Generality of Enhancing the Dissolution Rates of Free Acid Amorphous Solid Dispersions by the Incorporation of Sodium Hydroxide.

The incorporation of a counterion into an amorphous solid dispersion (ASD) has been proven to be an attractive strategy to improve the drug dissolution rate. In this work, the generality of enhancing the dissolution rates of free acid ASDs by incorporating sodium hydroxide (NaOH) was studied by surface-area-normalized dissolution. A set of diverse drug molecules, two common polymer carriers (copovidone or PVPVA and hydroxypropyl methylcellulose acetate succinate or HPMCAS), and two sample preparation methods (rotary evaporation and spray drying) were investigated. When PVPVA was used as the polymer carrier for the drugs in this study, enhancements of dissolution rates from 7 to 78 times were observed by the incorporation of NaOH into the ASDs at a 1:1 molar ratio with respect to the drug. The drugs having lower amorphous solubilities showed greater enhancement ratios, providing a promising path to improve the drug release performance from their ASDs. Samples generated by rotary evaporation and spray drying demonstrated comparable dissolution rates and enhancements when NaOH was added, establishing a theoretical foundation to bridge the ASD dissolution performance for samples prepared by different solvent-removal processes. In the comparison of polymer carriers, when HPMCAS was applied in the selected system (indomethacin ASD), a dissolution rate enhancement of 2.7 times by the incorporated NaOH was observed, significantly lower than the enhancement of 53 times from the PVPVA-based ASD. This was attributed to the combination of a lower dissolution rate of HPMCAS and the competition for NaOH between IMC and HPMCAS. By studying the generality of enhancing ASD dissolution rates by the incorporation of counterions, this study provides valuable insights into further improving drug release from ASD formulations of poorly water-soluble drugs.

The effect of tube quality on externally calibrated quantitative nuclear magnetic resonance analysis: How bad can it be?

Externally calibrated quantitative nuclear magnetic resonance (NMR) approaches offer practical means to simultaneously evaluate chemical identity and content without the addition of calibrants to the test sample. Despite continuous advances in external calibration over the last few decades, adoption of these approaches has been slower than expected. Variations in NMR tube geometry are a commonly overlooked factor that can have a substantial effect on externally calibrated quantitation methods. In this report, we investigate the extent to which tube-to-tube volume variability can affect quantitative NMR outcomes. The results highlight the importance of considering tube quality during the development stages of externally calibrated quantitative methods. In addition, we propose a simple, yet effective volume correction strategy using the residual protonated solvent signal that, based on experiments with mixed NMR tubes of varying quality, alleviates the effect of tube-to-tube variability.

Reaction monitoring via benchtop nuclear magnetic resonance spectroscopy: A practical comparison of on-line stopped-flow and continuous-flow sampling methods.

The ability for nuclear magnetic resonance (NMR) spectroscopy to provide quantitative, structurally rich information makes this spectroscopic technique an attractive reaction monitoring tool. The practicality of NMR for this type of analysis has only increased in the recent years with the influx of commercially available benchtop NMR instruments and compatible flow systems. In this study, we aim to compare 19F NMR reaction profiles acquired under both on-line continuous-flow and stopped-flow sampling methods, with modern benchtop NMR instrumentation, and two reaction systems: a homogeneous imination reaction and a biphasic activation of a carboxylic acid to acyl fluoride. Reaction trends with higher data density can be acquired with on-line continuous-flow analyses, and this work highlights that representative reaction trends can be acquired without any correction when monitoring resonances with a shorter spin-lattice relaxation time (T1), and with the used flow conditions. On-line stopped-flow analyses resulted in representative reaction trends in all cases, including the monitoring of resonances with a long T1, without the need of any correction factors. The benefit of easier data analysis, however, comes with the cost of time, as the fresh reaction solution must be flowed into the NMR system, halted, and time must be provided for spins to become polarized in the instrument's external magnetic field prior to spectral measurement. Results for one of the reactions were additionally compared with the use of a high-field NMR.

A reliable external calibration method for reaction monitoring with benchtop NMR.

