaging
7.
Angle Orthod ; 92(1): 64-72, 2022 Jan 01.
Article in English | MEDLINE | ID: mdl-34587241

ABSTRACT

OBJECTIVES: To assess the changes in alveolar bone of the mandibular second molars following molar protraction and investigate the factors associated with the alveolar bone changes. MATERIALS AND METHODS: Cone-beam computed tomography of 29 patients (mean age 22.0 ± 4.2 years) who had missing mandibular premolars or first molars and underwent molar protraction were reviewed. Alveolar bone level was measured as the distance from the cementoenamel junction at six points, buccal, lingual, mesiobuccal (MB), mesiolingual (ML), distobuccal (DB), and distolingual (DL), of the second molars at pretreatment (T0) and after molar protraction (T1). Factors associated with alveolar bone changes at the distal and mesial of the second molars were assessed. RESULTS: Mean alveolar bone changes ranged from -1.2 mm (bone apposition) to 0.8 mm (bone resorption). The presence of a third molar impaction at T0 (P < .001), third molar angulation at T0 (P < .001), and Nolla's stage of third molar at T0 (P = .005) were significantly associated with alveolar bone level changes distal to the second molars. Treatment duration (P = .028) was significantly associated with alveolar bone level changes mesial to the second molar. CONCLUSIONS: Patients with impacted third molars, third molars at an earlier stage of development, and mesially angulated third molars at pretreatment may have less alveolar bone resorption distal to the second molars following protraction. Patients with increased treatment time may have reduced alveolar bone resorption mesial to the second molars.


Subject(s)
Mandible , Tooth, Impacted , Adolescent , Adult , Bicuspid/diagnostic imaging , Cone-Beam Computed Tomography , Humans , Mandible/diagnostic imaging , Molar/diagnostic imaging , Molar, Third/diagnostic imaging , Young Adult
8.
Eur J Orthod ; 43(1): 15-24, 2021 01 29.
Article in English | MEDLINE | ID: mdl-32077935

ABSTRACT

OBJECTIVE: The aim of this study was to evaluate and compare the amount of external apical root resorption (EARR) observed during the orthodontic treatment with pre-adjusted edgewise appliance (PEA) or clear aligner therapy (CAT) and with 2D or 3D radiographic methods of measuring the root resorption. SEARCH STRATEGY AND SELECTION CRITERIA: A search of PubMed MEDLINE, Scopus, Cochrane Central Register of Controlled Trials, LILACS, Web of Science, Dissertations & Theses Global, ClinicalTrials.gov registry, and the ISRCTN Registry was performed. Studies that have evaluated the amount of root resorption in non-extraction cases using CAT or PEA were selected for the systematic review. A meta-analysis was performed for the amount of root resorption of permanent maxillary incisors using PEA or CAT treatment modalities by either 2D or cone-beam computed tomography radiographic examination. DATA COLLECTION AND ANALYSIS: Database research, elimination of duplicate studies, data extraction, and risk of bias were performed by authors independently and in duplication. A random-effect meta-analysis followed by subgroup comparisons were performed to evaluate EARR. RESULTS: A total of 16 studies (4 were prospective and 12 were retrospective) were identified for inclusion in the systematic review. The mean root resorption for the permanent maxillary incisors was in the range from 0.25 to 1.13 mm (overall: 0.49 mm; 95% confidence interval [CI] = 0.24 to 0.75 mm). The mean root resorption difference between CAT and PEA was statistically significant (P < 0.05) for 12 but not for 21, 11, or 22. LIMITATIONS: One of the drawbacks is a lack of good quality prospective studies, specifically randomized clinical trials in the literature. CONCLUSIONS AND IMPLICATIONS: Neither PEA or CAT technique leads to clinically significant root resorption (1 mm) of the maxillary incisors. The amount of EARR of maxillary incisors is not significant in comparing two treatment modalities (PEA and CAT), except for 12, where the PEA group has significantly more EARR when compared to CAT. REGISTRATION: The protocol for this systematic review was based on the Cochrane Handbook for Systematic Reviews of Interventions 5.1.0 and was registered at PROSPERO database (https://www.crd.york.ac.uk/prospero/display_record.php?ID=CRD42018113051). This systematic review is reported according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement.


