Comparison between absorption and biological activity on the efficiency of the biotrickling filtration of gaseous streams containing ammonia.

Polluted air streams can be purified using biological treatments such as biotrickling filtration, which is one of the most widely accepted techniques successfully tuned to treat a wide variety of exhausted gaseous streams coming from a series of industrial sectors such as food processing, flavor manufacturers, rendering, and composting. Since the degradation of a pollutant occurs at standard pressure and temperature, biotrickling filtration, whether compared with other more energy-demanding chemical-physical processes of abatement (such as scrubbing, catalytic oxidation, regenerative adsorption, incineration, advanced oxidation processes, etc.), represents a very high energy-efficient technology. Moreover, as an additional advantage, biodegradation offers the possibility of a complete mineralization of the polluting agents. In this work, biotrickling filtration has been considered in order to explore its efficiency with respect to the abatement of ammonia (which is a highly water-soluble compound). Moreover, a complete mathematical model has been developed in order to describe the dynamics of both absorption and biological activities which are the two dominant phenomena occurring into these systems. The results obtained in this work have shown that the absorption phenomenon is very important in order to define the global removal efficiency of ammonia from the gaseous stream (particularly, 44% of the ammonia is abated by water absorption). Moreover, it has been demonstrated (through the comparison between experimental results and theoretical simulations) that the action of bacteria, which enhance the rate of ammonia transfer to the liquid phase, can be modeled through a simple Michaelis-Menten relationship.

Dust emission and dispersion from mineral storage piles.

Dust pollution is a complex problem of growing interest because of its environmental, health, economic and political impact. Environmental impact assessment methods for dust pollution management are often based on the simulation of dust dispersion, which requires a precise characterization of the source term and of the source parameters. The source term model should be as simple and as accurate as possible and requires low time consumption in order to be easily connected to a more complex algorithm for the dispersion calculations. This work focuses on dust emissions from mineral storage piles, which are usually modelled as source terms by means of the algorithm proposed in the AP-42 US EPA standard. Unfortunately, this algorithm tends to overestimate emissions, and when coupled with a Gaussian dispersion model, it leads to inaccurate results in terms of estimation of both concentration and spatial distribution. This paper proposes a new methodology drawn from the original standard US EPA AP-42 https://www3.epa.gov/ttnchie1/ap42/ch13/ scheme with the purpose to account for the actual dynamics of erosion and to enhance the accuracy of the concentration and the pollutant spatial distribution assessment, thereby considering the effects of the wind interactions. The standard EPA methodology and the new one were compared by means of the AERMOD and CALPUFF dispersion models. Results are superimposable in terms of concentration values, leading to a quantification of the same order of magnitude, although with a different and more variable spatial distribution.

Assessment of the Indoor Odour Impact in a Naturally Ventilated Room.

Indoor air quality influences people's lives, potentially affecting their health and comfort. Nowadays, ventilation is the only technique commonly used for regulating indoor air quality. CO2 is the reference species considered in order to calculate the air exchange rates of indoor environments. Indeed, regarding air quality, the presence of pleasant or unpleasant odours can strongly influence the environmental comfort. In this paper, a case study of indoor air quality monitoring is reported. The indoor field tests were conducted measuring both CO2 concentration, using a photoacoustic multi-gas analyzer, and odour trends, using an electronic nose, in order to analyze and compare the information acquired. The indoor air monitoring campaign was run for a period of 20 working days into a university room. The work was focused on the determination of both CO2 and odour emission factors (OEF) emitted by the human activity and on the evaluation of the odour impact in a naturally ventilated room. The results highlighted that an air monitoring and recycling system based only on CO2 concentration and temperature measurements might be insufficient to ensure a good indoor air quality, whereas its performances could be improved by integrating the existing systems with an electronic nose for odour detection.

Targeting FR-expressing cells in ovarian cancer with Fab-functionalized nanoparticles: a full study to provide the proof of principle from in vitro to in vivo.