Nuclear magnetic resonance (NMR) spectroscopy is a powerful analytical technique with the ability to acquire both quantitative and structurally insightful data for multiple components in a test sample. This makes NMR spectroscopy a desirable tool to understand, monitor, and optimize chemical transformations. While quantitative NMR (qNMR) approaches relying on internal standards are well-established, using an absolute external calibration scheme is beneficial for reaction monitoring as resonance overlap complications from an added reference material to the sample can be avoided. Particularly, this type of qNMR technique is of interest with benchtop NMR spectrometers as the likelihood of resonance overlap is only enhanced with the lower magnetic field strengths of the used permanent magnets. The included study describes a simple yet robust methodology to determine concentration conversion factors for NMR systems using single- and multi-analyte linear regression models. This approach is leveraged to investigate a pharmaceutically relevant amide coupling batch reaction. An on-line stopped-flow (i.e., interrupted-flow or paused-flow) benchtop NMR system was used to monitor both the 1,1'-carbonyldiimidazole (CDI) promoted acid activation and the amide coupling. The results highlight how quantitative measurements in benchtop NMR systems can provide valuable information and enable analysts to make decisions in real time.

Characterization of antisense oligonucleotide and guide ribonucleic acid diastereomers by hydrophilic interaction liquid chromatography coupled to mass spectrometry.

Oligonucleotides have become an essential modality for a variety of therapeutic approaches, including cell and gene therapies. Rapid progress in the field has attracted significant research in designing novel oligonucleotide chemistries and structures. Beyond their polar nature, the length of large RNAs and presence of numerous diastereomers for phosphorothioate (PS)-modified RNAs pose heightened challenges for their characterization. In this study, the stereochemistry of a fully-modified antisense oligonucleotide (ASO) and partially-modified guide RNAs (gRNAs) was investigated using HILIC and orthogonal techniques. The profiles of three lots of a fully-modified ASO with PS linkages were compared using ion-pairing RPLC (IPRP) and HILIC. Interestingly, three isomer peaks were partially resolved by HILIC for two lots while only one peak was observed on the IPRP profile. Model oligonucleotides having the same sequence of the five nucleotides incorporated to the 3'-end of the gRNA but differing in their number and position of PS linkages were investigated by HILIC, IPRP, ion mobility spectrometry-mass spectrometry (IM-MS) and nuclear magnetic resonance (NMR). An strategy was ultimately designed to aid in the characterization of gRNA stereochemistry. Ribonuclease (RNase) T1 digestion enabled the characterization of gRNA diastereomers by reducing their number from 32 at the gRNA intact level to 4 or 8 at the fragment level. To our knowledge, this is the first time that HILIC has successfully been utilized for the profiling of diastereomers for various oligonucleotide formats and chemical modifications.

Toward the Development of Rapid, Automated Identification Tests for Neat Organic Liquids Using Benchtop NMR Instrumentation.

The advent of benchtop nuclear magnetic resonance (NMR) instrumentation has paved the way for the use of this technology away from traditional NMR facility settings. Still, a wider adoption of benchtop NMR systems for routine identification testing has been hampered by inherent instrumental limitations (including low sensitivity and reduced signal dispersion) and workflow automation challenges. The present study summarizes the results of a cross-company collaboration aiming at the development of rapid, automated identification tests for incoming materials in liquid form intended for pharmaceutical manufacturing. Potential scenarios that analysts may encounter during the development of identification tests using benchtop NMR instrumentation are described, and suitable strategies for data collection and analysis are discussed. Challenges and opportunities for benchtop NMR implementation are illustrated using common organic solvents and laboratory reagents in a neat form, for which reference NMR data are provided.

Analytical techniques for characterizing diastereomers of phosphorothioated oligonucleotides.