Subject(s)
Orthodontic Appliances, Removable , Root Resorption , Humans , Incisor/diagnostic imaging , Prospective Studies , Retrospective Studies , Root Resorption/diagnostic imaging , Root Resorption/etiology
9.
Eur J Orthod ; 43(6): 607-613, 2021 12 01.
Article in English | MEDLINE | ID: mdl-33300988

ABSTRACT

OBJECTIVE: The primary objective of this study was to quantify the orthodontic tooth movement (OTM) and orthodontically induced root resorption (OIRR) with differential force system in conjunction with minimal surgical insult. MATERIAL AND METHODS: 15-week-old, 48 male Wistar rats were used in the research and were randomly divided into six groups: 1. Group 1 (8 Wistar rats): OTM for 14 days with 8-g force; 2. Group 2 (8 Wistar rats): OTM for 14 days with 25-g force; 3. Group 3 (8 Wistar rats): OTM for 14 days with 100-g force; 4. Group 4 (8 Wistar rats): OTM for 14 days with 8-g force and alveolar decortications (ADs); 5. Group 5 (8 Wistar rats): OTM for 14 days with 25-g force and ADs; 6. Group 6 (8 Wistar rats): OTM for 14 days with 100-g force and ADs. A nickel-titanium spring was used to protract the molar mesially using maxillary incisors as an anchorage. ADs (minimal surgical insult) were done using a hand piece and a round bur, adjacent to the left first maxillary molar on the palatal alveolar bone. After 14 days of OTM, Wistar rats were killed and microfocus computed tomography and histological analysis were performed. RESULTS: The 100-g group showed significant increase (P < 0.05) in OTM. However, with ADs, the OTM was significantly higher (P < 0.05) in 8 and 100 g. In addition, with ADs, there is significant increase (P < 0.05) in OIRR and significant decrease (P < 0.05) in bone volume fraction. Histological quantification of tartrate-resistant acid phosphatase indicated a significant increase (P < 0.05) in the number of osteoclasts with ADs when compared without ADs. CONCLUSIONS: Light force in conjunction with ADs are optimal to accelerate the OTM. Additionally, ADs increases the OIRR.


Subject(s)
Root Resorption , Animals , Male , Rats , Gravitation , Molar/pathology , Osteoclasts/pathology , Rats, Wistar , Root Resorption/diagnostic imaging , Root Resorption/etiology , Root Resorption/pathology , Tooth Movement Techniques/methods , Tooth Root/diagnostic imaging , Tooth Root/surgery
10.
Angle Orthod ; 90(4): 524-531, 2020 07 01.
Article in English | MEDLINE | ID: mdl-33378490

ABSTRACT

OBJECTIVE: To determine the effect of alveolar decortication on orthodontically induced root resorption. MATERIALS AND METHODS: A total of 24 male Wistar rats (14 week old) were used. The rats were randomly divided into one of the following three groups: group 1 (control group), orthodontic tooth movement (OTM) for 2 weeks; group 2, OTM for 2 weeks + two alveolar decortications (2AD); group 3, OTM for 2 weeks + four alveolar decortications (4AD). The first molar was moved mesially for 2 weeks. Micro computed tomography was used to analyze root volume. In addition, histological sections were stained with Tartrate Resistant Acid Phosphatase (TRAP) to quantify the osteoclast number. RESULTS: The buccal root volume in OTM + 4AD group was decreased by 8.92% and 6.11% when compared with the OTM-only group and OTM + 2AD group, respectively. Similarly, the other four root volumes in the OTM + 4AD group was decreased by 8.99% and 5.24% when compared with the OTM-only group and OTM + 2AD group, respectively. There was a decrease in buccal root density in the OTM + 4AD group by 4.66% and 3.56% when compared with the OTM-only group and the OTM + 2AD group, respectively. In addition, there was an increase in the number of osteoclasts by 195.73% and 98.74% in OTM + 4AD group in comparison with the OTM and OTM + 2AD group. CONCLUSIONS: The amount of orthodontically induced root resorption was positively correlated with the extent of surgical injury used to accelerate orthodontic tooth movement.