Efficient targeting in tumor therapies is still an open issue: systemic biodistribution and poor specific accumulation of drugs weaken efficacy of treatments. Engineered nanoparticles are expected to bring benefits by allowing specific delivery of drug to the tumor or acting themselves as localized therapeutic agents. In this study we have targeted epithelial ovarian cancer with inorganic nanoparticles conjugated to a human antibody fragment against the folate receptor over-expressed on cancer cells. The conjugation approach is generally applicable. Indeed several types of nanoparticles (either magnetic or fluorescent) were engineered with the fragment, and their biological activity was preserved as demonstrated by biochemical methods in vitro. In vivo studies with mice bearing orthotopic and subcutaneous tumors were performed. Elemental and histological analyses showed that the conjugated magnetic nanoparticles accumulated specifically and were retained at tumor sites longer than the non-conjugated nanoparticles.

Emission of air pollutants from burning candles with different composition in indoor environments.

Candle composition is expected to influence the air pollutants emissions, possibly leading to important differences in the emissions of volatile organic compounds and polycyclic aromatic hydrocarbons. In this regard, the purity of the raw materials and additives used can play a key role. Consequently, in this work emission factors for some polycyclic aromatic hydrocarbons, aromatic species, short-chain aldehydes and particulate matter have been determined for container candles constituted by different paraffin waxes burning in a test chamber. It has been found that wax quality strongly influences the air pollutant emissions. These results could be used, at least at a first glance, to foresee the expected pollutant concentration in a given indoor environment with respect to health safety standards, while the test chamber used for performing the reported results could be useful to estimate the emission factors of any other candle in an easy-to-build standardised environment.

An inductively coupled plasma mass spectrometry method for the quantification of yttrium-antibody based drugs using stable isotope tracing.

Targeted radioimmunotherapy has been recently clinically validated and approved for the treatment of cancer by the US Food and Drug Administration. This therapeutic approach employs monoclonal antibodies directed to cancer-related, cell-surface antigens coupled to beta-emitting nuclides. 90Y is one of the most useful radioisotopes in the development of antibody based radioimmunotherapy and evaluation of the pharmacokinetic profile for 90Y-radiopharmaceuticals is usually performed by radiochemical methods. In this work we have developed an alternative radioactive-free approach to evaluate pharmacokinetic profiles based on the inductively coupled plasma mass spectrometric (ICP-MS) quantification of 89Y. A highly sensitive and rapid method for the determination of yttrium in urine is described and applied to evaluate the urinary clearance of antibody-based drugs labeled with the stable isotope of yttrium, 89Y. This approach overcomes some important limitations for pre-clinical radioanalytical methods such as radiation hazards and radioactive waste disposal. Method development was performed by determining detection and quantification limits, and precision as repeatability and trueness. These performance parameters fulfilled the acceptance criteria for bioanalytical methods.

2-Arylpropionic CXC chemokine receptor 1 (CXCR1) ligands as novel noncompetitive CXCL8 inhibitors.

The CXC chemokine CXCL8/IL-8 plays a major role in the activation and recruitment of polymorphonuclear (PMN) cells at inflammatory sites. CXCL8 activates PMNs by binding the seven-transmembrane (7-TM) G-protein-coupled receptors CXC chemokine receptor 1 (CXCR1) and CXC chemokine receptor 2 (CXCR2). (R)-Ketoprofen (1) was previously reported to be a potent and specific noncompetitive inhibitor of CXCL8-induced human PMNs chemotaxis. We report here molecular modeling studies showing a putative interaction site of 1 in the TM region of CXCR1. The binding model was confirmed by alanine scanning mutagenesis and photoaffinity labeling experiments. The molecular model driven medicinal chemistry optimization of 1 led to a new class of potent and specific inhibitors of CXCL8 biological activity. Among these, repertaxin (13) was selected as a clinical candidate drug for prevention of post-ischemia reperfusion injury.