Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 2 de 2
Filter
Add more filters










Database
Language
Publication year range
1.
J Colloid Interface Sci ; 387(1): 213-20, 2012 Dec 01.
Article in English | MEDLINE | ID: mdl-22959892

ABSTRACT

This work demonstrates the use of amino functionalized Mg-phyllosilicate clay/Nafion nanocomposite film embedded with Pt nanoparticles (Pt/AC/N) for catalyzing oxygen reduction reaction (ORR) in sulphuric acid medium. Pt/AC/N nanocomposite films were surface characterized using transmission electron microscope. Cyclic and linear scan voltammetry studies were carried out under hydrodynamic conditions taking rotating-ring disc electrode (RRDE) as the working electrode. The effects of clay content, Pt mass loading, electrode rotation rate, and temperature on the ORR kinetics were studied. The Tafel slopes were found to vary between 118 and 126 mV dec(-1) indicating a good ORR kinetics. The exchange current density values calculated after mass transfer correction ranged from 5.8×10(-7) to 2.4×10(-6) A cm(-2). From the RRDE disc currents, Koutecky-Levich plots were constructed and the ORR mechanism was found to follow a four electron path with minimum H(2)O(2) formation of ∼1.6%. The effect of temperature on ORR kinetics was found at 25, 40, and 50°C. The energy of activation calculated to be 7.68 kJ mol(-1) and comparable to the standard Pt/C catalyzed ORR systems.

2.
ACS Appl Mater Interfaces ; 4(7): 3620-6, 2012 Jul 25.
Article in English | MEDLINE | ID: mdl-22758652

ABSTRACT

A novel Pt nanoparticle (Pt NP) embedded aminoclay/Nafion (Pt/AC/N) nanocomposite catalyst film was prepared for oxygen reduction reaction by sol-gel method. The prepared nanocomposite films were surface characterized using XRD and TEM and thermal stability was studied by TGA. The prepared film has firmly bound Pt NP and could exhibit an improved electro-reduction activity compared to vulcan carbon/Nafion supported Pt NP (Pt/VC/N). Moreover, the Pt/AC/N film possessed good stability in the acidic environment. The limiting current density of the Pt/AC/N film with 35.4 µg/cm(2) of Pt loading was found to be 4.2 mA/cm(2), which is 30% higher than that of the Pt/VC/N. The maximum H2O2 intermediate formation was found to be ∼1.6% and the reaction found to follow a four electron transfer mechanism. Accelerated durability test for 2000 potential cycles showed that ca. 78% of initial limiting current was retained. The results are encouraging for possible use of the Pt/AC/N as the free-standing electrocatalyst layer for polymer electrolyte membrane fuel cells.

SELECTION OF CITATIONS
SEARCH DETAIL
...