Subject(s)
Root Resorption , Animals , Male , Osteoclasts , Rats , Rats, Wistar , Root Resorption/diagnostic imaging , Root Resorption/etiology , Tooth Movement Techniques/adverse effects , Tooth Root/diagnostic imaging , X-Ray Microtomography
12.
Dental Press J Orthod ; 25(4): 44-50, 2020.
Article in English | MEDLINE | ID: mdl-32965386

ABSTRACT

OBJECTIVE: To perform a numerical simulation using FEM to study the von Mises stresses on Mushroom archwires. METHODS: Mushroom archwires made of titanium-molybdenum alloy with 0.017 x 0.025-in cross-section were used in this study. A YS of 1240 MPa and a Young's modulus of 69 GPa were adopted. The archwire was modeled in Autodesk Inventor software and its behavior was simulated using the finite element code Ansys Workbench (Swanson Analysis Systems, Houston, Pennsylvania, USA). A large displacement simulation was used for non-linear analysis. The archwires were deformed in their extremities with 0° and 45°, and activated by their vertical extremities separated at 4.0 or 5.0 mm. RESULTS: Tensions revealed a maximum of 1158 MPa at the whole part of the loop at 5.0mm of activation, except in a very small area situated at the top of the loop, in which a maximum of 1324 Mpa was found. CONCLUSIONS: Mushroom loops are capable to produce tension levels in an elastic range and could be safely activated up to 5.0mm.


Subject(s)
Agaricales , Incisor , Biomechanical Phenomena , Elastic Modulus , Finite Element Analysis , Stress, Mechanical
13.
Prog Orthod ; 21(1): 23, 2020 Aug 24.
Article in English | MEDLINE | ID: mdl-32830306

ABSTRACT

OBJECTIVES: To evaluate the dental and skeletal effects that occur in the correction of anterior open bite with clear aligners. MATERIALS AND METHOD: In this single-center retrospective study, the mechanism of anterior open bite closure using clear aligners (Invisalign, Align Technology, Santa Clara, CA, USA) was evaluated by cephalometric superimposition based on records of patients consecutively treated by a single, experienced Invisalign provider. Inclusion criteria consisted of anterior open bite (overbite < 0.5 mm), adult patients (18+) at the beginning of treatment, consecutive records, and good quality pre- and post-treatment records, where the required landmarks were clearly visible. RESULTS: A total of 45 patients were included for data analysis with a mean age of 30.73 ± 8.0 years and initial open bite of - 1.21 ± 1.15 mm. During treatment, the upper incisors showed significant (p < 0.05) retraction [U1-SN'(°) = - 10.91 ± 6.95°], [U1-SN'perp(mm) = - 2.57 ± 1.75 mm] and extrusion [U1-SN'(mm) = 1.45 ± 0.89 mm]. The lower incisors also showed significant retraction [IMPA(°) = - 3.73 ± 4.91°), (ΔL1-MP'perp (mm) = - 1.08 ± 1.59] and extrusion (ΔL1-MP'(mm) = 0.53 ± 0.74). Regarding molar position, no significant changes were noted in the anteroposterior position of the upper [ΔU6-SN'perp(mm) = 0.01 ± 1.08 mm] and lower molar [ΔL6-MP'perp(mm) = 0.03 ± 0.87 mm]; however, there was a statistically significant intrusion of the upper [ΔU6-SN'(mm) = - 0.47 ± 0.59 mm] and lower molar [ΔL6-MP'(mm) = - 0.39 ± 0.76 mm]. CONCLUSION: Open bite closure with clear aligners occurred due to a combination of maxillary and mandibular incisor extrusion and maxillary and mandibular molar intrusion, with slight mandibular auto rotation. Significant retraction of maxillary and mandibular incisors was also observed with treatment. Clear aligners are effective in reducing/controlling the vertical dimension in open bite patients.