Oligonucleotides have emerged as powerful therapeutics for treating diverse diseases. To fully unlock the therapeutic potential of oligonucleotides, there is still a great need to further improve their drug-like properties. Numerous chemical modifications have been explored to achieve this goal, with phosphorothioation being one of the most widely used strategies. However, phosphorothioate modification produces diastereomers that are reported to have different properties and performances, demanding detailed characterization of these diastereomers. Here we provide an overview of phosphorothioated oligonucleotide diastereomers, covering their origin and configurations, physicochemical and pharmacological properties, and stereo-selective chemical synthesis, followed by a summary of currently available analytical techniques for characterizing these diastereomers, with a focus on liquid chromatography-based approaches, including ion-pair reversed-phase liquid chromatography, anion exchange chromatography, mixed-mode chromatography, and hybrid approaches. Non-chromatographic techniques, such as capillary electrophoresis, spectroscopy and other methods, are also being reviewed.

Precipitation Behavior of Highly Soluble Amphiphilic Drugs in Solution: Physical Instability of Drugs in Solution.

Physical instability of aqueous drug solutions, such as precipitation upon storage, has so far been difficult to predict or model. Understanding the molecular basis of such phenomena can help mitigate by influencing the product composition and by providing a mechanistic basis of experimental and in silico investigations. In this study, inconsistent precipitation of a model drug, GNE-01 in aqueous solutions was investigated. Chromatographic analyses of the drug solution that showed precipitation upon storage versus the one that did not indicate lack of covalent modification or degradation of the drug, suggesting that the precipitation was a physical phenomenon. Molecular level investigations were conducted using surface tension measurement and nuclear magnetic resonance (NMR) spectroscopy. The studies revealed self-association of the weakly basic drug in solution at slightly acidic pH values which was strengthened by the presence of polyionic excipients. The role of polyionic excipients in facilitating drug precipitation on storage was indicative of shifting solution equilibria in favor of a lower solubility drug-excipient complex. This study highlighted the importance of molecular understanding in mitigating difficult to predict physical instability of self-associating drugs in solution.

Elucidating the structure and cytochrome P450-mediated mechanism for novel metabolites of GDC-0575 in rats.

1. GDC-0575 is an ATP-competitive small-molecule inhibitor of ChK1 that is being developed by Genentech for the treatment of various human malignancies.2. In a radiolabeled mass balance study of GDC-0575 in rats, two novel metabolites, named M12 (-71 Da,) and M17 (+288 Da), were detected as abundant circulating metabolites.3. Subsequent mass spectrometry and nuclear magnetic resonance analysis showed that M12 was a cyclized metabolite of GDC-0575, whereas M17 was its heterodimer to the parent. We further determined that M12 was mainly generated by cytochrome P450 (Cyp) 2d2.4. We proposed the potential mechanism was initiated by the oxidation on the pyrrole ring and subsequent cyclisation of the free primary amine onto C-3 of the pyrrole ring. This was followed by expulsion of cyclopropylcarboxamide and a loss of water to form intermediate I, which can be further oxidised to form M12, or dimerise with another molecule of GDC-0575 as nucleophile to form M17.5. To verify this hypothesis, we attempted to trap the intermediate I with glutathione (GSH) trapping assay and the GSH conjugate on the pyrrole ring was identified. This suggests the oxidation on the pyrrole led to reactive metabolite formation and supported this proposed mechanism.

The qNMR Summit 5.0: Proceedings and Status of qNMR Technology.

The goal of the qNMR Summit is to take stock of the status quo and the recent developments in qNMR research and applications in a timely and accurate manner. It provides a platform for both advanced and novice qNMR practitioners to receive a well-rounded update and discuss potential qNMR-related applications and collaborations. For over a decade, scientists from academia, industry, nonprofit institutions, and governmental bodies have focused on the standardization of qNMR methodology, as well as its metrological and pharmacopeial utility. This paper reviews key content of qNMR Summits 1.0 to 4.0 and puts into perspective the outcomes and available transcripts of the October 2019 Summit 5.0, with attendees from the United States, Canada, Japan, Korea, and several European countries. Summit presentations focused on qNMR methodology in the pharmaceutical industry, advanced quantitation algorithms, and promising developments.

Antitumor activity of Lepidium latifolium and identification of the epithionitrile 1-cyano-2,3-epithiopropane as its major active component.

