ABSTRACT
INTRODUCTION: Multiple force vector applications may be indicated when an arch segment or en masse intrusion is needed. This finite element method study aimed to evaluate the total deform the stress yielded in the bone and the miniplate when forces with different directions and magnitudes were applied. METHODS: First, the prototyped skull model was fabricated on the basis of computed tomography (CT) scans. On this model, the miniplate was fixed, and orthodontic appliances were attached. Then, a 3-dimensional finite element model was constructed by reproducing the characteristics of the physical model. Seven situations were investigated, which diverged in the point of force application, the direction and the number of force vectors, and the force magnitudes. RESULTS: When the force was applied at 1 point, similar behavior could be observed concerning the deformation and the stress in the miniplate, the maxilla, and the screw holes. Most deformation and stress appeared in the transmucosal arm below the step bend and at the force application point. The angled vectors (-45° and 30°) presented smaller values concerning the vertical vectors. Similar or better performances could be observed when the forces were simultaneously applied at the 2 points. CONCLUSIONS: The newly designed miniplate showed similar or improved performances when multiple vectors were applied at the 2 points simultaneously compared with the force applied at 1 point. This newly designed miniplate may present improved performance in a clinical situation when multiple forces are demanded.