Subject(s)
Malocclusion, Angle Class II , Open Bite , Orthodontic Appliances, Removable , Adult , Cephalometry , Humans , Retrospective Studies , Tooth Movement Techniques , Young Adult
14.
Dental press j. orthod. (Impr.) ; 25(4): 44-50, July-Aug. 2020. tab, graf
Article in English | LILACS, BBO - Dentistry | ID: biblio-1133679

ABSTRACT

ABSTRACT Objective: To perform a numerical simulation using FEM to study the von Mises stresses on Mushroom archwires. Methods: Mushroom archwires made of titanium-molybdenum alloy with 0.017 x 0.025-in cross-section were used in this study. A YS of 1240 MPa and a Young's modulus of 69 GPa were adopted. The archwire was modeled in Autodesk Inventor software and its behavior was simulated using the finite element code Ansys Workbench (Swanson Analysis Systems, Houston, Pennsylvania, USA). A large displacement simulation was used for non-linear analysis. The archwires were deformed in their extremities with 0° and 45°, and activated by their vertical extremities separated at 4.0 or 5.0 mm. Results: Tensions revealed a maximum of 1158 MPa at the whole part of the loop at 5.0mm of activation, except in a very small area situated at the top of the loop, in which a maximum of 1324 Mpa was found. Conclusions: Mushroom loops are capable to produce tension levels in an elastic range and could be safely activated up to 5.0mm.


RESUMO Objetivo: Realizar uma simulação numérica, por meio do Método dos Elementos Finitos (MEF), para obter as tensões de von Mises em arcos Mushroom. Métodos: Foram usados arcos com geometria Mushroom de titânio-molibdênio, com secção transversal 0,017" x 0,025". Adotou-se valores de tensão de escoamento (σesc) de 1.240 MPa e módulo de elasticidade (E) de 69 GPa. O arco foi modelado por meio do software Autodesk Inventor, e seu desempenho foi simulado utilizando-se o software de elementos finitos Ansys Workbench (Swanson Analysis System, Houston, Pennsylvania, EUA). Para a simulação, foi considerada a análise para grandes deslocamentos. O arco foi conformado em suas extremidades considerando-se planos de 0° e 45°, pré-ativado em 2,5mm e ativado por meio de suas extremidades verticais, separadas 4,0 mm ou 5,0 mm. Resultados: As tensões revelaram um valor máximo de 1.158 MPa na maior parte da alça, aos 5,0 mm de ativação, com exceção de uma área muito pequena, com valor de 1.324 MPa, situada no topo da alça. Conclusões: Os arcos Mushroom são capazes de produzir níveis de tensão situados dentro da região elástica e poderiam ser ativados com segurança até os 5,0 mm de ativação.


Subject(s)
Titanium , Finite Element Analysis , Molybdenum , Nonlinear Dynamics
15.
Eur J Orthod ; 42(4): 378-386, 2020 09 11.
Article in English | MEDLINE | ID: mdl-32572439

ABSTRACT

INTRODUCTION: The aim of this study was to investigate the effect of supplemental vibratory force on biomarkers of bone remodelling during orthodontic tooth movement, the rate of mandibular anterior alignment (RMAA), and compliance with a vibration device. DESIGN, SETTINGS, AND PARTICIPANTS: Forty patients between the ages 15-35 undergoing fixed appliance treatment that presented to a university orthodontic clinic were randomly allocated to supplemental use of an intraoral vibrational device (n = 20, AcceleDent®) or fixed appliance only (n = 20). Salivary multiplex assay was completed to analyse the concentration of selected biomarkers of bone remodelling before treatment (T0) and at three following time points (T1, T2, T3), 4-6 weeks apart. Irregularity of the mandibular anterior teeth and compliance was assessed at the same trial time points. Data were analysed blindly on an intention-to-treat basis with descriptive statistics, Mann-Whitney U-test, Wilcoxon signed-rank test, and linear mixed effects regression modelling. RESULTS: No difference in the changes in salivary biomarkers of bone remodelling and RMAA between groups at any time point over the trial duration was observed. No correlation was found between changes in irregularity and biomarker level from baseline to another time point. Lastly, there was no association between RMAA and compliance with the AcceleDent® device. CONCLUSIONS: Supplemental vibratory force during orthodontic treatment with fixed appliances does not affect biomarkers of bone remodelling or the RMAA. LIMITATIONS: The main limitation of the study was the small sample size and the large variability in the salivary biomarkers. HARMS: No harms were observed during the duration of the trial. PROTOCOL: The protocol was not published prior to trial commencement. REGISTRATION: The study was registered in Clinical Trials.gov (NCT02119455) first posted on April 2014.