Consumption of Brassica (Cruciferae) vegetables is associated with a reduced risk of cancer, but identification of the active components and insights into the underlying molecular events are scarce. Here we found that an extract of Lepidium latifolium, a cruciferous plant native to southern Europe, Mediterranean countries and Asia, showed in vitro cytotoxic activity, inducing caspase-dependent apoptosis, in a variety of human tumor cells, and the plant juice showed in vivo antitumor activity in a HT-29 human colon cancer xenograft mouse model. The epithionitrile 1-cyano-2,3-epithiopropane (CETP) was identified as the major active cancer cell-killing principle of L. latifolium. Synthetic and plant-derived CETP displayed similar proapoptotic activities as assessed by biochemical and morphological analyses. Analysis of the antiproliferative capacity of CETP on a wide number of cancer cell lines from the NCI-60 cell line panel followed by COMPARE analysis, showed an activity profile different from known anticancer agents. Flow cytometry and biochemical analyses revealed that CETP-induced apoptosis involved mitochondria, as assessed by loss of mitochondrial transmembrane potential and generation of reactive oxygen species, while overexpression of Bcl-XL and Bcl-2 prevented CETP-induced apoptosis. Inhibition of reactive oxygen species by glutathione and N-acetyl cysteine reduced the apoptotic response induced by CETP. FADD dominant negative form, blocking Fas/CD95 signaling, and a specific caspase-8 inhibitor also inhibited CETP-induced killing. Taken together, our data suggest that the cancer cell-killing action of CETP, involving both intrinsic and extrinsic apoptotic signaling pathways, underlies the antitumor activity of L. latifolium plant, which could be of potential interest in cancer treatment.

Structural Sequencing of Oligopeptides Aided by 1H Iterative Full-Spin Analysis.

This report describes an approach using 1H NMR iterative full-spin analysis (HiFSA) to extract definitive structural information on unknown peptides from 1D 1H NMR data. By comparing the experimental data and HiFSA fingerprint of a known analogue, it is possible to isolate the characteristic 1H subspectrum of the different amino acids and, thus, elucidate the structure of the peptide. To illustrate this methodology, a comprehensive analysis of five new anti-Mycobacterium tuberculosis peptides (2-6), all analogues of ecumicin (1), was carried out. The method was validated by demonstrating congruence of the HiFSA-based structures with all available data, including MS and 2D NMR. The highly reproducible HiFSA fingerprints of the new ∼1600 amu peptides were generated in this process. Besides oligo-peptides, the HiFSA sequencing approach could be extended to all oligomeric compounds consisting of chains of monomers lacking H-H spin-spin coupling across the moieties. HiFSA sequencing is capable of differentiating complex oligomers that exhibit minor structural differences such as shifted hydoxyl or methyl groups. Because it employs the basic and most sensitive 1D 1H NMR experiment, HiFSA sequencing enables the exploration of peptide analogues up to at least 2000 amu, even with basic contemporary spectrometers and when only sub-milligram amounts of isolates are available.

Copper-Catalyzed Aerobic Oxidative Amidation of Benzyl Alcohols.

A Cu-catalyzed synthesis of amides from alcohols and secondary amines using the oxygen in air as the terminal oxidant has been developed. The methodology is operationally simple requiring no high pressure equipment or handling of pure oxygen. The commercially available, nonprecious metal catalyst, Cu(phen)Cl2, in conjunction with di-tert-butyl hydrazine dicarboxylate and an inorganic base provides a variety of benzamides in moderate to excellent yields. The pKa of amine conjugate acid and electronics of alcohol were shown to impact the selection of base for optimal reactivity. A mechanism consistent with the observed reactivity trends, KIE, and Hammett study is proposed.

Bioautography with TLC-MS/NMR for Rapid Discovery of Anti-tuberculosis Lead Compounds from Natural Sources.

