The Effect of Cooling Rate on Crystallographic Features of Phase Transformations in Zr-2.5Nb.

Zirconium (Zr) alloys are utilized as structural components for the cores of nuclear reactors due to the excellent combination of their mechanical properties and corrosion resistance under intense neutron irradiation conditions in water. The characteristics of microstructures formed during heat treatments play a crucial role in obtaining the operational performance of parts made from Zr alloys. This study investigates the morphological features of (α + ß)-microstructures in the Zr-2.5Nb alloy, as well as the crystallographic relationships between α- and ß-phases. These relationships are induced by the ß→α(α″) displacive transformation that occurs during water quenching (WQ) and the diffusion-eutectoid transformation that takes place during furnace cooling (FC). To conduct this analysis, samples solution treated at 920 °C were examined using EBSD and TEM. The experimental distribution of α/ß-misorientations for both cooling regimes deviates from the Burgers orientation relationship (BOR) at a discrete set of angles close to 0, 29, 35, and 43°. The experimental α/ß-misorientation spectra are confirmed by crystallographic calculations for the ß→α→ß-transformation path based on the BOR. Similar spectra of misorientation angle distribution in α-phase and between α and ß phases in Zr-2.5Nb after WQ and FC point to similar transformation mechanisms and the significant role of shear and shuffle in ß→α-transformation.

A Review-Additive Manufacturing of Intermetallic Alloys Based on Orthorhombic Titanium Aluminide Ti2AlNb.

Titanium alloys based on orthorhombic titanium aluminide Ti2AlNb are promising refractory materials for aircraft engine parts in the operating temperature range from 600-700 °C. Parts made of Ti2AlNb-based alloys by traditional technologies, such as casting and metal forming, have not yet found wide application due to the sensitivity of processability and mechanical properties in chemical composition and microstructure compared with commercial solid-solution-based titanium alloys. In the last three decades, metal additive manufacturing (MAM) has attracted the attention of scientists and engineers for the production of intermetallic alloys based on Ti2AlNb. This review summarizes the recent achievements in the production of O-phase-based Ti alloys using MAM, including the analysis of the feedstock materials, technological processes, machines, microstructure, phase composition and mechanical properties. Powder bed fusion (PBF) and direct energy deposition (DED) are the most widely employed MAM processes to produce O-phase alloys. MAM provides fully dense, fine-grained material with a superior combination of mechanical properties at room temperature. Further research on MAM for the production of critical parts made of Ti2AlNb-based alloys can be focused on a detailed study of the influence of post-processing and chemical composition on the formation of the structure and mechanical properties, including cyclic loading, fracture toughness, and creep resistance.

Crystallographic Features of Phase Transformations during the Continuous Cooling of a Ti6Al4V Alloy from the Single-Phase ß-Region.

Crystallographic relationships between α- and ß-phases resulting from phase transformations, which took place during the continuous water quenching (WQ), air cooling (AC) and furnace cooling (FC) of a Ti6Al4V plates solution treated at 1065 °C, were investigated by methods of electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). WQ, AC and FC resulted in typical martensite, basket-weave and parallel-plate Widmanstatten structures, respectively. The experimental distribution of α/ß-misorientations deviated from BOR at set discrete angles close to 22, 30, 35 and 43°. The experimental spectra of angles were confirmed by theoretical calculations of the possible misorientations between the α and ß phases through the ßo→α→ßII -transformation path based on Burgers orientation relationship (BOR). Joint analysis of the experimental data and theoretical calculations revealed that the secondary ßII-phase was precipitated according to the sequence ßo→α→ßII during continuous cooling from the single-phase ß-region. Similar spectra for α/ß-phase misorientations for all investigated cooling rates acknowledged the similar transformation mechanisms and dominant shear component of the phase transformations.