Subject(s)
Orthodontic Appliances, Fixed , Tooth Movement Techniques , Vibration , Adolescent , Adult , Biomarkers , Humans , Orthodontic Appliances , Pilot Projects , Young Adult
17.
Eur J Orthod ; 42(4): 371-377, 2020 09 11.
Article in English | MEDLINE | ID: mdl-32065225

ABSTRACT

BACKGROUND AND OBJECTIVES: Orthodontic relapse is a physiologic process that involves remodelling of the alveolar bone and principle periodontal ligament fibres. Raloxifene is an Food and Drug Administration (FDA)-approved selective oestrogen receptor modulator that inhibits systemic bone loss. In our study, we examined the effects of Raloxifene on alveolar bone modelling and orthodontic relapse in a rodent model. MATERIALS AND METHODS: The efficacy of raloxifene was evaluated in 15-week-old male Wistar rats, 8 in each group (Control, Raloxifene, Raloxifene + 7-day relapse, Raloxifene + 14-day relapse) for a total of 42 days. All animals had 14 days of orthodontic tooth movement with a closed nickel-titanium coil spring tied from incisors to right first molar applying 5-8 gm of force. On the day of appliance removal, impression was taken with silicon material and the distance between first molar and second molar was filled with light-cured adhesive resin cement for retention phase. Raloxifene Retention, Raloxifene Retention + 7D, Raloxifene Retention + 14D groups received 14 daily doses of raloxifene (2.0 mg/kg/day) subcutaneously after orthodontic tooth movement during retention. After 14 days of retention, the retainer was removed and right first molar was allowed to relapse for a period of 14 days. Raloxifene injection continued for the Raloxifene + 14-day relapse group during relapse phase too. Control group received saline injections during retention. Animals were euthanized by CO2 inhalation. The outcome measure included percentage of relapse, bone volume fraction, tissue density, and histology analysis using tartrate-resistant acid phosphatase staining and determining receptor activator of nuclear factor-кB-ligand (RANKL) and osteoprotegerin expression. RESULTS: Raloxifene Retention + 14D group had significantly less (P < 0.05) orthodontic relapse when compared with other groups. There was a significant increase (P < 0.05) in bone volume fraction and tissue density in the Raloxifene Retention + 14D group when compared with other groups. Similarly, there was significant decrease in number of osteoclasts and RANKL expression in Raloxifene Retention + 14D group when compared with Raloxifene Retention + 7D group (P < 0.05). CONCLUSION: Raloxifene could decrease post-orthodontic treatment relapse by decreasing bone resorption and indirectly enhancing bone formation.


Subject(s)
Raloxifene Hydrochloride/pharmacology , Tooth Movement Techniques , Animals , Bone Remodeling , Male , Molar , Osteoclasts , Rats , Rats, Wistar , Recurrence
18.
Am J Orthod Dentofacial Orthop ; 157(2): 228-239, 2020 Feb.
Article in English | MEDLINE | ID: mdl-32005475

ABSTRACT

INTRODUCTION: The objective of this study was to assess the reproducibility of cervical vertebral maturation (CVM) method based on the type of radiographic image and the level of experience and level of training of the evaluator. METHODS: Ten evaluators (5 orthodontic residents and 5 faculty members) were randomly divided into 2 groups: trained and untrained. All participants evaluated 80 radiographic images previously acquired in 4 different formats: (1) 2-dimensional (2D) digital (2D-digital), (2) 2D digitized hard copy from the Iowa Facial Growth Study (American Association of Orthodontists Foundation Craniofacial Growth Legacy Collection), (3) 2D digital reconstructed from a 3-dimensional (3D) radiograph (2D-from 3D), and (4) 3D cone-beam computerized tomographic (3D-CBCT) images. Agreement among evaluators on the morphology of the cervical vertebrae (CV) and the CVM stage of each radiographic image was assessed using Randolph's kappa statistic and Kendall's W coefficient of concordance. RESULTS: Interobserver agreement on the determination of a curvature on the inferior border of the CV was substantial to perfect, whereas agreement on shape was fair to moderate. Overall, the level training in all image types, except 3D-CBCTs, but not the level of experience affected the agreement for shape and curvature of the CVs. Interobserver agreement on CVM staging for all combined images was substantial at 0.72. Faculty had a higher level of agreement than residents except for 2D-digital and 3D-CBCT images, whereas trained evaluators had an overall higher level of agreement than untrained evaluators except for 3D-CBCT images. CONCLUSIONS: Interobserver agreement in determining CVM stage was substantial for all images evaluated; experience and training resulted in higher level of agreement for some image types. The 3D-CBCT images did not provide increased interobserver agreement over current 2D-digital lateral cephalograms in determining CVM staging or shape of the CV. The highest agreement in CVM staging was obtained on 2D-digital lateral cephalograms with training.