While natural products constitute an established source of lead compounds, the classical iterative bioassay-guided isolation process is both time- and labor-intensive and prone to failing to identify active minor constituents. (HP)TLC-bioautography-MS/NMR, which combines cutting-edge microbiological, chromatographic, and spectrometric technologies, was developed to accelerate anti-tuberculosis (TB) drug discovery from natural sources by acquiring structural information at a very early stage of the isolation process. Using the avirulent, bioluminescent Mtb strain mc27000 luxABCDE, three variations of bioautography were evaluated and optimized for sensitivity in detecting anti-TB agents, including established clinical agents and new leads with novel mechanisms of action. Several exemplary applications of this approach to microbial extracts demonstrate its potential as a routine method in anti-TB drug discovery from natural sources.

Ligand-Controlled Synthesis of Azoles via Ir-Catalyzed Reactions of Sulfoxonium Ylides with 2-Amino Heterocycles.

An iridium-catalyzed method was developed for the synthesis of imidazo-fused pyrrolopyrazines. The presence or absence of a nitrogenated ligand controlled the outcome of the reaction, leading to simple ß-keto amine products in the absence of added ligand and the cyclized 7- and 8-substituted-imidazo[1,2-a]pyrrolo[2,3-e]pyrazine products in the presence of ligand. This catalyst control was conserved across a variety of ylide and amine coupling partners. The substrate was shown to act as a ligand for the iridium catalyst in the absence of other ligands via NMR spectroscopy. Kinetic studies indicated that formation of the Ir-carbene was reversible and the slow step of the reaction. These mechanistic investigations suggest that the ß-keto amine products form via an intramolecular carbene N-H insertion, and the imidazopyrrolopyrazines form via an intermolecular carbene N-H insertion.

Pd-Catalyzed Synthesis of Aryl and Heteroaryl Triflones from Reactions of Sodium Triflinate with Aryl (Heteroaryl) Triflates.

A novel method for Pd-catalyzed triflination of aryl and heteroaryl triflates using NaSO2CF3 as the nucleophile is described. The combination of Pd2(dba)3 and RockPhos formed the most effective catalyst. A broad range of functional groups and heteroaromatic compounds were tolerated under the neutral reaction conditions. The order of reactivity ArOTf ≥ ArCl ≥ ArBr is consistent with transmetalation being a slow step of the reaction.

Digital NMR profiles as building blocks: assembling ¹H fingerprints of steviol glycosides.

This report describes a fragment-based approach to the examination of congeneric organic compounds by NMR spectroscopy. The method combines the classic interpretation of 1D- and 2D-NMR data sets with contemporary computer-assisted NMR analysis. Characteristic NMR profiles of key structural motifs were generated by (1)H iterative full spin analysis and then joined together as building blocks to recreate the (1)H NMR spectra of increasingly complex molecules. To illustrate the methodology described, a comprehensive analysis of steviol (1), seven steviol glycosides (2-8) and two structurally related isosteviol compounds (9, 10) was carried out. The study also assessed the potential impact of this method on relevant aspects of natural product research including structural verification, chemical dereplication, and mixture analysis.

A galloylated dimeric proanthocyanidin from grape seed exhibits dentin biomodification potential.

Grape seeds are a rich source of polyphenols, especially proanthocyanidins (PACs), and are also known for the presence of galloylated oligomeric PACs (OPACs). The present study focuses on the phytochemical methodology for grape seed (O)PACs and their potential role as dentin biomodifiers to be used in restorative and reparative dentistry. A new method using centrifugal partition chromatography (CPC) was developed for the preparative separation of the grape seed (O)PACs. Orthogonal phytochemical profiling of the resulting CPC fractions was performed using C18 and diol HPLC, normal phase HPTLC, and IT-TOF MS analysis. A galloylated procyanidin dimer (1) was isolated from a CPC fraction in order to evaluate its potential to enhance dentin bio-mechanical properties. Moreover, it helped to evaluate the impact of the galloyl moiety on the observed bioactivity. Structure elucidation was performed using ESI-MS, 1D and 2D NMR analyses. For the first time, (1)H iterative full spin analysis (HiFSA) was performed on this type of molecule, enabling a detailed proton chemical shift and coupling constant assignment. The CPC fractions as well as 1 showed promising results in the dentin stiffness bioassay and indicate that they may be used as dental intervention biomaterial.