Subject(s)
Cephalometry , Cervical Vertebrae , Cone-Beam Computed Tomography , Orthodontics/education , Cervical Vertebrae/diagnostic imaging , Clinical Competence , Humans , Imaging, Three-Dimensional , Iowa , Observer Variation , Reproducibility of Results
19.
Eur J Orthod ; 42(3): 317-325, 2020 06 23.
Article in English | MEDLINE | ID: mdl-31147678

ABSTRACT

BACKGROUND: Accelerating orthodontic tooth movement (OTM) through biologically effective methods, such as increasing osteoclast-mediated alveolar resorption, could effectively shorten treatment time. OBJECTIVE: To evaluate an injectable formulation containing receptor activator of nuclear factor kappa-B ligand (RANKL) on the OTM. MATERIALS AND METHODS: We fabricated a RANKL formulation from 100 µl of 100 µg/ml RANKL adsorbed on 10 mg of poly(lactic acid-co-glycolic acid) microspheres embedded in a 10 wt% aqueous hydroxyethyl cellulose carrier gel. We characterized these formulations for the rate of RANKL release, and then tested for bioactivity using in vitro cell culture. In vivo OTM studies were conducted using 15 week old male Wistar rats for 14 days. We injected the RANKL formulations palatal to the left maxillary first molar and accomplished OTM with a nickel-titanium (NiTi) coil spring applying 5-8 g force. Control groups involved the application of NiTi coil spring with and without placebo formulation. The outcome measure included the distance of tooth movement, bone volume fraction, tissue density, and root volume determined with micro-computed tomography. We determined the amount of osteoclast activity using tartrate-resistant acid phosphatase (TRAP) staining. RESULTS: These formulations were able to sustain the release of RANKL for more than 30 days, and the released RANKL showed a positive effect on mice osteoclast precursor cells (RAW 264.7). Reported injectable RANKL formulations were effective in accelerating OTM compared with other control groups, with 129.2 per cent more tooth movement than no formulation and 71.8 per cent more than placebo formulation, corresponding with a significant increase in the amount of TRAP activity. We did not observe any significant differences in root resorption between the groups. CONCLUSION: Our study shows a significant increase in OTM with injectable formulations containing RANKL.


Subject(s)
Osteoclasts , Tooth Movement Techniques , Animals , Delayed-Action Preparations , Male , Mice , Rats , Rats, Wistar , X-Ray Microtomography
20.
Am J Orthod Dentofacial Orthop ; 156(5): 675-684, 2019 Nov.
Article in English | MEDLINE | ID: mdl-31677676

ABSTRACT

Orthognathic surgery is necessary when a patient's major complaints include skeletal discrepancies that cannot be corrected with orthodontic treatment alone. Currently, orthognathic surgery can be performed through conventional and surgery-first approaches. Some advantages are attributed to the surgery-first approach, such as shortened treatment time and immediate esthetic improvement. The aim of this case report is to present the retreatment of a patient presenting with a skeletal Class III malocclusion, with maxillary retrusion and mandibular protrusion, who was successfully treated with the surgery-first approach and customized lingual appliances, combined with miniplate anchorage in the postoperative orthodontic treatment. The total orthodontic treatment time was 8 months.


Subject(s)
Orthodontic Anchorage Procedures , Orthognathic Surgery , Orthognathic Surgical Procedures , Cephalometry , Esthetics, Dental , Humans , Orthodontic Appliances , Retreatment , Tongue
SELECTION OF CITATIONS
SEARCH DETAIL
...